Laird Thermal Systems Launches the SuperCool X Series with Next-Gen Thermoelectric Cooling Technology
Refrigerant-free, Thermoelectric Cooler Assemblies boost cooling performance in enclosures, chambers and cabinets without increasing form factor…
Laird Thermal Systems, the leading global thermal management solutions manufacturer, has launched a new high-performance thermoelectric cooler assembly series that utilizes next-generation thermoelectric coolers with advanced semiconductor materials. This enhancement boosts cooling performance by up to 10% over previous models. In combination with a high-performance heat sink and fan shroud assembly, the ultra-compact SuperCool X Series can transfer heat to ambient environments more rapidly than legacy systems. The SuperCool X Series is designed for sample storage compartments commonly found in analytical instrumentation or medical diagnostic chambers with tight geometric space constraints.
At the center of every SuperCool X cooler assembly is an array of high-performance thermoelectric coolers. These high-performance thermoelectric coolers are manufactured with advanced thermoelectric materials that provide increased cooling capacity for the SuperCool X assembly. The next-generation thermoelectric coolers maintain a high coefficient of performance (COP) to minimize the amount of input power required for operation and reduce the heat rejection requirement on the hot side.
The SuperCool X Series contains three model types that provide design engineers with several heat transfer mechanisms on the control side. Heat can be absorbed via convection (air-to-air), conduction (direct-to-air), or liquid (liquid-to-air). The Liquid-to-Air Models SLAX have a cooling capacity of up to 400 Watts, while the Direct-to-Air Models SDAX have up to 220 Watts and the Air-to-Air Model SAAX have up to 175 Watts of heat pumping capacity. All cooling capacities were measured at ΔT=0℃ and Tamb = 35℃ with a nominal operating voltage of 24 VDC. These compact, refrigerant-free thermoelectric cooler assemblies provide an environmentally friendly alternative to compressor-based systems for precise temperature control.
“The SuperCool X Series is a high performance and ultra-compact thermoelectric cooler assembly for medical diagnostics chambers and analytical instrument sample storage compartments,” said Andrew Dereka, Product Director at Laird Thermal Systems. “This product series addresses the market needs for shrinking form factors, higher cooling capacities, and environmentally friendly solutions with no global warming potential.”
Depending on the application, SuperCool X thermoelectric assemblies can be used for heating or cooling. Custom configurations are available upon request.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由玄子转载自Laird Thermal Systems Official Website,原文标题为:Laird Thermal Systems Launches the SuperCool X Series with Next-Gen Thermoelectric Cooling Technology,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【材料】莱尔德热系统推出采用下一代热电制冷技术的SuperCool X系列高性能、超紧凑型热电制冷器组件
近日,全球领先的热管理解决方案制造商Laird Thermal Systems推出一个全新高性能热电制冷器组件系列,该系列采用透过更先进半导体材料实现的下一代热电制冷器,这一改进使其制冷性能比之前产品提高了10%。超紧凑型SuperCool X系列专为常见的分析仪器样本存储室或医学诊断室等具有狭小空间限制的应用而设计。
产品 发布时间 : 2024-06-18
Laird Thermal Systems Expands Nextreme™ Performance Chiller Platform with New Thermoelectric-based Unit
This paper introduces the advantages of Laird Thermal Systems in the application of NCR series products in industrial fields and analytical instruments
产品 发布时间 : 2024-09-14
Laird Thermal Systems Launches PCX Thermoelectric Cooler Series to Increase Reliability of PCR Cycling
This paper mainly introduces the advantages of Laird Thermal Systems with regard to their PCX series Thermoelectric Coolers applications
产品 发布时间 : 2024-09-14
Laird Thermal Systems Developed A Thermal Solution Using Open Cage Active Transceiver Cooler for Active Cooling of Optical Transceivers
Laird Thermal Systems’ Active Transceiver Cooler provides a compact form factor and the cooling efficiency needed to maintain peak performance of QSFPs under ever increasing data transmission speeds for next generation 5G networks.
应用方案 发布时间 : 2024-09-09
Laird Thermal Systems(莱尔德热系统)TEA和温度控制器选型指南
描述- Thermoelectric cooler assemblies are compact units that control the temperature of a wide variety of applications, such as laser diode packages in active optics, lasers in medical and industrial instrumentation, electronic enclosures, sample storage chambers in medical diagnostics and analytical instruments and batteries in various automotive and telecom applications.
