The Development Trend of LED Power Drivers
The development trend of LED power supply driver - LED power supply driver is a voltage converter that converts the power supply into a specific voltage and current to drive LED lighting. In recent years, with the development of LED, the development trend of LED power drivers has become particularly evident. Today, I will briefly explain the development trend of LED power drivers to you.
Firstly, a series of constant voltage and current control electronic circuits are developed based on the characteristics of LEDs. Integrated circuit technology is used to control the input current of each LED at the optimal current value, enabling the LED to obtain stable current and generate the highest output luminous flux. It is best to control the size of the LED current when the input voltage and environmental temperature of the LED driver power supply change. (Related knowledge: Classification of LED backlight sources)
Secondly, the LED driver power supply has an intelligent control function, allowing the load current of the LED to be controlled at a predetermined level under the influence of various factors. When the load current changes due to various factors, the primary control IC can control the switch to return the load current to the initial design value.
The development trend of LED power drivers - in terms of control circuit design, it is necessary to develop towards centralized control, standard modularization, and system scalability.
Fig.1
- |
- +1 赞 0
- 收藏
- 评论 0
本文由三年不鸣转载自XC News,原文标题为:The Development Trend of LED Fuses Power Driver.supercheap auto blade fuse holder,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【技术】一文带你正确认识保险丝的熔断特性及熔化热能值
文章由旭程电子带各位工程师正确认识保险丝的熔断特性及熔化热能值。熔断特性即电流保险丝所加负载电流与保险丝熔断时间的关系,熔化热能值(I2T)是指使保险丝的熔断体熔化,部份汽化的切断电流所需要的公称能量值,简单说就是使保险丝熔断所需的最小热能值。
技术探讨 发布时间 : 2021-11-05
Is the Fuse Lead or Tin
The material of fuses is usually not simply lead or tin, but alloys of various components such as lead tin alloys.
技术探讨 发布时间 : 2024-09-20
Fuse Material Has A Decisive Impact on Its Performance
Fuses are generally made of silver copper alloy with high resistivity and low melting point. This alloy has good conductivity and melting characteristics, which can quickly melt when the current is too high, thus protecting the circuit. Early fuses were often made of lead antimony alloy, but due to safety reasons, this material has been phased out.
技术探讨 发布时间 : 2024-08-23
【经验】一文带你了解保险丝的熔断时间
保险丝的熔断时间能比较直观的反应保险丝保护性能的好坏,它是保险丝的一个重要参数,实际的熔断时间分为预飞弧时间和飞弧时间,在数据上用I-t曲线和I-t表格来体现,也叫熔断特性或安秒特性,本文旭程带你解析保险丝的熔断时间。
设计经验 发布时间 : 2021-12-21
旭程保险丝选型表
提供旭程保险丝选型,操作温度-40℃至+125℃,额定电流涵盖250mA-20A,额定电压250VAC或63VDC。产品均符合RoHS、REACH法规要求,尺寸规格涵盖广。
产品型号
|
品类
|
Current Rating(额定电流:mA/A)
|
Voltage Rating(额定电压:VAC)
|
Interrupting Rating(断续额定:A)
|
应用等级(工业级/商业级/汽车级/军工级/航空航天级)
|
形状材质
|
等级认证标准
|
快慢断
|
有无带脚
|
工作温度范围(最低:℃)
|
工作温度范围(最高:℃)
|
尺寸(mm)
|
018.025020008
|
保险丝
|
250mA
|
250VAC
|
50A
|
工业级
|
玻璃管
|
IEC60127
|
慢断
|
带脚
|
-40℃
|
125℃
|
3.6*10mm
|
选型表 - 旭程 立即选型
旭程(XC)温控器选型指南
目录- 公司介绍 Company Profile 温控器 Thermostat 保险丝 Fuses 企业资质与专利 Qualification and Patents Certifications
