SKYLAB SKG12 Series Pure BeiDou Module Serving BeiDou-3 Satellite
Beidou-3 is the world's first satellite navigation system to provide three frequency signal services. The use of dual frequency signals in satellite navigation systems can weaken the impact of ionospheric delay, while using triple frequency signals can construct more complex models to eliminate high-order errors in ionospheric delay and improve the efficiency of carrier phase ambiguity resolution. In theory, this can improve carrier convergence speed. Therefore, the subsequent GPS will also adopt a three frequency signal system.
Beidou-2 provides three public service signals, B1I, B2I, and B3I, in the B1, B2, and B3 frequency bands. The center frequency of the B1 frequency band is 1561.098MHz, B2 is 1207.14MHz, and B3 is 1268.52MHz. Beidou-3 provides five public service signals, namely B1I, B1C, B2a, B2b, and B3I, in the B1, B2, and B3 frequency bands. The center frequency of the B1 frequency band is 1575.42MHz, B2 is 1176.45MHz, and B3 is 1268.52MHz.
The BeiDou navigation and positioning module developed based on BeiDou satellite can better meet market demand, achieve higher positioning accuracy with the support of BeiDou satellite, and also have strong anti-interference performance. The SKG12 series pure BeiDou module products developed by SKYLAB are as follows:
SKG12DI-02H Product Introduction
SKG12DI-02H is a Beidou dual frequency integrated navigation and
positioning module developed by SKYLAB, which only receives signals from
Beidou navigation satellites (including Beidou-2 and Beidou-3). This
module integrates 3-axis accelerometers and 3-axis gyroscopes for
multi-source information fusion, combined with BeiDou positioning
technology and inertial navigation technology. In environments with poor
or even lost BeiDou signal quality, it can still continuously output
positioning data, providing continuous and accurate positioning services
for navigation and positioning applications.
Widely used in vehicle navigation, vehicle networking, intelligent cockpit, location tracking, vehicle networking, logistics tracking and other scenarios.
SKG12D-09A Product Introduction
SKG12D-09A is a dual frequency positioning and navigation module launched by SKYLAB that only receives signals from Beidou navigation satellites (including Beidou-2 and Beidou-3). Internally integrated with a baseband RF integrated SOC chip, it can support BDS B1I+B1C+B2A frequency points and fully support the Beidou three signals, providing users with strong anti-interference, low power consumption, and high-quality positioning and navigation solutions.
SKG12D-09A adopts an industry standard packaging of 12.2mm * 16mm. Production complies with IATF16949, and module reliability testing complies with ISO 16750.
Supports A-BDS assisted positioning, supports raw observation output (RTCM3.3 protocol), and supports simultaneous operation of BDS BII+B1C. Supports power supply to active antennas, with functions such as antenna status detection and interference detection alarms.
SKG12S-09A Product Introduction
SKG12S-09A module is a Beidou positioning and navigation module launched by SKYLAB. The module integrates SKYLAB's independently developed SOC baseband and RF integrated BeiDou chip, fully supporting the BeiDou three signals, and providing users with strong anti-interference, low power consumption, and high-quality positioning and navigation solutions.
In order to meet the demand for compact and fast installation of positioning terminal products, we have reduced the module volume during product design. The module size is 16.6mm x 12.2mm x 2.2mm and is packaged with a 24 pin stamp hole. Production complies with IATF16949, and module reliability testing complies with ISO16750.
The Beidou module integrates power management functions internally, with built-in SAW and LNA. Supports BDS B1I/B1C frequency points, supports BDS single-mode operation, supports A-BDS auxiliary positioning, supports power supply to active antennas, has antenna status detection function, and has interference detection alarm function.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Natalia转载自SKYLAB Official Website,原文标题为:SKG12 series pure BeiDou module serving BeiDou-3 satellite,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Neoway Technology Launches a Diverse GNSS Module Portfolio: Enhancing Positioning Services with Greater Accuracy and Speed
This year, Neoway Technology launched a diverse GNSS module portfolio. These modules are designed for diverse sectors such as electric power, logistics tracking, vehicular navigation, vehicle monitoring, robotics, geospatial monitoring, and unmanned aerial vehicles (UAVs). Offering high fix rates, precision, and reliability, these modules are tailored to meet the requirements of different regions and scenarios.
服务于北斗三号卫星的SKG12系列纯北斗模组
基于北斗卫星研发的北斗导航定位模组能够更好的满足市场需求,在北斗卫星的支持下达到更高的定位精度,同时还具备非常强的抗干扰性能,本文介绍SKYLAB研发的SKG12系列纯北斗模块产品。
SKG122DB Single Frequency Pure BeiDou Module with Low Cost and High Cost-effectiveness
SKG122DB is a low-cost and cost-effective BeiDou positioning module that supports receiving BDSB1 (B1I, B1C) satellite signals. SKG122DB has a small size, high integration, and is easy to apply, making it very suitable for GNSS scale applications with high cost requirements.
