Application of Overcurrent Protection for Self Recovery Fuses

时间： 2024-01-14 来源：XC News

技术问答

选型帮助

研发客服

商务客服

Self Recovery Fuses,self restoring fuses,self-healing fuses,旭程

The overcurrent protection application of Self Recovery Fuses - There are two optional types of self recovery fuse materials: radial lead packaging and surface mount. The function of self restoring fuses is suitable for various design applications.

In daily life, there are many plug and play models of device products, and "plug-and-play" applications include motherboards and many peripheral devices that can be frequently connected or disconnected from computer ports. For example, devices connected to mice, keyboards, audio, networks, monitors, and USB ports may malfunction, the connecting cables may be damaged, or incorrect connections may occur.

The application of self restoring fuses for overcurrent protection - therefore, the ability to reset after correcting incorrect connections is particularly attractive. Some of these applications use radial lead devices, while others are more suitable for surface mount devices.

When a power supply device experiences excessive voltage due to a malfunction, leading to overcurrent, a self recovery fuse can protect the hard drive from damage. Hard drive applications typically use surface mount self recovery fuses.

Overcurrent protection application of self restoring fuses - power equipment is susceptible to damage from circuit faults. If protective measures are not taken, the current provided by the power supply device may cause low resistance faults. When there are multiple loads or circuits, independent self-healing fuses can be used to protect each load. This device is usually placed in the output circuit and can be packaged in radial lead type or surface mount type.

The application of self recovery fuse overcurrent protection - The high temperature generated by motor overcurrent can cause damage to the winding insulation, and for small motors, it can even cause the failure of winding wires with very small diameters. The self recovery fuse usually does not trip under normal starting current. Motors generally use radial lead type self recovery fuses to provide protection.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:Application of Overcurrent Protection for Self Recovery Fuses.air conditioner fuse replacement，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Professional Knowledge of Self-healing Fuses

The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.

技术探讨发布时间 : 2023-11-30

Explanation of Parameters in the PPTC Specification for Self Healing Fuses

This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.

技术探讨发布时间 : 2024-08-21

Principle and Characteristics of Self Recovering Fuses

As a new type of overcurrent protection component, self recovering fuses have the advantages of self recovery, fast response speed, and small size, and have broad application prospects in electronic devices and circuits.

技术探讨发布时间 : 2024-09-30

Self Recovery Performance and Working Process of Self Recovery Fuses

Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.

技术探讨发布时间 : 2023-12-15

SMD fuse and Chip Fuse Specifications

SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

技术探讨发布时间 : 2023-12-04

Self Healing Fuses, a New Type of Overcurrent Protection Component

Self recovery fuse is a new type of overcurrent protection component with unique performance and wide application prospects.

技术探讨发布时间 : 2024-09-28

Self Recovery Fuse Specification, Must Understand

Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.

技术探讨发布时间 : 2023-12-02

The Application of Self Recovery Fuses in RS485 Interface

As is well known, the interface of intelligent instruments was originally RS232, which can achieve point-to-point communication, but this method cannot achieve networking function. The subsequent RS485 resolved this issue. So the current RS485 interface is quite popular among intelligent instruments. Today, the editor will explain the application of self recovery fuses in the RS485 interface.

应用方案发布时间 : 2024-01-31

Description of Metal Materials for Self Recovering Fuses

PPTC self-healing fuses play a role in limiting current and achieving circuit protection. There are various specifications and models of self-healing fuses. This article introduces the metal materials used for Self Recovering Fuses.

技术探讨发布时间 : 2024-09-10

Selection Guide of Self Recovery Fuse

Self recovery fuses are widely used for overcurrent protection of power lines, communication lines, and I/O ports in electronic products such as communication, security, industrial, automotive, and consumer products. So, in actual circuit protection, how should we choose the appropriate model of self recovery fuse to achieve the best protection effect?

设计经验发布时间 : 2023-12-21

The Selection of Miniature Fuses

Miniature fuses are primarily used in digital cameras, laptops, mobile phones, and other electronic products. From traditional glass tube fuses to miniature fuses, the selection focus varies slightly due to differences in product technology. The selection of miniature fuses involves the following elements.

设计经验发布时间 : 2024-01-04

Experience in Selecting Self Recovering Fuses

Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.

设计经验发布时间 : 2024-08-16

Guidelines for Selecting Self Restoring Fuses and Disposable Fuses

How to choose between traditional disposable fuses and self restoring fuses, as there are significant differences between these two components? Next, we will provide a detailed introduction to the advantages of these two types of fuses, making it easier for everyone to better understand these two products and choose the fuse they need.

设计经验发布时间 : 2023-12-19

How to Select the Type of Self Recovery Fuse for Procurement?

The selection of self restoring fuses has always been a classic topic in the electronics industry. On the way to PTC selection, there is always a model that belongs to you, accompanied by the “Six Steps“ of ensuring power supply.

设计经验发布时间 : 2023-12-20

Briefly describe the application field and protective effect of self recovery fuses in automobiles

With the continuous development of China‘s economy, cars have become an essential means of transportation for people‘s travel. With the increasing number of urban cars, the application of the fuse industry in the automotive field is also becoming more and more widespread. Currently, 40% of cars use various electronic devices. So where do we need to provide over temperature/over voltage/over current protection, and what devices should be used for correct protection? This issue requires us to have a deeper understanding.

技术探讨发布时间 : 2024-02-11