Transformer Characteristic Parameters

时间： 2024-01-10 来源：PH News

代理服务

技术支持

批量订货

In this article PH will introduce the characteristic parameters of Transformer.

Working Frequency

The loss of transformer core is closely related to frequency, so it should be designed and used based on the frequency of use, which is called the working frequency.

Rated Power

Under the specified frequency and voltage, the transformer can operate for a long time without exceeding the output power of the specified temperature rise.

Rated Voltage

The voltage allowed to be applied on the coil of a transformer during operation shall not exceed the specified value.

Voltage Ratio

Refers to the ratio of the primary voltage to the secondary voltage of a transformer, which differs between the no-load voltage ratio and the load voltage ratio.

No-load Current

When the secondary circuit of the transformer is open, there is still a certain amount of current in the primary, which is called no-load current. The no-load current consists of magnetizing current (generating magnetic flux) and iron loss current (caused by core loss). For a 50Hz power transformer, the no-load current is basically equal to the magnetization current.

No-load Loss

Refers to the power loss measured in the primary when the secondary circuit of the transformer is open. The main loss is the iron core loss, followed by the loss (copper loss) caused by the no-load current on the copper resistance of the primary coil, which is very small.

Efficiency

The percentage of the ratio of secondary power P2 to primary power P1. Usually, the higher the rated power of a transformer, the higher its efficiency.

Insulation Resistance

Indicates the insulation performance between the coils of a transformer and between the coils and the iron core. The level of insulation resistance is related to the performance, temperature, and humidity of the insulation materials used.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由上山打老虎转载自PH News，原文标题为:Transformer characteristic parameters，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Working Principle of Transformer

It can transform AC voltage, current, and impedance. A simple iron core transformer is composed of an iron core made of soft magnetic material and two coils with unequal turns sheathed on the iron core, as shown in the figure. In this article PH will introduce the working principle of transformer.

2024-01-12 - 技术探讨代理服务技术支持批量订货

What is A Transformer

This article mainly introduces what is transformer, transformer product application and classification and working principle.

2024-07-28 - 技术探讨代理服务技术支持批量订货

Exchange Voltage Conversion Techniques “Authentic“ Electronic Transformers

The exchange voltage conversion technique contained in power supply and power electronics techniques is a “genuine“ electronic transformer that can also convert low voltage into low voltage for boost conversion.

2024-01-14 - 技术探讨代理服务技术支持批量订货

公司简介 (Company Profile)

2023.05 - PH - 商品及供应商介绍代理服务技术支持批量订货

Nearly 90% of Electronic Transformer and Inductor Enterprises will Transform into Automated Production

This paper analyzes the information that nearly 90% of electronic transformer and inductor enterprises will realize automated production for PH technology, and analyzes the reasons

2024-07-29 - 行业资讯代理服务技术支持批量订货

Overview of the Electronic Transformer Industry

Electronic transformers, along with semiconductor switching devices, semiconductor rectifier devices, and capacitors, are known as the four main components in power supply devices. According to its role in the power supply device, electronic transformers can be divided into.

2024-01-20 - 技术探讨代理服务技术支持批量订货

金航标胶壳选型表

金航标提供压线端子胶壳/SPH双排胶壳/PA胶壳/HA胶壳/XHD双排胶壳/XA双排胶壳/XA单排胶壳/VH胶壳/PHB双排胶壳/PH胶壳/XH胶壳/XHB胶壳/无缺胶壳选型：间距(mm)：1.25-3.96mm，PIN：2-20P，额定电流(A)：2-7A，额定电压(V)：100-250V。

产品型号	品类	间距(mm)	PIN	额定电流(A)	额定电压(V)	接触电阻(mΩ)	绝缘电阻(mΩ)	温度范围(℃)	耐受电压(V)	材料
KH-A1250H-16P-JK	无缺胶壳	1.25mm	16P	2A AC，DC	125V AC，DC	最大20mΩ	100MΩMin	-25℃～+85℃	250V AC/分钟	尼龙66，UL94V-0