What is the Method to Detect the Switching Hall IC?

2024-07-12 AHNJ AH Official Website
Switching Hall IC,Hall sensor,Micropower Omnipolar Hall Sensor,switching Hall element Switching Hall IC,Hall sensor,Micropower Omnipolar Hall Sensor,switching Hall element Switching Hall IC,Hall sensor,Micropower Omnipolar Hall Sensor,switching Hall element Switching Hall IC,Hall sensor,Micropower Omnipolar Hall Sensor,switching Hall element

As Hall sensor Suppliers, we share with you.


When we use the Hall element to repair the machine, we will encounter the situation that the Hall does not work, and it is impossible to distinguish whether the Hall element is damaged from the shape of the Hall. The following teaches you how to detect whether the switch type Hall element is damaged. Taking Hall sensor as an example, the test method of switching Hall element is as follows:


Micropower Omnipolar Hall Sensor


First, find a resistor R of 1KΩ, connect it between pins ① and ③, and connect the positive pole of the 12V DC power supply to the pin ① of the switch-type Hall element sensor, and the negative pole to pin ②. Put the multimeter in the DC 50V gear, connect the red test lead to the ③ foot, and the black test lead to the ② foot, and observe the change of the multimeter pointer. When the N pole of the magnet is close to the test point of the Hall element, the pointer of the multimeter deflects from the high level to the low level; when the N pole of the magnet is far from the test point of the Hall element, the pointer of the multimeter changes from the low level High level deflection. If the N pole of the magnet is close to or far away from the test point of the Hall element, the pointer of the multimeter will not deflect. It means that the Hall element is damaged and should be replaced in time. In addition, it should be noted that the side of the Hall device with the model mark is the sensitive side, and it should face the corresponding magnetic pole of the permanent magnet, that is, the N-type device is facing the N-pole, and the S-type device is facing the S-pole. Otherwise, the sensitivity of the device is greatly reduced, and it may not even work.


Note: Switching Hall IC refers to unipolar, bipolar, bipolar latching, omnipolar Hall element, the output of which is a digital model; while analog Hall element refers to a linear Hall element.


To detect the quality and performance of the linear Hall, we need to prepare the following tools: a linear Hall, a magnet and a voltmeter (pointer or digital) or a multimeter. The detection of the quality of the linear Hall element is the same as that of other components. The simplest method to judge is to observe the change.

授权代理商:世强先进(深圳)科技股份有限公司
技术资料,数据手册,3D模型库,原理图,PCB封装文件,选型指南来源平台:世强硬创平台www.sekorm.com
现货商城,价格查询,交期查询,订货,现货采购,在线购买,样品申请渠道:世强硬创平台电子商城www.sekorm.com/supply/
概念,方案,设计,选型,BOM优化,FAE技术支持,样品,加工定制,测试,量产供应服务提供:世强硬创平台www.sekorm.com
集成电路,电子元件,电子材料,电气自动化,电机,仪器全品类供应:世强硬创平台www.sekorm.com
  • +1 赞 0
  • 收藏
  • 评论 0

本文由莫子若转载自AHNJ AH Official Website,原文标题为:What is the Method to Detect the Switching Hall IC?,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。

相关研发服务和供应服务

评论

   |   

提交评论

全部评论(0

暂无评论

相关推荐

How to Measurement Hall Effect Sensor?

While Hall Effect Sensors are mostly utilized to spot things and spaces, they can likewise be made use of for present dimension. As established at the beginning of this overview, the Hall Result is based on the connection in between electromagnetic fields and also currents, with the devices above making use of electromagnetic fields to develop currents as an outcome.

2024-07-30 -  技术探讨 代理服务 技术支持 批量订货

The Future Development Trend of Hall Sensor

Hall Sensor is the world‘s third-largest sensor product, which is widely used in industrial, automotive, computer, mobile and emerging consumer electronics. In the next few years, as more and more automotive electronics and industrial design companies move to China, Hall sensors‘ annual sales in the Chinese market will maintain a high growth rate of 20% to 30%. At the same time, the related technologies of Hall Effect Sensor are still being improved, and programmable Hall sensors, intelligent Hall sensors and micro Hall sensors will have better market prospects.

2024-07-16 -  技术探讨 代理服务 技术支持 批量订货

What is the Connection Method of the Hall Current Sensor?

Hall current sensors and voltage sensors only need to be connected to a positive and negative DC power supply. The measured current bus generally passes through the sensor or is connected to the primary side terminal, and then some simple connections are made on the secondary side to complete the main control circuit. Isolation detection, circuit design is very simple.

2024-07-29 -  技术探讨 代理服务 技术支持 批量订货

AH3013锁存型霍尔传感器

描述- 该资料介绍了南京艾驰电子科技有限公司生产的Latch Type Hall Sensor AH3013霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速开关响应时间等特点,适用于各种工业和环境条件下的位置检测和控制。

型号- AH3013

2017/8/14  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货

AH413锁存型霍尔传感器

描述- 该资料介绍了Nanjing AH Electronic Science & Technology Co., Ltd.生产的AH413型号闩锁式霍尔传感器。该传感器具有宽工作电压范围(4.5V ~ 24V)、低极限电压(最低至3.5V)、宽温度操作范围(-55℃ ~ 150℃)等特点。它采用无触点设计,提供高可靠性和安全性。此外,还提供了详细的电气特性和磁特性参数。

