Why Fast Recovery Diodes Have Higher VF
Fast recovery diodes have high VF relative to Schottky diode, so let's look at why fast recovery diodes have high VF.
Fast recovery diode withstand voltage is above 200V. 20A fast recovery diode in the same TO-263 package, the VF at 200V is below 1V, the VF at 300V is 1.1, and the VF at 400V is 1.3. From this, we can see that the higher the withstand voltage, the higher the VF, this conclusion is valid. For those of you who still have doubts, we can also discuss the comparison between fast recovery diodes and Schottky diode.
Fast recovery diode withstand voltage is above 200V. 20A fast recovery diode in the same TO-263 package, the VF at 200V is below 1V, the VF at 300V is 1.1, and the VF at 400V is 1.3. From this, we can see that the higher the withstand voltage, the higher the VF, this conclusion is valid. For those of you who still have doubts, we can also discuss the comparison between fast recovery diodes and Schottky diode.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由三年不鸣转载自LXMICRO Official Website，原文标题为:Why fast recovery diodes have higher VF，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
The Difference Between a Schottky Diode and a Fast Recovery Diode
Schottky diodes are Schottky barrier diodes, or Schottky diodes, based on the barrier formed by the contact of metals and semiconductors. In this article LX MICRO will introduce the difference between a schottky diode and a fast recovery diode.
What Is The Difference between MBR20100FCT and MBR20100CT
What is the difference between Schottky diode MBR20100CT and Schottky diode MBR20100CT?
How to Properly Apply Schottky Diode and Choose The Type
Replace the Schottky diode with the original model, because different models Schottky forward voltage drop VF and reverse breakdown voltage VR, reverse leakage current IR are different. For example, replacing MBR2045 with MBR20100, although the reverse breakdown voltage of MBR20100 is higher than that of MBR2045, does not seem to be a problem. But the forward voltage drop of MBR20100 is higher than that of MBR2045. If it is used in set-top box power circuit, it will cause + 5v and + 12V voltage deviation too much, and the power consumption will be higher than before.
Lingxun Microelectronics 10A Schottky Diode Model and Package
Lingxun microelectronics Schottky diode is mainly used in power supply, adapter, automotive electronics, consumer electronics, small household appliances and other industries to do high-frequency, low-voltage, rectifier, flyback diode, protective diode use.
Nomenclature for the Schottky Diode MBR Family
In this article LX MICRO will introduce the nomenclature for the schottky diode MBR family.
How to Simply Identify Common Schottky Diode
There are two common Schottky diodes. Some purchasing professionals know the commonalities of the Schottky diode, but some purchasing is not clear, in fact, to judge the commonalities of Schottky diode is very simple, here‘s how to identify Schottky diode commonalities.
SiC Schottky Compared to Normal Schottky Diode
The common Schottky diode, known as Silicon Schottky diode, is a metal-to-semiconductor diode such as MBR2045CT, MBR20100CT, and so on. It has the following advantages (or characteristics) :1.One of the advantages of silicon Schottky diode over PN junction devices is the low forward conduction voltage and low conduction loss.2.Another important performance Schottky diode is its low reverse recovery time (TRR) of 0.01 microseconds3.Silicon Schottky diode behave more like an ideal switch than PN junction devices.
How to Solve the Electromagnetic Interference Problem of LED Driver Power Supply with Schottky Diodes
In terms of soft switching technology, inductance and capacitance components are added to the original hard switching circuit. Switching frequency modulation technology: by modulating the switching frequency fc, the energy concentrated on fc and its harmonics 2fc, 3fc... is dispersed to the surrounding frequency bands. Schottky diodes with small reverse recovery current and short recovery time are ideal devices for high-frequency rectification in switching power supplies.
Is Schottky Diode Well Sealed with Plastic or Iron?
In addition to using full plastic packaging to ensure circuit safety, Schottky diodes also have another type of packaging, which is iron head packaging to solve heat dissipation problems. The difference between using iron head packaging and full plastic packaging. This packaging can significantly improve the effective heat dissipation efficiency of power supplies, and is very suitable for circuits with severe heat generation or high heat dissipation requirements.
Low Voltage Drop High Junction Temperature Schottky Diode HBT20L200DC from LXMICRO Adopts TO-263 Packaging
The Lingxun/LX brand HBT20L200DC low-voltage drop high junction temperature Schottky diode adopts imported chips from Taiwan, with an electrical parameter of 20A200V and two chips inside. The chip size reaches 93MIL, with a minimum operating temperature of -55 degrees Celsius and a maximum operating temperature of+175 degrees Celsius. There are 3 pins in total, with input on both sides and output on the middle pin.
A Brief Discussion on the Types and Scope of Application of Transistors
Due to the richness of people‘s lives, the daily activity time is greatly extended, and there are also various levels of activity time. It can be said that there are a large number of people living their own lives all day, even late at night, and this credit can be attributed to the existence of lighting fixtures. When it comes to how lighting fixtures emit light, I believe everyone can say that it is all thanks to Schottky diodes and light-emitting diodes.
The Selection of Schottky Diode Should Pay Attention to
Depending on the voltage Vo, current IO, heat dissipation, load conditions, installation requirements, required temperature rise of the switching power supply, the type of Schottky diode to be selected should be determined. In the general design, we should leave a certain margin. For example, VR uses less than 80% of its rating, and IF uses less than 40% of its rating.
20A Schottky Diode Model and Package
The main parameters of 20A Schottky diode (SBD) are: If (IO) forward current (a), VRRM reverse withstand voltage (v), IFSM peak transient inrush current (a), IF test current (a), VF forward voltage drop (V), IR reverse leakage current (UA). The Schottky diode is a low-power, ultra-high-speed semiconductor device, and today LXMICRO will give you an example of the typical 20A Schottky diode models and packages.
What Should We Pay Attention to when Using Schottky Diode?
Schottky diodes are widely used.such as vehicle electronics,charger and so on.What should we pay attention to when using Schottky diode wiil be introduced in this paper.
How to Choose a Schottky Diode
Reverse Recovery Time TRR: when the operating voltage changes from a forward to a reverse voltage, the diode works ideally when the current can be cut off instantaneously. In fact, there is usually a slight delay. The amount that determines the current cut-off delay is the reverse recovery time. Although it directly affects the switching speed of the diode, it is not necessarily a small value. That is, when the Schottky diode suddenly reverse from conduction, the reverse current from a large attenuation to close to the time required for IR.
电子商城
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论