YXC Programmable Differential Crystal Oscillator YSO210PR Series, Frequency 155.52MHz, LVPECL Output, Used in Switches
A switch is a network device that is mainly used for forwarding electrical (optical) signals, allowing independent communication between any two network nodes connected to the switch.
Switches are not limited to Ethernet applications, but also come in many forms such as telephone voice switches and fiber optic switches to meet different network needs.
Fig.1
Switches require a stable clock signal to synchronize the transmission and processing of network data. Crystal oscillators provide such clock signals to ensure that switches can accurately control the forwarding, reception and processing of data packets, thereby ensuring the stability and reliability of the network.
At the same time, switches are connected to other devices in the network through various network interfaces (such as Ethernet ports, fiber optic ports, etc.). The clock signal of the crystal oscillator is used to control the operation of the network interface to ensure accurate transmission and reception of data.
In addition, switches usually need to send management information or perform performance monitoring regularly to ensure the normal operation of the network. The clock signal provided by the crystal oscillator is used to synchronize the operation of the management and monitoring modules to ensure that the switch can perform management and monitoring tasks in a timely and accurate manner.
The following are the typical parameters of OA2EIC112-155.52M in the active crystal oscillator YSO210PR series launched by YXC and its application characteristics in switches:
1. 155.52MHz differential programmable oscillator provides accurate clock signals for the system. This series supports customization of any frequency point in the frequency range of 10-1500MHz, which can be accurate to six decimal places, with fast delivery, and batch delivery within one week at the fastest.
2. In the range of -40~+85℃, the frequency stability is ±50PPM, with high precision and low jitter, ensuring the stability of high-speed data transmission and no packet loss;
3. The differential input subtracts the complementary signal from the real signal to generate a single-ended signal with twice the amplitude relative to the input
YXC crystal oscillator YSO210PR series, the frequency is 155.52MHz, the total frequency difference is ±50PPM, and the following is the YSO210PR series specification.
Fig.1
- |
- +1 赞 0
- 收藏
- 评论 0
本文由恬淡转载自YXC Official Website，原文标题为:YXC Programmable differential crystal oscillator, frequency 155.52MHz, LVPECL output, used in switches，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Yxc Wide Voltage Active Crystal Oscillator, Frequency 15mhz, Package 7050, Working Voltage 3.3V, Used in Charging Piles
The main structure of the charging pile includes the pile body, charging module, display screen, connecting cable, account management module, safety protection device and other parts. According to different power supply methods, it can be divided into AC charging piles and DC charging piles. AC charging piles generally have low current, small pile body and flexible installation； while DC charging piles generally have high current, larger charging capacity in a short time, larger pile body and large occupied area (heat dissipation).
YXC 12MHz Quartz Crystal Oscillator Is Used in Mobile Satellite Antennas, with A Frequency Difference of ±20ppm at Room Temperature
With the rapid development of satellite communication technology, the mobile satellite communication system has become a good means of mobile communication. It has the characteristics of long communication distance, reliable communication quality, rapid communication, and little impact on the environment. It has gradually been favored by people.
Application of Crystal Oscillator YSO510TP Series in GPS Clock System to Provide High-precision Clock
The Global Positioning System (GPS) is a system that provides positioning, navigation and timing services through satellites. GPS consists of multiple orbiting satellites, ground control stations and user equipment. Since the advent of GPS, it has quickly attracted many users with its accurate and convenient positioning function.Among the key components of the GPS system, the temperature compensated crystal oscillator (TCXO) plays an important role.
扬兴晶振石英可编程晶振选型表
YXC石英可编程有源晶振（Q-MEMS）提供以下产品品类：石英可编程振荡器（QMEMS XO）、石英可编程压控振荡器（QMEMS VCXO）、石英可编程温补振荡器（QMEMS TCXO）、石英可编程压控温补振荡器（QMEMS VCTCXO）；支持1MHz~2100MHz任意频点，2016~7050封装尺寸全覆盖，提供CMOS/LVDS/LVPECL/HCSL/CML等单端和多种差分输出方式，抖动值小于150fs，频率稳定度±1.5ppm，-40~﹢105℃、-40~﹢125℃超宽温度范围。
|
产品型号
|
品类
|
频率（KHz/MHz)
|
负载电容(pF)
|
温度稳定度(ppm)
|
工作温度
|
|
Y8OGC-111-32.768K
|
圆柱体晶振
|
32.768kHz
|
12.5pF
|
10ppm
|
-20℃~+70℃
|
选型表 - 扬兴晶振 立即选型
What are the Common Cutting Processes for Crystal Oscillators
The more common cutting types of crystal oscillators are briefly introduced in three types: AT, BT, and SC cutting.
There are Two Main Types of Crystal Oscillators: Active Crystal Oscillators and Passive Crystal Oscillators
Self-oscillation characteristics of active crystal oscillators and usage requirements of passive crystal oscillators. The content involves the internal structure of crystal oscillators, especially the piezoelectric effect of quartz crystals and their role in mechanical vibration.
How Does Crystal Meet the Age of 5G Communication
Crystal is the core electronic component of 5G technology. Its role is to provide high-end reference clock signals and receive transmission signals. 5G technology must be very accurate and efficient in all aspects, so the requirements for the crystal oscillator will be as high as possible.
Temperature Compensated Crystal Oscillator Is Also One of The Quartz Crystal Oscillators, Referred to as “temperature Compensated Crystal Oscillator“
What are the characteristics of temperature compensated crystal oscillator? Because electronic products in different fields have different demands for quartz crystal oscillators, and temperature-compensated crystal oscillators were developed to compensate for the instability of ordinary crystal oscillators at high temperatures. However, temperature-compensated crystal oscillators have There are many types of temperature compensated crystal oscillators, each with its own characteristics.
Tips for Crystal Oscillator Circuit Design, Essential Skills for Engineers!
As an indispensable signal transmitter in the clock circuit, the crystal oscillator is required for the microcontroller to operate normally. Therefore, the participation of the crystal oscillator is also indispensable in the design of electronic circuits. A good crystal oscillator circuit design can provide the best space utilization for electronics and play the greatest functional role.
How to Gradually Determine The Parameters and Type When Choosing A Quartz Crystal Oscillator
Crystal oscillators are used in more and more communication equipment. With the development of technology, the types of quartz crystal oscillators are also increasing. Therefore, many users are paying attention to how to choose the parameters and type of crystal oscillators. Yangxing will talk to you about three directions to determine your crystal oscillator type.
Does a Passive Crystal Oscillator Have a Direction?
A passive crystal oscillator has no direction, and the pins of a passive crystal oscillator do not distinguish between positive and negative poles.
Crystal Oscillator PPM Error Analysis and Calculation Method
Crystal oscillator accuracy is usually measured in PPM, which describes the frequency stability or deviation of the crystal oscillator. PPM represents the relative error between the actual output frequency and the nominal frequency, and is an important parameter for measuring the frequency accuracy of the crystal oscillator.
YXC Programmable Differential Oscillator, Frequency 50MHz, 7050 package, LVDS output, applied to SVG
The static var generator (SVG) is an advanced power electronic device that can quickly control the grid voltage and keep the reactive power of the grid in a normal state, thus ensuring the stability and continuity of the grid. Static var generators are widely used in the field of reactive power control in power systems because of their fast response and high-precision voltage regulation capabilities. The crystal oscillator plays a key role in providing stable clock signals in SVG.
电子商城
品牌：EPSON
品类：Temperature Compensated Crystal Oscillator
价格：￥3.4249
现货： 57,044
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论