Self Recovery Fuse on Mobile Power PCB Board

时间： 2024-02-08 来源：XC News

技术问答

选型帮助

研发客服

商务客服

The mobile power supply consists of overcurrent protection devices, batteries, and control charging and discharging circuits. The previous charging and discharging circuits used ICs for overcurrent protection, which were complex, had high failure rates, and high costs. Some users returned or repaired the circuit, and the manufacturer was fined and claimed compensation, which caused great trouble for manufacturers and designers. The above problems must be solved to promote their application. The manufacturer has designed many solutions for overcurrent protection, using Self recovery fuses, with fewer components, low failure rates, good functionality, and fast overcurrent response The simplest and lowest cost solution for overcurrent protection of mobile power supplies solves the above problems.

The use of self-healing fuses for overcurrent protection in mobile power sources has become the first choice for engineers. Previously, chips were used to control overcurrent for protection, which was costly and had many peripheral components, making it prone to malfunctions. A self-healing fuse can solve the overcurrent protection function with a single device and is responsive. As soon as overcurrent occurs, it is immediately in a protective state, effectively protecting the charged device, battery, and other critical circuits of the mobile power supply itself. Moreover, it can recover on its own, and this excellent performance has been increasingly recognized by engineers. On line, it is sufficient to meet the overcurrent protection function, and layout and wiring are quite simple, reducing production costs.

Originally, only one self-healing fuse element was needed to solve the aging problem. The self-healing fuse can be connected in series to the battery output power supply line. As long as there is an excessive current during internal or external charging and discharging, the self-healing fuse can be timely protected, and the battery and peripheral equipment will not burn out. self restoring fuse, also known as self resetting overcurrent protector, also known as ten thousand times fuse, also known as recoverable overcurrent protector, or polymer self restoring fuse. During normal operation, the resistance value is very low and does not affect the operation of the circuit. When the motor is overloaded or rotated, a large current is generated, causing the self restoring fuse to change from low resistance to high resistance, limiting the current of the motor and achieving the purpose of protecting the motor and system. After a power outage, the self recovery fuse returns to low resistance, and the air pump returns to a normal state. Whether using a plug-in self recovery fuse or a patch based self recovery fuse, timely protection can be achieved.

Fig.1

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自XC News，原文标题为:Self recovery fuse on mobile power PCB board，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Professional Knowledge of Self-healing Fuses

The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.

技术探讨发布时间 : 2023-11-30

Explanation of Parameters in the PPTC Specification for Self Healing Fuses

This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.

技术探讨发布时间 : 2024-08-21

Principle and Characteristics of Self Recovering Fuses

As a new type of overcurrent protection component, self recovering fuses have the advantages of self recovery, fast response speed, and small size, and have broad application prospects in electronic devices and circuits.

技术探讨发布时间 : 2024-09-30

Self Recovery Performance and Working Process of Self Recovery Fuses

Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.

技术探讨发布时间 : 2023-12-15

SMD fuse and Chip Fuse Specifications

SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

技术探讨发布时间 : 2023-12-04

Self Healing Fuses, a New Type of Overcurrent Protection Component

Self recovery fuse is a new type of overcurrent protection component with unique performance and wide application prospects.

技术探讨发布时间 : 2024-09-28

What is A Self Recovery Fuse

Self recovery fuse is an overcurrent electronic protection component that uses a polymer organic polymer under high pressure, high temperature, and sulfurization reaction conditions.After mixing with conductive particle materials, it is processed through a special process. Habitually applying PPTC (Polymer Positive Temperature).

设计经验发布时间 : 2023-12-05

Self Recovery Fuse Specification, Must Understand

Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.

技术探讨发布时间 : 2023-12-02

Description of Metal Materials for Self Recovering Fuses

PPTC self-healing fuses play a role in limiting current and achieving circuit protection. There are various specifications and models of self-healing fuses. This article introduces the metal materials used for Self Recovering Fuses.

技术探讨发布时间 : 2024-09-10

Solution to Fuse Failure

XC shares about Solution to Fuse Failure.

设计经验发布时间 : 2023-12-29

Selection Guide of Self Recovery Fuse

Self recovery fuses are widely used for overcurrent protection of power lines, communication lines, and I/O ports in electronic products such as communication, security, industrial, automotive, and consumer products. So, in actual circuit protection, how should we choose the appropriate model of self recovery fuse to achieve the best protection effect?

设计经验发布时间 : 2023-12-21

Experience in Selecting Self Recovering Fuses

Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.

设计经验发布时间 : 2024-08-16

The Application of Self Recovery Fuses in RS485 Interface

As is well known, the interface of intelligent instruments was originally RS232, which can achieve point-to-point communication, but this method cannot achieve networking function. The subsequent RS485 resolved this issue. So the current RS485 interface is quite popular among intelligent instruments. Today, the editor will explain the application of self recovery fuses in the RS485 interface.

应用方案发布时间 : 2024-01-31

The Selection of Miniature Fuses

Miniature fuses are primarily used in digital cameras, laptops, mobile phones, and other electronic products. From traditional glass tube fuses to miniature fuses, the selection focus varies slightly due to differences in product technology. The selection of miniature fuses involves the following elements.

设计经验发布时间 : 2024-01-04

Briefly describe the application field and protective effect of self recovery fuses in automobiles

With the continuous development of China‘s economy, cars have become an essential means of transportation for people‘s travel. With the increasing number of urban cars, the application of the fuse industry in the automotive field is also becoming more and more widespread. Currently, 40% of cars use various electronic devices. So where do we need to provide over temperature/over voltage/over current protection, and what devices should be used for correct protection? This issue requires us to have a deeper understanding.

技术探讨发布时间 : 2024-02-11