Design Concepts for EMI/EMP Filter Connector

时间： 2024-04-03 来源：Smiths Interconnect Blogs

技术问答

选型帮助

研发客服

商务客服

The heart of an EMI/RFI filter connector is the monolithic planar capacitor array. This is a barium-titanate ceramic disc, which provides a common substrate for capacitance on each line of a connector. The capacitance values can be mixed including ground and feed-thru lines. The typical range of capacitance available is 500 pF to 100,000 pF. The capacitor array also provides a continuous ground plane across the interface of the connector.

The capacitor arrays can be used in connectors to build C, L, Pi, and T filters. Ferrite beads are used to provide inductance of 0.5μH to 5μH, along with 10-100 ohms in the equivalent circuit. Because the capacitor is ceramic, it is relatively brittle in comparison to the other components of a connector (metal, rubber, and plastic). Therefore, the internal construction of the filter connector must isolate the capacitors from mechanical stress.

Smiths Interconnect uses a thin wall ground plane to house the filter elements. The ground plane is captured between halves of the connector shell to provide mechanical retention as well as electrical contact. Thermal stress from the connector shell is not transferred to the capacitor arrays due to a gap between the outside diameter of the ground plane and the inside of the shell. Stress from the contacts is eliminated through the use of a block of epoxy on either side of the capacitors.

Smiths Interconnect further isolates the capacitors with a proprietary expansion barrier between the epoxy and the capacitors. EMI/RFI and EMP protection can both be integrated into a connector with only a small increase in length over the non-filtered version. Smiths Interconnect's design approach for diode connectors is unique. Smiths Interconnect mounts the diodes around the outside of the contact arrangement on a multi-layer circuit board within the connector. The difference and feature of the design are described below:

• Standard military JANTX type diodes are used.

• The diodes are not special or sized down.

• The diodes are located outside the contact arrangement to allow for size and shape options. By doing so, the power/pulse width capability is preserved. This enables the diode manufacturer to produce the diodes in a familiar manner without special processes.

• The structure is modular in that the diodes are attached to multi-layer circuit board with the contact arrangement at its center permitting detachment. The circuit traces from the contact to the diode are kept as wide as possible and are sandwiched between ground planes. This provides a very low characteristic impedance strip line configuration, thus eliminating any "ringing" of pulse response.

• The diodes are removable, but not accessible to unauthorized personnel.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由咪猫转载自Smiths Interconnect Blogs，原文标题为:Design Concepts for EMI/EMP Connectors，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Smiths Interconnect Has Invested in A Comprehensive Range of Environmental Tests at Dundee Facility to Replicate Deep Space Environment

Smiths Interconnect, a global supplier of cutting-edge connectivity solutions, has invested in a comprehensive range of environmental tests at their Dundee facility. This offers an important capability to customers not prepared to negotiate on fundamental reliability and insist on demonstrable compliance.

设计经验发布时间 : 2023-08-01

Choosing the Right Interconnect Systems for Medical Device Designs

Given the demanding requirements of many medical applications, it’s important to consider to the many elements of connector design early in the development stage to ensure effective selections.

设计经验发布时间 : 2024-05-01

Mission Critical: Maintain your RF cables and connectors 24 APR Mission Critical: Maintain your RF cables and connectors

Like most nice things, proper upkeep and handling is standard practice, Radio Frequency (RF) cables and connectors are no exception. The RF signal which is transmitted between an (or between transmitter and antenna) can be compromised if the cables or connectors are not upheld.

设计经验发布时间 : 2023-08-02

MDCX & MDHC Connectors

型号- 017300-3010,017300-3013,017317-1008,017317-1206,017317-1208,017317-2016,017317-1003,017300-2006,017300-3018,017317-1004,017317-2018,017317-1203,017300-2008,017317-1006,017317-1204,017300-2003,017300-3014,017317-2014,017300-2004,017317-2013,017300-3016,017317-3020,017317-2010,013114-2005,013114-2003,013114-2004,013109-2004,017317-2008,017300-3008,017317-2004,017317-3016,017317-2006,017317-3018,017300-3004,017317-3013,017300-3003,017317-1110,MCHC,017317-2003,017300-3006,017317-3014,017317-3010,013214-1002,013214-1001,013114-1001,013114-1002,013214-1003,013114-1003,017300-2020,017317-1106,017317-1108,017317-3006,017317-1103,017317-3008,017317-1104,017317-3004,017317-3003,013214-2003,013214-2005,013214-2004,MDCX,017300-2010,013209-2004,017300-3020,017300-2018,017300-2014,017317-1010,017300-2013,MDHC,017300-2016,017317-1210,017317-2020

