fuse PPTC for overcurrent protection in photovoltaic street light controllers
fuse PPTC for overcurrent protection in photovoltaic street light controllers
Because the intelligent control part of this new type of LED explosion-proof light is completed through RS485 serial communication, it was found in practical applications that the 485 interface chip is easily burned out. After analysis, overvoltage protection was not done properly, so the TVS tube was selected as the overvoltage protection circuit, and it was found that it is still easy to be burned out by lightning.
An overcurrent protection scheme using a self recovery fuse TVS tube experiment was successful, greatly improving the reliability of the explosion-proof lamp.
The self restoring fuse PPTC is an overcurrent protector, also known as a ten thousand fuse, also known as a self resetting overcurrent protector or a polymer self restoring fuse. When it operates normally, it has low resistance. When the RS485 port of the explosion-proof lamp encounters high voltage input or lightning, it will trigger the conduction of the TVS to generate a large current, which will cause the self restoring fuse to suddenly change into a high resistance, limiting the current passing through the TVS and achieving the purpose of protecting the TVS and 485 circuits.
Fig.1
- |
- +1 赞 0
- 收藏
- 评论 0
本文由三年不鸣转载自XC News,原文标题为:automotive blade fuse colours.fuse PPTC for overcurrent protection in photovoltaic street light controllers),本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
What is A Self Recovery Fuse
Self recovery fuse is an overcurrent electronic protection component that uses a polymer organic polymer under high pressure, high temperature, and sulfurization reaction conditions.After mixing with conductive particle materials, it is processed through a special process. Habitually applying PPTC (Polymer Positive Temperature).
设计经验 发布时间 : 2023-12-05
Selection Guide of Self Recovery Fuse
Self recovery fuses are widely used for overcurrent protection of power lines, communication lines, and I/O ports in electronic products such as communication, security, industrial, automotive, and consumer products. So, in actual circuit protection, how should we choose the appropriate model of self recovery fuse to achieve the best protection effect?
设计经验 发布时间 : 2023-12-21
What are the Standard Requirements for Self Restory Fuse Technology?
Self recovery fuse is a type of overcurrent electronic protection component, which is made by mixing conductive particle materials with polymer organic polymers under high pressure, high temperature, and vulcanization reaction conditions, and processed through special processes. What are the standard requirements for self restoring fuse technology? 1. The rated zero power resistance PPTC thermistor should be packaged in different levels according to the zero power resistance, and the resistance range should be indicated on the outer packaging.
设计经验 发布时间 : 2023-11-27
SMD fuse and Chip Fuse Specifications
SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.
技术探讨 发布时间 : 2023-12-04
Description of Metal Materials for Self Recovering Fuses
PPTC self-healing fuses play a role in limiting current and achieving circuit protection. There are various specifications and models of self-healing fuses. This article introduces the metal materials used for Self Recovering Fuses.
技术探讨 发布时间 : 2024-09-10
Self Recovery Fuse Specification, Must Understand
Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.
技术探讨 发布时间 : 2023-12-02
What Is The Difference between Resettable Fuses and Traditional Fuses?
PPTC and fuses both do the same job: protecting electronic circuits from overcurrent related issues. The difference is that the fuse must be replaced after tripping, while PPTC can reset itself. PPTC can handle sudden overcurrent events without the need for replacement.
技术探讨 发布时间 : 2024-09-04
Parameters of Self Restoring Fuses
Rated voltage refers to the high voltage that can be withstood after the self recovery fuse is disconnected. The voltage borne by both ends of a self restoring fuse during the connection period is far less than its rated voltage. When selecting a self restoring fuse, it is generally required that its rated voltage be greater than the effective circuit voltage.
技术探讨 发布时间 : 2023-11-28
The Operating Principle of Self Recovering Fuse PPTC in USB Protection
Self healing fuse (PPTC) is a very important electronic component widely used in the protection of USB interfaces. It has the characteristics of automatic protection and automatic recovery. When the current exceeds the set value, the circuit will be immediately cut off, and when the current returns to the normal range, the path will be automatically restored.
技术探讨 发布时间 : 2024-08-29
How to Select the Type of Self Recovery Fuse for Procurement?
The selection of self restoring fuses has always been a classic topic in the electronics industry. On the way to PTC selection, there is always a model that belongs to you, accompanied by the “Six Steps“ of ensuring power supply.
设计经验 发布时间 : 2023-12-20
The Application of Self Recovery Fuse in Rechargeable Battery Pack
The ultra-small package (0402 specifications) is very suitable for secondary protection of circuits and is suitable for applications with limited space, such as handheld portable electronic devices.
技术探讨 发布时间 : 2024-01-05
Explanation of Parameters in the PPTC Specification for Self Healing Fuses
This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.
技术探讨 发布时间 : 2024-08-21
How Long Does the self Recovery Fuse Operate?
Is there a relationship between the self recovery fuse and the action time, and what is the action time?
技术探讨 发布时间 : 2023-12-28
The Application of Self Recovery Fuses in the Horn System
The protection requirements for the horn system are relatively strict. Ordinary fuses only provide one-time protection in the horn, increasing the repair rate of the product; In addition, additional fuse boxes and wires increase the manufacturer‘s costs.
技术探讨 发布时间 : 2023-12-30
Experience in Selecting Self Recovering Fuses
Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.
设计经验 发布时间 : 2024-08-16
电子商城
登录 | 立即注册
提交评论