型号- C0015302Z,9K7.SK-B5,KSD305系列,9K7.SK-B3,CG-B,CG-A,SK-B1系列,9K7CG-XXX,SK-B5系列,KSD301系列,KSD307B,SK-A1,KSD307 SERIES,SK-A4,C0015301Z,9K7.SK-C2,SK-C2系列,C0025302Z,C4000302Z,KT SERIES,9K7.JW-A072,C2000302Z,CG-B系列,C0080303Z,9K7.SK-B11,JW-C系列,KSD305B,JW,KSD305-XXXX/XXXX,SK-C2,9K7SK-XXXX/XXXXX,C4000301Z,C5000301Z,SK,CG SERIES,9K4307-XXXX/XXXX,C0020302Z,CG,KT,KSD9700 SERIES,SK-B1,C5000302Z,C1000302Z,C0050303Z,SK-B5,C0035302Z,C0020303Z,C0040302Z,KSD307系列,KSD301-XXX/XXXXXX/XXX,9K7KT-XXXX/XXXXX,9K7.SK-F3,SK-F5系列,JW-B系列,C0060303Z,KSD9700,C0030301Z,KT系列,C7500301Z,C0070303Z,C0040303Z,SK-A1系列,9K9.9700-XXXXXXX,KSD305,KSD307,KT-A2,KT-A1,KSD301,C0030302Z,JW SERIES,JW系列,C0020301Z,C7500302Z,C0010302Z,9K4.307B,JW-A系列,CG-A1,C0025301Z,CG系列,KSD9700系列,C3000301Z,C2000301Z,C0030303Z,KT-A系列,SK SERIES,JW-B,JW-C,SK系列,KSD301 SERIES,KSD305 SERIES,CG-B2,C0010301Z,SK-F5,C3000302Z,SK-F6,9K7JW-XXXX,CG-A系列,KSD307-XXXX/XXXX,KT-A,9K4.307
旭程(XC)保险丝选型指南
目录- Company Profile Fuse User's Manual Fuse Auto Fuse Fuse Holder Thermostat
型号- 06F,3S,C0015302Z,C0040302Z,3T,10C,06T,C0060303Z,4F,KSD9700,C0030301Z,6CH,C7500301Z,4T,C0015301Z,C0070303Z,4TE,C0040303Z,8TE,C0025302Z,5C,KSD305,5F,5G,C4000302Z,5H,9L,KSD301,C2000302Z,C0030302Z,10FV,C0020301Z,5S,C7500302Z,5T,C0010302Z,24F,12F,32F,C0080303Z,5SH,6B,6C,C0025301Z,6F,6G,24T,6H,12T,C3000301Z,C4000301Z,C5000301Z,2F,C2000301Z,C0030303Z,32T,R3-13,5GH,R3-12,R3-11,5CH,6S,C0020302Z,6T,2T,5TE,XC-1,BS1362,C0010301Z,C3000302Z,5TR,3F,3G,C5000302Z,C1000302Z,XC-2,C0050303Z,C0035302Z,C0020303Z
What is the Reason Why the Fuse Keeps Burning Out?
Using a fuse that is too small can easily burn out and cause power outages, while using one that is too large may cause damage to electrical equipment. So for safety reasons, to ensure the “safety“ of the fuse, the following points should be noted.
设计经验 发布时间 : 2024-08-13
【电气】旭程推出17C系列工业保护熔断器,迈出工业领域产品系列开发和转型升级的关键一步
旭程17C系列熔断器主要为带端脚产品,适用于端子插件,其本体尺寸47±1.5mm,带端脚尺寸76.6±2mm,产品符合ROHS、REACH、无卤等环保要求。推荐料号:061.2400G0001、061.2630G0001、061.3100G0001。
产品 发布时间 : 2023-10-13
【技术】一文介绍电阻式保险丝快熔断与慢熔断的区别
在上一期文章当中我们向大家介绍了旭程2F系列电阻式快熔断保险丝,而除此之外,旭程同样推出了2T系列电阻式慢熔断保险丝,其本体的尺寸为2.7*7.3mm、额定电压125V/250V,额定电流250mA-10A,工作温度-40℃~125℃。
技术探讨 发布时间 : 2023-08-01
熔断器两端的材料都有什么?
熔断器两端的材料都有什么?本文中旭程来给大家介绍一二,希望对各位工程师有所帮助。熔断器两端的材料主要包括铜和铜合金,这是因为铜及其合金具有一系列适合熔断器应用的特性。
技术探讨 发布时间 : 2024-05-29
【产品】双刀双掷温控开关KSD302系列耐久性可达10000次,常开型温度上升、触点接通
旭程推出的KSD302系列产品是利用国外优质双金属片作为感应温度元件,当温度升到标准动作温度时,双金属片受热产生内应力而突跳。通过两组双金属片推动两组触点,达到控制两组电号或正负级的断开与接通,是一种双刀双掷的温控开关。
新产品 发布时间 : 2021-10-26
【元件】旭程10C系列电力保险丝满足50KA/1000V分断能力标准,有效保护工业设备
旭程10C电力保险丝主要分为带端子和平头两种系列,适用于插件和卡座安装,其中平头产品本体尺寸为38±0.6mm,带端子产品尺寸为40±1mm。主要由外帽、内帽、管体、可熔体和消弧剂组成,其中外帽为黄铜镀银,内帽黄铜镀镍,管体为陶瓷管,可熔体为金属丝或金属片,消弧剂为石英砂。
产品 发布时间 : 2023-10-13
旭程受邀参加2024年新能源系统熔断器技术培训交流会
2024年3月27日至29日,新能源系统熔断器技术培训交流会于中国重庆召开,旭程系列低压熔断器,具有低I2T、高分断能力等特性,最大分断能力可达100KA at 1250VAC;50KA at 1000VDC,适用于变频器、整流器、逆变器、各类电源等半导体设备以及动力电池、电动机、电容器、导线、光伏等设备和器件的短路和后备保护。亦适用于轨道交通、机动车等、纯电动汽车和混合动力汽车的短路保护。
原厂动态 发布时间 : 2024-04-15
电子商城
服务
可定制LAMP LED、 CHIP LED、 PLCC LED、 汽车用车规级LED、COB LED的尺寸/电压/电流等参数,电压1.5-37V,电流5-150mA,波长470-940nm。
最小起订量: 30000 提交需求>
可定制单色光灯珠、双色灯珠、全彩灯珠、发光二极管、贴片灯珠、贴片LED等产品,尺寸:0.6*0.3mm-3.2*2.7mm,波长:405-940nm,亮度:24-750mcd,电压:1.5-3.5V。
最小起订量: 3000 提交需求>
登录 | 立即注册
提交评论