快速参考指南 - SMITHS INTERCONNECT - Version 1.0 - 2018 PDF 英文下载

Smiths Interconnect M23圆形电源连接器&信号连接器选型指南

描述- M23 Signal and Power Connectors in favour of motor drive applications. For the installation, crimp contacts are used which guarantee high quality of the connection, reducing the installation costs at the same time.Hand-operated and fully automatic crimping tools can be used to assemble the crimp contacts. There are two different Hypertac® hyperboloid contact types available: Machined and stamped.

型号- 020.263.1020,L□□□□□□□□□□□□□□□,C/BEL/1,B295/1.0-2.0,030.225.1000,030.701.2000,021.001008.1025,020.000376.2000,B157,021.101.2000,020.332.1020,B154,030.676.2000,030.631.2000,020.000377.2000,B150,020.001011.1020,B151,021.001009.1020,030.400.2000,030.629.2000,020.331.1020,020.315.1020,020.281.1020,021.001025.1020,021.415.1020,B286/28-24,020.000378.2000,030.617.2000,B202,020.232.2000,B201,B165,021.029.1020,B038A,030.677.2000,021.001007.1025,021.147.2000,060.030.2000,030.226.1000,030.704.2000,021.001005.102,030.635.2000,021.356.1020,020.105.1020,B179,B297,060.031.2000,SERIES L,030.387.2000,B287/28-24,SERIES S,030.679.2000,020.001001.2000,B295/0.5-1,021.382.1020,021.385.1020,B056A,B286/32-28,020.090.1020,030.619.2000,030.506.2000,B341,B288/28-24,C/BEL/7,B186,C/BEL/5,B295/2.5-4,021.129.1020,B118,B116,B287/32-28,B117,B230,030.637.2000,B286/0.75-1,B287/0.75-1,B190,030.623.2000,020.123.1020,B055/A,021.001017.1020,030.625.2000,B286/24-20,021.001018.1020,020.001002.2000,020.256.1020,B245,021.384.1020,021.165.1020,030.505.2000,021.001004.1020,030.504.2000,020.000379.2000,021.311.1020,021.072.1020,021.380.1020,031.001053.1000,B378,030.479.2000,B288/32-28,B132,021.310.1020,021.001006.1025,B252,021415.1020,B037A,B091,021.402.1020,B287/24-20,030.678.2000,B295/0.5-1.0,060.032.2000,060.029.2000,B305,B288/0.75-1,B306,S/DEM/6/0060,020.353.1020,030.691.2000,B288/24-20,030.627.2000,S/MONT/1/0060,030.697.2000,020.001003.2000,020.060.1020,030.621.2000,S□□□□□□□□□□□□□□□,021.279.1020

选型指南 - SMITHS INTERCONNECT - Version 7.0 - 2021/12/3 PDF 英文下载

Smiths Interconnect Completes Product Offering for Disposable Healthcare Devices

Patient safety is a top priority for medical device makers. Their customers and the world of disposable medical devices are constantly evolving, due in large part to the risk and cost associated with reprocessing devices, compounded by growing regulations regarding the enviromental impact of disposable devices versus sterilization processes. To meet the market demand, Smiths Interconnect has developed a new disposable receptacle connector to complete its Hypergrip® Series of patented and proven high reliability circular connectors specifically designed for medical applications.

产品发布时间 : 2024-10-11

LightCONEX CONEXPlug-in module and backplane connectors for VPX systemsPlug-in module and backplane connectors for VPX systems

型号- 450-00068,VITA 66.4,450-00064,450-00042,450-00065,450-00066,LCX12P418532101,VITA 67.3C,LCR12C418530301,LCX04A418532301,VITA 67.3E,LCR12C418530101,VITA 67.3D,LCX04A418532101,415-00019,LCR12C428530101,415-00018,LCT12B418533001,LCT12B428533001,LCX12B418532101,12TRX,LCR12A418530301,LCT12C418533001,LCT12C428533001,450-00062,LCX04B428532101,LCX04B418532101,LCR12A418530101,LCX04B418532301,LCR12B418530101,LCR12B418530301,LCR12B428530101,450-00054,LC 4TRX,LCT12A418533001,LCX12C418532101,12RX,LCX04C428532101,415-00035,12TX,415-00012,415-00011,LCX04C418532301,4TRX

