The Advantages of Self Restoring Fuses

时间： 2023-12-28 来源：XC News

技术问答

选型帮助

研发客服

商务客服

The Advantages of self restoring fuses：

Easy to install:

The self resetting overcurrent protector has no polarity and can be connected in series to the circuit that needs protection. It is not only widely used but also safe and reliable.

Reuse:

After cutting off the power and troubleshooting, it automatically returns to a normal state without the need for manual replacement and can be reused.

Improving quality:

It can improve the quality of customer products, greatly reduce the natural damage rate of finished products, and greatly extend the service life of products.

No reconnection:

Under fault conditions, the faulty circuit will not be reconnected (other protective circuits, bimetallic plates, etc. will be repeatedly reconnected to expand the fault range).

Add highlights:

The addition of high-tech elements can add new shining points to customer products, making vulnerable circuits no longer fragile.

Reduce costs:

Reduce the number of components, PCB area, and damage during operation compared to other protective circuits. Reduce defect rate and after-sales service costs.

Enhance reputation:

Can enhance the reputation of customer companies and the market competitiveness of products.

Efficiency improvement:

Can improve the design efficiency of engineers and the accuracy and reliability of protection.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:plastic fuse box under stairs.Precautions for the application of self restoring fuses，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Parameters of Self Restoring Fuses

Rated voltage refers to the high voltage that can be withstood after the self recovery fuse is disconnected. The voltage borne by both ends of a self restoring fuse during the connection period is far less than its rated voltage. When selecting a self restoring fuse, it is generally required that its rated voltage be greater than the effective circuit voltage.

技术探讨发布时间 : 2023-11-28

Briefly describe the application field and protective effect of self recovery fuses in automobiles

With the continuous development of China‘s economy, cars have become an essential means of transportation for people‘s travel. With the increasing number of urban cars, the application of the fuse industry in the automotive field is also becoming more and more widespread. Currently, 40% of cars use various electronic devices. So where do we need to provide over temperature/over voltage/over current protection, and what devices should be used for correct protection? This issue requires us to have a deeper understanding.

技术探讨发布时间 : 2024-02-11

Self Recovery Fuse for Overheat Protection in Circuits

Self restoring fuses can respond to temperature increases caused by external heat and internal current, and establish thermal connections with high-voltage equipment to provide overheating protection. Establishing this thermal connection can be achieved by arranging these devices in contact with or near high-voltage equipment.

技术探讨发布时间 : 2024-02-09

Selection Guide of Self Recovery Fuse

Self recovery fuses are widely used for overcurrent protection of power lines, communication lines, and I/O ports in electronic products such as communication, security, industrial, automotive, and consumer products. So, in actual circuit protection, how should we choose the appropriate model of self recovery fuse to achieve the best protection effect?

设计经验发布时间 : 2023-12-21

How to Select the Type of Self Recovery Fuse for Procurement?

The selection of self restoring fuses has always been a classic topic in the electronics industry. On the way to PTC selection, there is always a model that belongs to you, accompanied by the “Six Steps“ of ensuring power supply.

设计经验发布时间 : 2023-12-20

Self Restoring Fuses for Overcurrent Protection of Explosion-proof Lamps

Explosion proof lamps should use self restoring fuses as over temperature and current protectors, which not only achieve the purpose of self resetting over current protectors, but also have low cost, maintenance free, and long service life.

设计经验发布时间 : 2024-01-08

Guidelines for Selecting Self Restoring Fuses and Disposable Fuses

How to choose between traditional disposable fuses and self restoring fuses, as there are significant differences between these two components? Next, we will provide a detailed introduction to the advantages of these two types of fuses, making it easier for everyone to better understand these two products and choose the fuse they need.

设计经验发布时间 : 2023-12-19

Typical Applications of Self Recovery Fuses

Due to its advantages such as long lifespan, sensitive response, small size, and simple installation, PTC is commonly used for overcurrent protection in circuits. So, in practice, what are the typical applications of self recovery fuses? In circuits with precision instruments, there must be fuses to ensure their safety. So, what are the specific applications of PTC in circuits?

技术探讨发布时间 : 2024-01-17

Application Scenarios for Self Restoring Fuses

RS485, as one of the most commonly used serial differential communication methods in the industry, adopts a balanced transmission and differential reception method, which has the ability to suppress common mode interference. Due to its long communication distance (over 1200m), high transmission rate , high signal-to-noise ratio, convenient control, low cost, and the ability to achieve multiple nodes on a single bus, as well as the variety of transceivers that can be used, RS485 has the advantages of being able to suppress common mode interference, It has been increasingly recognized by users.

技术探讨发布时间 : 2023-12-02

Usage and Precautions for Self Restoring Fuses

Among the technical indicators of PPTC, one is Vmaxi, which represents the maximum voltage that the self recovery fuse protector can withstand in a blocked state. That is to say, in a circuit where the self recovery fuse is connected in series, when the current of the circuit is abnormal, the self recovery fuse will jump from low resistance to high resistance within a certain time range, thereby preventing the flow of abnormal large current and protecting the subsequent circuit from being damaged by large current.

设计经验发布时间 : 2023-12-24

Application of Overcurrent Protection for Self Recovery Fuses

The overcurrent protection application of self recovery fuses - There are two optional types of self recovery fuse materials: radial lead packaging and surface mount. The function of self restoring fuses is suitable for various design applications.

技术探讨发布时间 : 2024-01-14

How Self Restoring Fuses Limit the Magnitude of the Current?

Both traditional disposable fuses and self restoring fuses can achieve overcurrent circuit protection. Both achieve protection by reacting to the heating phenomenon generated by excessive current in the circuit. Fuses break the current by blowing, while self restoring fuses rely on changing from a low resistance state to a high resistance state to limit the magnitude of the current.

设计经验发布时间 : 2023-12-06

The Principle of One-time Fuse Protection is Introduced

When an overload occurs, a disposable fuse will blow at once. Although it can provide overcurrent protection, it needs to be replaced. The core part of a conventional fuse is a section of wire, which is heated to the melting point when the current is too high. After the wire melts, the current in the circuit drops to zero. So in some circuits that require complete power outage, or products with higher risk factors such as machinery, it is more suitable to use disposable fuses, which has a higher safety factor when used.

技术探讨发布时间 : 2023-11-24

Chip Fuse Products Classified by Performance

According to industry experts, SMD fuses are a relatively high skill level new variety in the small fuse profession. Chip fuses can be divided into chip current fuses and chip self recovery fuses. After one-time fuse maintenance, it needs to be replaced. After self restoring fuse maintenance, it can be self restored and reused after a power outage.

设计经验发布时间 : 2024-01-07

The Difference between Self Recovery Fuse and Blown Fuse

What is the difference between a self restoring fuse and a blown fuse? It is inevitable to have a clear understanding of the functions, parameters, and differences between them. So, let‘s experience the charm of self recovery fuses and blown fuses.

技术探讨发布时间 : 2023-11-15