ROHM’s New Energy-Saving DC-DC Converter ICs Offered in the TSOT23 Package，Compact Size Reduces Component Area by 72%
ROHM has developed four new compact DC-DC step-down converter ICs suitable for consumer and industrial applications, including refrigerators, washing machines, PLCs, and inverters. ROHM is expanding the lineup which includes the BD9E203FP4-Z, a 2A buck converter with a switching frequency of 350kHz.
In recent years, increasing application functionality in consumer devices and industrial equipment has driven the demand to minimize board space, resulting in a rise in the adoption rate of compact DC-DC converter ICs.
Furthermore, as reducing standby power consumption is becoming a significant challenge, there is a growing need for DC-DC converter ICs to deliver higher efficiency during light load (low power) conditions. To meet these demands, ROHM developed products that achieve higher efficiency in an even smaller package than existing SOP-J8 (JEDEC standard: SOIC8 equivalent) products.
The new converter ICs deliver an output current of 1A to 3A in the compact TSOT23 package (2.8mm × 2.9mm). This reduces component area by up to 72% compared to the general SOP-J8 package (4.9mm × 6.0mm), contributing to the miniaturization of power supply blocks. On top, adopting a flip chip on lead frame TSOT23 package design enables high-efficiency operation by eliminating bond wire resistance.
The BD9E105FP4-Z, BD9E202FP4-Z, and BD9E304FP4-LBZ also utilize a COT control mode during light load operation. As a result, efficiency during light load operation is improved over standard products, making them ideal for applications requiring low standby power consumption.
Going forward, ROHM will continue to focus on developing products that leverage analog design technologies, contributing to greater miniaturization and energy efficiency in consumer and industrial equipment applications.
TSOT23 Package Product Lineup
☆: Under Development
Application Examples
3.3V/5V/12V/24V power supply applications
Consumer Appliances:
Refrigerators, washing machines, air conditioners, etc.
Industrial Equipment:
PLCs (Programmable Logic Controllers), inverters, AC servos, etc.
Online Sales Information
Sales Start Date: March 2024 (in succession)
Product Information
In addition to the ICs, Evaluation Boards together with various support tools are available that enable immediate evaluation during application design.
Various Support Tools
Calculation Sheet: A calculation tool for application circuits that facilitates external constant design. By setting values as described, users will be able to determine the circuit parameters that satisfy the desired characteristics.
The sheet is available for download from the ‘Tools’ section on each product page on ROHM’s website.
[BD9E105FP4-Z / BD9E304FP4-LBZ / BD9A201FP4-LBZ]
ROHM Solution Simulator：A free simulation tool that runs on ROHM’s website. Changing the external constants in the topology described in the datasheet allows the optimal solution for the frequency response (for a power supply) to be considered.
[BD9E105FP4-Z / BD9E202FP4-Z / BD9E304FP4-LBZ / BD9A201FP4-LBZ]
*Logging in to MyROHM is required to use the tool.
Other Content: SPICE models for circuit simulation along with application notes that contain useful information on thermal design, circuit design, and verification can also be downloaded from each product page.
Terminology
COT (Constant ON Time) Control Method
A feedback circuit control method for stabilizing the output voltage. When the feedback voltage drops below the reference voltage, the switching element turns ON, then automatically turns OFF after a fixed time has elapsed. This enables stable output to be efficiently obtained at light loads.
Spurious
Unnecessary electromagnetic waves that deviate from the originally required predetermined frequency.
Overshoot Prevention Function
If the output current of the power supply IC exceeds the expected value, the output is shut down by the OCP (overcurrent protection) function. When recovering from a shutdown, a momentary overshoot (excessive output voltage) occurs, causing a delay in recovery, so it is necessary to expedite recovery and suppress overshoot.
ESD (Electrostatic Discharge)
Static electricity (surge) is generated when electrically charged objects come into contact with each other. This static electricity (surge) may cause circuits and equipment to malfunction or destruction.