数据手册 - SMITHS INTERCONNECT - 16/03/2020 PDF 英文下载

Smiths Interconnect D系列快速断开圆形塑料连接器选型指南

目录- Quick disconnect circular plastic connectors

型号- T1124,T1982,T1981,T1164,D01,D00,D02,D02 SERIES,D00 SERIES,D01 SERIES,D SERIES,T1866,T1888,T2019,M22520/2-01,D00EEB-0001,T870,D02□□B905□□□□□□□U□□□,MINI D00,HX3,T1957,T1914,T1958,S/DEM5.0150,M309,AFM8,K623,K547,T1215,AF8,D01□□B□□□□□□□□□,K1775,T1271,S/DEM1.0060,T2080,TP688

选型指南 - SMITHS INTERCONNECT - Version 1.4 - 2019/6/25 PDF 英文下载

Smiths Interconnect MHD/MDD/MDP系列PCB高密度连接器选型指南

描述- Smiths Interconnect offers an extensive range of superior contact technologies suitable for standard and custom solutions. Hypertac® (HYPERboloid conTACt) is the original superior performing hyperboloid contact technology designed for use in all applications and in harsh and demanding environments where high reliability and safety are critical.

型号- MHD 00- __ Z134,KMX 3-F 101,MHD 00- __ Z133,MHD 00- __ Z111,SD- 030 00 CX 003,MHD 00- __ Z130,MHD 00- __ Z131,KMX 3-M 092,KMX 3-F 142,KMX 3-F 032,MHD,MHD 00- __ 121,MDD SERIES,MHD 00- __ Z190,MHD 00- __ Z191,MDD,KMX 3-M 112,KMX 3-M 041,KMX 3-M 131,MHD 00- __ Z124,MDP,KMX 3-F 172,MHD SERIES,020 087 1- 30R OG,020 091 1- 40R OG,KMX 3-F 112,020 085 1- 10R OG,KMX 3-M 032,MHD 00- __ Z122,KMX 3-M 081,KMX 3-F 131,MHD 00- __ 110,KMX 3-M 101,MDP SERIES,KMX 3-M 142,KMX 3-M 172,020 084 2- 10R G1,KMX 3-F 041,020 056 2- 30R G1,KMX 3-F 081,MHD 00- __ Z125,MHD 00- __ Z126,020 060 2- 40R G1,KMX 3-F 092

选型指南 - SMITHS INTERCONNECT - Version 1.4 - 2024/7/8 PDF 英文下载

Spring Probes Loose Probe & Connector Solutions

型号- 101111,305330-000,101190,101506,101628,101402-000,100410,100410-005,PI-5327,100891-002,100671,101628-000,101247-001,100671-000,100606-000,101050-003,PI-5329,101712-000,PI-5328,101119-001,101506-000,101190-002,101438-000,101111-008,101712,101679,101438,101119,101050,101294,100804-002,305327-000,305328-000,101050-005,101294-000,PI-5330,305329-000,101367,101247,101402,101602,102197,100891,100803-011,101679-000,101530-000,100803,100606,100804,101530,101367-001,101367-002

商品及供应商介绍 - SMITHS INTERCONNECT - Version 1.3 - 2023/10/25 PDF 英文下载查看更多版本

Smiths Interconnect New High-power Connectors for Demanding Defense Applications

Smiths Interconnect announced HBB five-pole connector in addition to the already existing single-pole version with a unique, quick latch mechanism. Smiths Interconnect announced HBB five-pole connector in addition to the already existing single-pole version with a unique, quick latch mechanism.

新产品发布时间 : 2022-04-07

Smiths Interconnect Introduces Mini-Lock Connectors, New Technology to Improve Connectivity in Mission Critical Applications

Smiths Interconnect today announces the introduction of a new, cutting-edge product in its range of connectors that enables faster and more reliable connectivity across a range of mission critical industry sectors and applications.

