Slide Switch Introduction
Description
A slide switch has an oblong, rectangular layout consisting of a slide control, a bracket or mount, the switch mechanism and solder or screw terminals for electrical connections. The control is made of an insulator, such as plastic, to prevent electrical shock. Typical switch sizes range from about one-half-inch long to about 2 inches; the switch’s size is related to the ability of a fingertip to move the control back and forth, so very small or very large switches are typically not slide types. Slide Switches handle between a tenth of an amp to several amps of current, and up to about 200 volts, depending on the size.
Action
The switch has two modes, “on” and “off.” Inside the switch mechanism, a piece of metal slides over a pair of metal contacts. In the off mode, the metal touches only one of the contacts; in the on mode, the metal touches both. If the switch is wired to a circuit, electrical current flows only when the switch is in the on position; current flows from the circuit to one contact, through the metal, to the second contact and back to the circuit. When the switch is off, a gap between the metal and the second contact prevents current flow.
A slide switch is a basic type of electrical control; you can find them on consumer electronics, industrial equipment and scientific instruments.
Direct Control
As long as an electrical circuit’s current is within the slide switch’s current rating, the switch can control the circuit directly. The switch can control lights, electronic devices and small motors. Current from a power source flows through the switch, to the circuit and back to the power source, forming a complete electrical circuit. When you turn the switch off, it breaks the circuit and turns the connected device off.
Indirect Control
A slide switch can control a circuit even if it exceeds the switch’s rating, though in this case the control is indirect. The switch sends a small current to a relay or transistor, which in turn controls a larger current or higher voltage from a separate power source. Though this arrangement is more complicated, it adds safety and reliability to the circuit because the switch carries only a small current. Putting excessive current or voltage through a slide switch increases the sparks produced when the switchmakes or breaks contact; this wears down the electrical surfaces more rapidly and poses a greater potential shock hazard.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自KOSODSWITCH News，原文标题为:Slide Switch Introduction，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
电子商城
现货市场
品牌：SILICON LABS
品类：Switch Hall Effect Magnetic Position Sensor
价格：￥2.2924
现货：126,000
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论