EMI (Electromagnetic Interference)
EMI is used as an indicator for how much noise is generated when operating the target product, which may cause problems in surrounding ICs and systems. ‘Good EMI characteristics’ mean that less noise is generated.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由玄子转载自ROHM News，原文标题为:ROHM’s New Energy-Saving DC-DC Converter ICs Offered in the TSOT23 Package，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
【IC】ROHM DC-DC转换器IC家族增加新品，有助于消费电子和工业设备电源部分的小型化
DC-DC转换器IC家族来了“新朋友”BD9E105FP4-Z / BD9E202FP4-Z / BD9E304FP4-LBZ / BD9A201FP4-LBZ，他们可以被应用在冰箱、洗衣机、PLC、逆变器等消费电子和工业设备中。
【IC】罗姆电源IC选用攻略！助力打造更高效、更可靠的电源系统
作为全球知名的半导体制造商，罗姆凭借其卓越的产品和技术，在电源管理领域扮演着举足轻重的角色。本文将为各位工程师带来罗姆在电源管理领域的技术及产品介绍。罗姆的电源管理IC包含线性调节器、开关调节器、电源管理开关IC及系统电源等多个种类。
【IC】ROHM采用小型SOT23封装的节能降压型DC-DC转换器IC，可减少电源尺寸，具有完备的设计支持资源
ROHM面向冰箱、洗衣机、PLC、逆变器等消费电子和工业设备应用，开发出4款小型DC-DC转换器IC“BD9E105FP4-Z / BD9E202FP4-Z / BD9E304FP4-LBZ / BD9A201FP4-LBZ”。
ROHM降压型DC-DC转换器IC选型表
从输入电压和输出电流的矩阵中可以轻松找到与规格要求相契合的电源解决方案。另外从快速响应控制和轻负载时效率改善模式中，能够选择符合要求的产品。
|
产品型号
|
品类
|
Grade
|
ch
|
Integrated FET / Controller
|
Topology
|
Synchronous / Nonsynchronous
|
Vin1 (Min.)[V]
|
Vin1 (Max.)[V]
|
Vout1 (Min.)[V]
|
Vout1 (Max.)[V]
|
Iout1 (Max.)[A]
|
SW frequency (Max.)[MHz]
|
Light Load mode
|
EN
|
PGOOD
|
Operating Temperature (Min.)[°C]
|
Operating Temperature (Max.)[°C]
|
Package
|
|
BD9E200FP4-Z
|
降压型DC-DC转换器IC
|
Standard
|
1
|
Integrated FET
|
Buck
|
Synchronous
|
4.5
|
26
|
0.7
|
20.8
|
2
|
0.5
|
Yes
|
Yes
|
No
|
-40
|
85
|
TSOT23-6L
|
选型表 - ROHM 立即选型
LogicoA001-EVK-001同步降压DCDC转换器评估板用户指南
描述- 本资料为LogiCoATM Power Solution同步降压DCDC转换器评估板LogiCoA001-EVK-001的用户指南。内容包括系统概述、操作条件、固件、模块图和描述、输入电压检测、输出电压检测、漏极电流检测、LED指示灯、串行通信、评估板视图、操作步骤、板级原理图、板级信息和布局、物料清单以及参考应用数据。资料详细介绍了评估板的组成、工作原理、操作方法和性能参数。
型号- LOGICOA001-EVK-001
BD9ExxxFP4-Z、BD9E304FP4-LBZ、BD9A201FP4-LBZ 采用小型SOT23封装的节能降压型DC-DC转换器IC
型号- BD9E105FP4-Z,BD9E304FP4-LBZ,BD9A201FP4-LBZ,BD9EXXXFP4-Z
E/G型全碳化硅模块评估板第二代碳化硅MOSFET用户指南