【技术】解析单频、单模、双频、双模定位模块如何区分
初接触GNSS模块的工程师们在选型的时候经常会被单频GPS模块,单模GPS模块,单模北斗模块,GPS+北斗双模定位模块,双频GPS模块,双频双模定位模块这些信息绕晕。本篇天工测控就来简单为大家介绍一下单频,单模,双频,双模定位模块的区别吧。
【技术】GPS模块、北斗模块、RTK模块、惯导模块、授时模块基本常识答疑
针对室外位置服务应用需求,天工测控研发推出了支持L1,L5频段 GPS、北斗、GLONASS、GALILEO、QZSS、IRNSS卫星信号的GPS、北斗二号/三号、RTK、惯导、授时模块。本篇是SKYLAB小编整理的工程师们前期做调研时比较关注的GPS模块、北斗模块、RTK模块、惯导模块、授时模块问题,希望能帮助到有同样困惑的工程师及采购们。
SKYLAB低功耗单北斗多频车载定位导航模块,推算定位误差小于3%,推动智能交通领域发展
北斗卫星导航系统从区域服务扩展到全球服务,在市场需求推动、政策支持与产业发展的背景下,低功耗单北斗多频车载定位导航模块因高集成度、低功耗、多频点接收等特点,在精准定位导航、提升行车安全、优化交通管理、降低运营成本、支持智能网联汽车发展等方面有应用优势。天工测控SKG12DI-02、SKG12D-09H等系列模块支持智能网联汽车发展。
【产品】基于AG3335方案推出SPI接口双频定位模块SKG123S,亮相IOTE 2021国际物联网展
天工测控推出基于AG3335方案SPI接口双频定位模块SKG123S,亮相IOTE 2021国际物联网展。它是一款高性能的、多系统双频导航定位模块,能同时支持GPS、北斗、GLONASS、Galileo、QZSS的卫星接收模块,L1+L5双频的定位使定位更快。
Excellent Application of SKG12DI-02 Single Beidou Module in Road Inspection
In modern transportation systems, road safety and smoothness are crucial. In order to ensure the good condition of the road, road inspection work is indispensable. The emergence of SKG12DI-02 single Beidou module has brought a new revolution and improvement to road inspection.
【技术】解析GNSS授时模块的工作原理和应用领域
有时间同步需求的工程师会在网上找能满足时间同步的高精度授时模块,但是非硬件工程师就会有一个疑问,GNSS授时模块怎么用,怎么通过授时模块来提取到所需要的时间信息。本篇GNSS授时模块研发厂家SKYLAB为大家来解读授时模块的工作原理。
【技术】GPS模块的种类及工作原理介绍
GPS模块并不播发信号,属于被动定位。市面上所有GPS模块的协议都是NMEA。那么问题来了,GPS模块有哪几种?GPS接收模块的工作原理是怎样的呢?本文天工测控将进行介绍。
【技术】深度揭秘GNSS是如何实现授时功能的
现代最常用的授时方式就是卫星授时,且广泛应用于车载导航、车辆监控、交通调度、航运、通信基站、电力金融授时等领域。本篇资深GNSS授时模块研发厂家SKYLAB就来为大家深度揭秘一下GNSS是如何实现授时功能的。
【IC】天工测控新推±2ns高精度双频授时模块SKG123NT,提供1PPS秒脉冲信号和高达10Hz的PVT信息输出
SKYLAB新推出的±2ns的双频授时模块SKG123NT可实现功能性替代SKG121T,模块可提供1PPS(1 Pulse Per Second)秒脉冲信号和高达10Hz的PVT信息输出,且支持PPS延时调整。已小批,可购买样品实测。
【选型】交通信号灯高精度天工测控GNSS授时模块选型技巧
交通信号灯在一定程度上能够起到缓解交通压力的作用,而作用其中的GNSS授时模块才是主力高效,准确,实时的对城市交通信号灯进行统一授时的大功臣。本文天工测控就以北斗授时模块为切入点,简单介绍一下交通信号灯授时模块的选型要点。
电子商城
服务
可定制电线特性阻抗50-80Ω,静电容量54-110pF/m,减衰量0.5-0.7db/m以下,芯对数和截面积、尺寸长度;支持B超电线、内窥镜电线、血液分析仪电线、医疗USB电线、病床设备电线定制。
最小起订量: 1000m 提交需求>
登录 | 立即注册
提交评论