产品发布时间 : 2024-08-06

Smiths Interconnect KA系列符合MIL-DTL-55302标准的PCB连接器选型指南

目录- Hypertac® Hyperboloid Technology PCB Connector

型号- YPN006-020H,YPN006-072H,YPN006-016H,YPN006-016G,YPN006-024G,YPN006-036H,YPN006-036G,YPN006-048H,YPN006-024H,YPN006-020G,YSK006-090AH,YPN006-106H,YPN006-106G,YSK006-094AH,KA 160.4/127CEMY21TAH,YSK006-092AH,YSK006-014AH,KA □□□ □/□□□□ □ □□□ □ □□ □□□ □□□□ □□,YSK006-012AH,YPN006-172G,YPN006-075H,YPN006-172H,YSK006-029AH,YPN006-015G,YPN006-487H,YPN006-148H,YPN006-148G,YPN006-039H,YPN006-035G,YSK006-096ANH,YPN006-015H,YPN006-023H,YPN006-023G,YPN006-035H,KA 160.4/127CEMD21TAH,YSK006-006AH,KA 160 / 127 C P M C 10 TH,YPN006-050H,YPN006-171H,YPN006-470H,YPN006-171G,YPN006-470G,KA SERIES,YPN006-159H,YPN006-159G,YPN006-022G,YPN006-034H,YPN006-034G,YPN006-022H,YPN006-019G,YPN006-039G,KA 160.4/127CEFD21TAH,YPN006-019H,YSK006-030AH,KA 17 / 127 BE F C 21 TAH,YSK006-010ANH,YSK006-013AH,YSK006-074AH,YSK006-274AH,YPN006-073H,YSK006-028AH,YPN006-049H,YPN006-021H,YPN006-021G,YPN006-077H,KA 160.4/127CEFY21TAH,YSK006-009AH,YSK006-005ANH(2),YSK006-011ANH,YSK006-020AH,KA 17 / 127 BP M C 10 TH

选型指南 - SMITHS INTERCONNECT - Version 1.3 - 2022/10/25 PDF 英文下载

Smiths Interconnect SnapTac®系列圆形和矩形微型卡扣式连接器选型指南

目录- Hyperspring® Technology SnapTac® Miniature Connectors SnapTac® Miniature Connectors Applicable documents Circular Connector Rectangular Connector

型号- ST1091,C13PSC-----,C13PSC01AAZ,C19ESC-----,C13RSC-----,C07CPMET---,C19CRMET---,C07XSC-----,C07YSC-----,C07ZSC-----,23840,23841,R21RDC-----,C13YSC-----,C13XSC-----,C13ZSC-----,C07R,C19R,C13ESC-----,C07P,ST1089,C19P,C13PSC01CH01AAZ,C19CPRUBFPR,R21PSC--CH-----,R12PSC--CH-----,C07PSC--CH-----,R12RSC-----,C13PSC--CH-----,C19PSC--CH-----,R12PSC01AAZ,C13CRRUBFPR,C07CPRUBFPR,C13CRMET---,C19RDC-----,C19YSC-----,C07RDC-----,C7ZSC--CH-----,R12RLC-----,R21RSC-----,R21RLC-----,R21PSC-----,C07ESC-----,C13R,C07CRMET---,C13P,C13ZSC--CH-----,R12PSC-----,C13RDC-----,M1035,M1036,C19ZSC--CH-----,C19XSC-----,C13CPMET---,C07RSC-----,C19ESC--CH-----,C07PSC-----,R30RDC----,C19CRRUBFPR,C07ESC--CH-----,R30RLC----,SNAPTAC□□□□□□□□□□□□□□□,C19PSC-----,C19CPMET---,R12RDC-----,C19ZSC-----,C19RSC-----,C07CRRUBFPR,R12PSC01CH01AAZ,C13ESC--CH-----,C13CPRUBFPR,SNAPTAC□□□□□□□□□□□

选型指南 - SMITHS INTERCONNECT - Version 1.4 - 2018/8/2 PDF 英文下载

Smiths Interconnect Launches Press-Fit cPCI Connector Series to Enhance Efficiency, and Reduce Costs

Smiths Interconnect is thrilled to announce the release of the Press-Fit version of its renowned cPCI connector series. This innovative addition underscores Smiths Interconnect’s dedication to meeting the rigorous demands of the Defense, Space and Commercial Aerospace markets.

产品发布时间 : 2024-07-24