描述- 本资料为ROHM公司生产的E/G型全碳化硅模块（BSMGD2G12D24-EVK001）的评估板用户手册。手册详细介绍了评估板的功能、使用方法、安全注意事项、电气特性、电路图和物料清单。评估板适用于研发环境，用于驱动第二代碳化硅MOSFET模块，具备门极驱动、短路保护、过压保护、欠压保护和温度监控等功能。
型号- RB168VAM150TR,LTR18EZPFLR470,MCR01MZPF2202,MCR01MZPF2201,MCR01MZPF2002,NON-C1005,MCR01MZPF6801,BD71L4LG-1GTR,MCR01MZPF4700,MCR01MZPF6800,NON-C2012,MCR01MZPF4701,MCR01MZPF4702,MCR01MZPF6802,2SCR572D3TL1,BSMXXXD12P2GXXX,BSMXXXC12P2EXXX,NFM18CC223R1C3D,MCR01MZPF1000,UMK212B7105KGHT,EMZ6.8NTL,NON-C1608,NON-BSM300,MCR01MZPF1502,UMK105CH101JVHF,BSM180C12P2E202,TFZVTR30B,EMK212BBJ106KGHT,RHU003N03FRAT106,MCR01MZPF3600,UMJ316BC7475KLHTE,LTR18EZPF68R0,MCR03EZPJ000,MCR03EZPFX4702,EMK212AB7475KGHT,3408-6002LCPL,BM60054AFV-CE2,BSM400D12P2G003,BU4S11G2-TR,MCR01MZPF2701,RF071MM2STR,UMK107B7102KAHT,MCR03EZPFX1003,2SAR572D3TL1,MCR03EZPFL3R90,BSM300D12P2E001,NON-LTR18,UMK105B7104KVHF,BU4S81G2-TR,BSMXXXC12P2GXXX,BD450M2EFJ-CE2,BSMXXXD12P2EXXX,S-19110PABH-M6T1U4,MCR01MZPF5101,MCR03EZPFX3301,MCR01MZPJ000,MCR03EZPFX1000,NON-MCR10,BSMGD2G12D24-EVK001,RFN1LAM7STR,MCR01MZPF3902,MCR01MZPF1003,RB160MM-40TR,MCR01MZPF1001,BU7261SG-TR,MCR01MZPF5602,BD7F200EFJ-LBE2,TFZVTR12B,MCR10EZPF6801,LTR18EZPF2701,RB160VAM-60TR,MCR10EZPF4701,MCR01MZPF3901,MCR01MZPF1801,HFTR4CA,TFZVTR6.2B,GMK107AB7105KAHT,BSM180D12P2E002,S-19700A00A-E8T1U4,MCR01MZPF10R0,TMK107B7474KAHT,NON-MCR03,NON-MCR01
【IC】ROHM开发出采用SOT23封装的小型节能DC-DC转换器IC，安装面积减少约72%
ROHM面向冰箱、洗衣机、PLC、逆变器等消费电子和工业设备应用，开发出4款小型DC-DC转换器IC“BD9E105FP4-Z / BD9E202FP4-Z / BD9E304FP4-LBZ / BD9A201FP4-LBZ”。另外，ROHM还计划推出最大输出电流2A、开关频率350kHz的BD9E203FP4-Z，进一步扩大产品阵容。
BD9EXXXFP4-Z、BD9E304FP4-LBZ、BD9A201FP4-LBZ紧凑型SOT23封装节能降压DC-DC转换器IC
型号- BD9A400MUV,BD9E201FP4-Z,BD9A100MUV,BD9A301MUV-LB,BD9E105FP4-EVK-001,BD9E304FP4-LBZ,BD9A201FP4-LBZ,BD9E203FP4-Z,BD9E200FP4-Z,BD9A201FP4-EVK-001,BD9A101MUV-LB,BD9E202FP4-EVK-001,BD9E105FP4-Z,BD9EXXX,BD9E300UEFJ-LB,BD9E301UEFJ-LB,BD9AXXX,BD9E303UEFJ-LB,BD9E101FJ-LB,BD9A300MUV,BD9E302EFJ,BD9E104FJ,BD9A600MUV,BD9E304FP4-EVK-002,BD9E304FP4-EVK-001,BD9EXXXFP4-Z,BD9E202FP4-Z,BD9E100FJ-LB,BD9E304FP4-EVK-003