型号- LA-045,DA-075-24-02-00-00,DA-034-24-02-00-00,AAC-050,LA-160,DA-014-12-02-00-00,AA-150-48-44-00-XX,AA-200-48-22-00-00,DAT-105-24-02-00-00,SLA-400,AA-200,DAT-040-12-02-00-00,AA-060-12-22-00-00,AA-100-,AAT-032-12-22-00-00,AA-040-24-22-00-00,DAT-065-24-02-00-00,DA-115-24-02-00-00,LL-120-24-00-00-00,AA-200-24-22-00-00,SDAX-135-24-02-00-00,Q SERIES,AA-150-24-44-00-XX,SLA-400-24-02-00-00,SAAX-215,DA-044-24-02-00-00,DL-210,DL-120-24-00-00,DA-045-24-02-00-00,SLAX-140,AA-150-24-22-00-00,385901-001,DA-024-24-02-00-00,AAT-027,SAAX-175,LA-115-24-02-00-00,AA-250-24-44-00-XX,ATT-027-12-22-00-00,AAT-085-12-22-00-00,LA-024-12-02-00-00,LA-045-12-02-00-00,QE-50,SAAX-175-24-22-00-00,DL-060,DA-280-48-02-00-00,NRC400,AA-480,SDAX,DA-160-24-02-00-00,387006702,AA-230,387006704,387006703,387006706,SR-54,387006708,SAAX-115-24-22-00-00,DA-075-12-02-00-00,LL-060-12-00-00-00,387006707,ATT-055-24-22-00-00,AA-024-12-22-00-00,LA-075-24-02-00-00,DAT-029-12-02-00-00,DAC-035-12-02-00-00,SLAX-215-24-02-00-00,AAT-055-12-22-00-00,DA-033-12-02-00-00,AA-100-24-22-00-00,DA-034-12-02-00-00,387004253,DL-060-24-00-00,DA-025,DAT-065-12-02-00-00,AA-230-48-D44-00-XX,DAT-105-12-02-00-00,AA-040-12-22-00-00,DA-280-24-02-00-00,AA-070-24-22-00-00,QC-50,DA-135-24-02-00-00,AA-060-24-22-00-00,DAC-060-24-02-00-00,NRC400-T0-00-PC1,AA-250-48-44-00-XX,AA-250,SDAX-220-24-02-00-00,AA-019-12-22-00-00,LL-210-24-00-00-00,AA-100-48-44-00-XX,PR-59,PR SERIES,DA-044-12-02-00-00,DA-045-12-02-00-00,AAC-050-24-22-00-00,X SERIES,AA-150,DA-024-12-02-00-00,AA-100-24-44-00-XX,DA-045,AAT-085-24-22-00-00,AA-230-24-D44-00-XX,AA-200-48-44-00-XX,DA-011-05-02-00-00,DA-280,LA-024-24-02-00-00,LA-160-24-02-00-00,LL-060,AA-480-24-44-00-XX,SLAX-215,SDAX-220,SAAX-140,AA-040,LA-045-24-02-00-00,SLAX-145-24-02-00-00,AA-200-24-44-00-XX,LL-210,AA-024-24-22-00-00,DL-210-24-00-00,AA-034-12-22-00-00,AA-480-48-44-00-XX,DL-060-12-00-00
AAC-050-24-22 AAC050-24-22-00-00 Cascade Series Thermoelectric Cooler Assembly
型号- AAC050-24-22-00-00,AAC-050-24-22
热电制冷技术在医疗激光器中的应用莱尔德热系统应用说明
型号- ULTRATEC UTX系列,SLA-400 SUPERCOOL X,TUNNEL,POWERCOOL,ULTRATEC™ UTX 系列,SUPERCOOL X,CP系列,ULTRATEC™ UTX,ULTRATEC UTX
MRC300-DH2-HT-DV MRC Series Thermoelectric Cooler Assembly
型号- MRC300-DH2-HT-DV,MRC SERIES,385760-001,MRC
电子商城
服务
使用FloTHERM和Smart CFD软件,提供前期热仿真模拟、结构设计调整建议、中期样品测试和后期生产供应的一站式服务,热仿真技术团队专业指导。
实验室地址: 深圳 提交需求>
提供稳态、瞬态、热传导、对流散热、热辐射、热接触、和液冷等热仿真分析,通过FloTHERM软件帮助工程师在产品设计初期创建虚拟模型,对多种系统设计方案进行评估,识别潜在散热风险。
实验室地址: 深圳 提交需求>
登录 | 立即注册
提交评论