Determine if the Fuse is Burning (Fuse)？

时间： 2023-12-27 来源：XC News

技术问答

选型帮助

研发客服

商务客服

If the fuse can be removed from the circuit, it can be a visual fuse to determine whether it has burned out; The simplest method to determine whether a fuse is a continuity test is to blow other materials. Quickly test with a multimeter to determine if it is working properly, by hearing a beep and touching the wires together, or seeing a 0 ohm reading. After confirming that the circuit power is turned off, place the leads at both ends of the fuse. If you hear the same beep and the resistance reading of the multimeter is very low, then the fuse will not blow. If you don't hear the beep and the meter reading is OL, the fuse will blow. Take reasonable preventive measures to stay away from dangerous voltages. Supply the power circuit and switch to the multimeter voltage measurement mode. Ensure that DC circuits are selected for DC and AC circuits are selected for AC Connect the multimeter leads on both sides of the fuse. If the indicated voltage is small or even not, the fuse is intact. However, if a voltage difference (usually full supply voltage amplitude) exists, the fuse is blown.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:Determine if the fuse is burning (fuse)?volvo truck blower motor fuse location，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Calculation Method for Melt Current of Fuse Fuses

The current of a fuse includes two aspects, one is the rated current of the fuse tube, and the other is the rated current of the melt, which cannot be confused.

设计经验发布时间 : 2023-11-24

The Installation Precautions for Current Fuses

The installation of current fuses is crucial for ensuring the safety and proper functioning of electrical circuits. Here are some important installation precautions to keep in mind.

设计经验发布时间 : 2024-11-04

Solution to Fuse Failure

XC shares about Solution to Fuse Failure.

设计经验发布时间 : 2023-12-29

旭程（XC）保险丝选型指南

目录- Company Profile Fuse User's Manual Fuse Auto Fuse Fuse Holder Thermostat

型号- 06F,3S,C0015302Z,C0040302Z,3T,10C,06T,C0060303Z,4F,KSD9700,C0030301Z,6CH,C7500301Z,4T,C0015301Z,C0070303Z,4TE,C0040303Z,8TE,C0025302Z,5C,KSD305,5F,5G,C4000302Z,5H,9L,KSD301,C2000302Z,C0030302Z,10FV,C0020301Z,5S,C7500302Z,5T,C0010302Z,24F,12F,32F,C0080303Z,5SH,6B,6C,C0025301Z,6F,6G,24T,6H,12T,C3000301Z,C4000301Z,C5000301Z,2F,C2000301Z,C0030303Z,32T,R3-13,5GH,R3-12,R3-11,5CH,6S,C0020302Z,6T,2T,5TE,XC-1,BS1362,C0010301Z,C3000302Z,5TR,3F,3G,C5000302Z,C1000302Z,XC-2,C0050303Z,C0035302Z,C0020303Z

选型指南 - 旭程 - Ver.1.0 - 2022/2/16 PDF 英文下载

The Impact of Fuse Aging on Usage

After the fuse ages, there is no danger of generating the current that should be cut off and the fuse not blowing. The aging of a fuse is equivalent to a decrease in the rated value (current) rather than an increase, resulting in the circuit being cut off at a small overload current or pulse.

技术探讨发布时间 : 2023-12-16

Encapsulation Forms of Current Fuses

The encapsulation of current fuses is an important aspect that affects their performance, durability, and safety.

技术探讨发布时间 : 2024-11-13

Professional Knowledge of Self-healing Fuses

The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.

技术探讨发布时间 : 2023-11-30

Several Factors Influence the Lifetime of Current Fuses

The lifetime of a current fuse is influenced by several factors. Firstly, the current rating of the fuse plays a crucial role. If a fuse is constantly operating near or at its rated current, it will experience more heat buildup and stress over time, which can shorten its lifetime.

技术探讨发布时间 : 2024-11-06

SMD fuse and Chip Fuse Specifications

SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

技术探讨发布时间 : 2023-12-04

Self Recovery Performance and Working Process of Self Recovery Fuses

Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.

技术探讨发布时间 : 2023-12-15

5TE 系列 12A/300方型塑胶保险丝（环保产品）产品承认书（5TE SERIES 12A/300V 5TE SUB-MINIATURE FUSE-LINK(GREEN PRODUCT) SPECIFICATION FOR APPROVAL）

型号- 5TE,5TE SERIES,5TE 系列,011.212060001

数据手册 - 旭程 - 版本1.0（REV.1.0） - 23.9.7 PDF 中英文下载

Principle of Resettable Current Fuses

Resettable current fuses offer a unique solution for protecting electrical circuits while providing the convenience of being reusable. Here‘s how they work.

技术探讨发布时间 : 2024-10-31

Selection of Fuse Type

Select the type of fuse based on the electrical load characteristics in the circuit (slow melting or fast melting fuse). Fuses can be divided into slow fuse and fast fuse according to their different fusing characteristics. Fast melting fuses are commonly used in resistive circuits to protect components that are particularly sensitive to current fluctuations； Slow melting fuses are commonly used to quickly disconnect circuits when there is a fault with a large surge current when the circuit status changes.

设计经验发布时间 : 2024-01-09

Precautions for Using Fuses

The fuse is connected in series with the circuit, installed vertically, and installed on each phase line； Fuses are not allowed to be installed on the neutral line of a two phase three wire or three-phase four wire circuit.The power input terminal of the spiral fuse should be connected to the center point of the base, and the output wire should be connected to the threaded shell； This insurance is used in places with vibrations.

技术探讨发布时间 : 2023-11-26

High-Speed Fusing Chip Fuses Play A Crucial Role in Protecting Electronic Circuits

High-speed fusing chip fuses play a crucial role in protecting electronic circuits. These fuses are designed to quickly interrupt the flow of current in the event of an overcurrent or short circuit, preventing damage to sensitive electronic components.

技术探讨发布时间 : 2024-10-23