Micro USB Connector Introduction
If you can’t live without your cell phone or personal digital assistant (PDA), you’ll be pleased to hear that Micro USB Connectors will soon make these gadgets even more convenient to use.
USB, which stands for Universal Serial Bus, is an externalbus, or cable, standard used to connect peripheral devices, like mobile phone, MP3 players, digital cameras and game controllers.
It's an alternative to its common predecessors, serial and parallel standards. After some time, USB technology was enhanced and reduced to a smaller size known as mini USB. The micro USB specification is now scheduled to replace mini USB connectors in many different types of portable devices, including cell phones and PDA's. Standard devices will use Micro-B receptacles, while USB OTG (On-The-Go) devices will use Micro-AB receptacles. Micro-A plugs, Micro-B plugs, and standard cables will also be available.
The micro usb technology was developed by the USB Implementers Forum, Inc. (USB-IF), an independent non-profit group that works to advance USB technology.
When compared to the mini USB, the micro USB offers many advantages. The most obvious benefit to this new technology is its smaller size. As cell phones and PDAs become thinner and lighter, consumers are frequently finding the mini USB connector is simply too large for practical use. The micro USB will allow manufacturers to push the limits of this trend towards sleeker design.
Furthermore the micro USB connector is becoming the de facto standard to charge mobile devices and its use will therefore be even more widespread than of its mini USB counterpart.
In the original USB specification there was a strict separation between the host (mostly a computer) which acts as a master device, and the peripherals which have only slave functionality. As mobile devices get smart and often run their own operating system, the separation between the two types of devices has vanished. When connected to a PC a smartphone may be acting as a slave, but it could also be connected to a photo printer directly to print pictures made with the phone. In that case the phone switches from its slave role to a master. To allow this an extension to the USB 2.0 specification has been written which is called USB On-The-Go or more often USB OTG. This supplement provides means for easy switching between the master and slave role of a device.
Because most small devices which can both act as a master and a slave only have one USB connector, additions to the connector definition were necessary to allow a role change with only one type of cable. This is where the mini USB AB and later the micro USB AB connector are defined for. The mini USB AB connector is now officially deprecated, but the micro USB AB connector is replacing its place rapidly. Countries like China are even considering making this micro USB AB connector mandatory on all new cell phones sold. In this micro USB AB connector the ID pin is used to signal the master of slave function.
The pin numbering for the micro USB connectors is the same as for the mini USB connectors. The only difference is that for the micro USB AB connector the ID pin now has a function assigned to it.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自KOSODSWITCH News,原文标题为:Micro USB Connector Introduction,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
USB CONNECTOR连接器发展
SATA与USB几年来,在争相成为外部内存接口的各种器件标准中,USB、eSATA和Firewire在个人电脑领域,都各自取得了多个瞩目的成绩。 在这一点上,串行ATA(SATA)在消费类PC的内部驱动连接性上,取代了所有其它界面。
技术探讨 发布时间 : 2024-08-16
USB Connector History
Universal Serial Bus (USB) is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices.
技术探讨 发布时间 : 2024-04-27
Definition and Classification of USB Connectors
UBS connector, namely universal serial bus connector, is the connector between the computer and peripheral devices (such as a printer, display, scanner, mouse, or keyboard). It is part of the USB interface, including the types of ports, cables, and connectors.
技术探讨 发布时间 : 2023-05-01
电子商城
服务
深圳市启威测实验室,面向所有企业提供信号完整性测试服务,主要包括USB、HDMI 、DP、MIPI、PCIe 、SD/EMMC、DDR接口信号测试。测试手段有波形测试、眼图测试、抖动测试等。
提交需求>
整体外形尺寸小至0.6*0.3*0.3mm (DFN0603),工作电压范围覆盖2.5V~36V,电容值低至0.2pF,浪涌能力最高可达240安培,静电等级可达空气放电、接触放电±30KV。提供免费浪涌测试仪、静电测试仪测试。
提交需求>
登录 | 立即注册
提交评论