BD7F200EFJ-LB评估板隔离反激式DC/DC转换器用户指南
描述- 本资料为ROHM公司BD7F200EFJ-LB隔离反激式DC/DC转换器评估板BD7F200EFJ-EVK-002的用户手册。该评估板将24V输入电压转换为5V输出电压，最大输出电流为2A。手册详细介绍了评估板的性能规格、操作步骤、电路图、物料清单、布局和参考应用数据。此外，还提供了安全注意事项和高压安全预防措施。
型号- GRM188R71H471KA01,MCR01MZPF1203,MCR01MZPF1004,BD7F200EFJ-EVK-002,GRM32ER71H106KA12,TFZ20B,ESR10EZPF1001,CEP1311D-2405051R-10,MCR01MZPF3901,BD7F200EFJ-LB,RB160MM-40,GRM21BR71H105KA12,MCR03EZPFX3300,BD7F200EFJ,RB050LAM-30,GRM32ER71A476KE15,MCR01MZPF8062
BD70522GUL超低Iq降压转换器评估板
描述- 本资料介绍了ROHM的BD70522GUL同步降压DC/DC转换器及其评估板的使用。该转换器适用于电池供电设备，具有低静态电流和超低功耗模式，支持高达500mA的输出电流。资料详细说明了组件选择、操作步骤、性能曲线和评估板的操作流程。
型号- 5000,5001,BD70522GUL,JMK107BBJ226MA,61300311121,PMR03EZPJ000,EMK212ABJ106KD-T,MAMK2520H2R2M,MCR01MRTF1002
BD7F100EFJ-EVK-002隔离反激式DC/DC转换器BD7F100EFJ-LB评估板用户指南
描述- 本资料为ROHM公司BD7F100EFJ-LB隔离反激式DC/DC转换器评估板BD7F100EFJ-EVK-002的用户指南。该评估板可将24V输入转换为±15V输出，最大输出电流为0.165A。资料详细介绍了评估板的性能规格、操作步骤、电路图、物料清单、布局和参考应用数据。此外，还提供了安全注意事项和注意事项。
型号- GRM32DR71E106KA12,MCR01MZPF1203,BD7F100EFJ,BD7F100EFJ-EVK-002,MCR01MZPF1004,1SS400SM,ESR10EZPF1001,MCR01MZPF4701,GRM155R11H472KA01,MCR01MZPF3901,GRM31CR71H475KA12,MCR01MZPF7682,GRM21BR71H105KA12,RB160MM-90,CEP1311D-2415052R,KDZ18B,BD7F100EFJ-LB
用于工业应用的KX132-1211和KX134-1211加速度计
描述- ROHM Semiconductor推出的KX132-1211和KX134-1211加速度计适用于工业应用，具备宽工作温度范围、快速采样率、宽信号带宽和g范围等特性。这些加速度计具有先进的振动检测引擎和低功耗设计，适用于工业物联网和机器健康监测等领域。资料中详细介绍了这些加速度计的关键特性、嵌入式功能、解决方案优势以及应用实例。
型号- KX132-1211-EVK-001,RKX-EVK-001,KX134-1211,KX132,KX134,KX132-1211,KX134-1211-EVK-001
带SiC MOSFET的TPPFCSIC-EVK-301-UG 3.6 kW图腾柱PFC评估板用户指南
描述- 本资料为ROHM公司3.6 kW Totem Pole PFC with SiC MOSFETs Evaluation Board的用户指南。指南详细介绍了该评估板的硬件和固件设计，包括电路图、物料清单、布局和组装图。评估板采用Totem Pole PFC拓扑结构，主要组件包括ROHM的Gen.4 SiC MOSFETs和BM61S41单通道隔离栅极驱动IC。指南还提供了安全注意事项和操作说明。
型号- TPPFCSIC-EVK-301
电子商城
品牌：ROHM
品类：Temperature sensor evaluation board
价格：￥205.1045
现货： 5
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论