型号- AH413

2017/8/14  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货

AH3012锁存型霍尔传感器

描述- 该资料介绍了南京艾驰电子科技有限公司生产的AH3012型闩锁式霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速响应时间等特点,适用于各种工业和环境条件下的位置检测和控制。

型号- AH3012

2017/8/14  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货

AH49E线性霍尔传感器

描述- 该资料介绍了南京艾驰电子科技有限公司生产的线性霍尔传感器AH49E。该传感器具有宽工作电压范围(4.5V ~ 6.5V)、宽工作温度范围(-40℃ ~ 125℃),提供铁路到铁路电压输出,并具备反向电压保护、电压调节器、温度补偿电路等功能。此外,还提供了详细的电学参数和应用说明。

型号- AH49E

2017/8/15  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货

AH3012R锁扣式霍尔传感器

描述- 该资料介绍了南京艾驰电子科技有限公司生产的AH3012R型闩锁式霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速响应时间等特点,适用于各种工业和环境条件下的位置检测和控制。

型号- AH3012R

2017/8/14  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货

Hall Effect Sensors- Which Is Best for Your Design?

Hall Effect Sensors are Utilized in a Wide Selection of applications, Such as factory and process automation,Construction, home, and office automation; Clinical Programs,Freedom and robotics controls,farming and heavy machines,backyard and power tools,and household items like washing machines, tumble dryers, induction stoves, and heating and cooling (HVAC) systems. With possible applications in so many programs and lots of kinds of Hall detectors available, we‘re often asked which is best at a given layout.Hall Switches Turn On or Off Based On Fixed Threshold Level ComparisonsLinear Hall Senso

2024-07-28 -  技术探讨 代理服务 技术支持 批量订货

What Is A Hall Sensor In A Washing Machine?

The Hall Sensor, also as the rotor position sensor (RPS) is a portion of the automatic system of the washing machine. It assists the control board be certain everything is operating as it should. Essentially, hall sensor keeps an eye on the washer motor to make sure it‘s working properly and in the right time during your washing cycle.

2024-07-20 -  技术探讨 代理服务 技术支持 批量订货

What Should you Know About Hall Sensors?

Hall sensor is the third-ranked sensor product in the world. It is widely used in industry, automobile industry, computers, mobile phones and emerging consumer electronics fields.

2024-07-19 -  产品 代理服务 技术支持 批量订货

You Need to Know about Sensor

Displacement sensor, also known as linear sensor, is a linear device belonging to metal induction. The function of the sensor is to convert various measured physical quantities into electricity.

2024-07-26 -  技术探讨 代理服务 技术支持 批量订货

How to Prevent the Sensor from Getting Wet?

As a precise detection device, the sensor is troublesome if it is damp. The moisture of the sensor will affect its accuracy and stability, and it will cause serious damage. If the sensor is used in a more important place, the loss will be caused. It is very heavy. then how to prevent moisture? Hall Sensor Manufacturer to explain to you.

2024-07-18 -  技术探讨 代理服务 技术支持 批量订货

AH3503线性霍尔传感器

描述- 该资料介绍了AH3503线性霍尔传感器的技术规格和应用。它是一种模拟信号输出的霍尔IC,具有内置的反向电压保护器、稳压器、温度补偿电路等功能。传感器适用于汽车电子、消费电子产品和工业电子设备,提供稳定的开关信号且无需机械接触或火花,具备高可靠性和安全性。

型号- AH3503/K-M,AH35□□□,AH3503,AH3503/E-UA,AH3503/K-UA,AH3503/E-M

2024/3/18  - 艾驰电子  - 数据手册 代理服务 技术支持 批量订货 查看更多版本

Do you know the Precautions when using Hall IC?

Do you know the Precautions when using Hall IC? As a Hall Sensor Suppliers, share with you.

2024-07-25 -  产品 代理服务 技术支持 批量订货
展开更多

电子商城

查看更多

品牌:MELEXIS

品类:Micropower & Omnipolar Hall Switch

价格:¥1.5051

现货: 5,000

品牌:MELEXIS

品类:Micropower & Omnipolar Hall Switch

价格:¥1.2269

现货: 3,795

品牌:MELEXIS

品类:Micropower & Omnipolar Hall Switch

价格:¥1.5768

现货: 103

品牌:MELEXIS

品类:Micropower & Omnipolar Hall Switch

价格:¥1.2853

现货: 70

品牌:洺太

品类:Hall Sensor

价格:¥0.5200

现货: 10

品牌:洺太

品类:Hall Sensor

价格:¥0.9900

现货: 10

品牌:TE connectivity

品类:连接器

价格:

现货: 0

品牌:LITTELFUSE

品类:hall effect sensor

价格:

现货: 0

品牌:TT Electronics

品类:High-reliability Hallogic Hall-Effect sensor

价格:

现货: 0

品牌:TT Electronics

品类:High-reliability Hallogic Hall-Effect sensor

价格:

现货: 0

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

现货市场

查看更多

暂无此商品

海量正品紧缺物料,超低价格,限量库存搜索料号

服务

查看更多

MCU烧录/Flash烧录/CPLD烧录

可烧录IC封装SOP/MSOP/SSOP/TSOP/TSSOP/PLCC/QFP/QFN/MLP/MLF/BGA/CSP/SOT/DFN;IC包装Tray/Tube/Tape;IC厂商不限,交期1-3天。支持IC测试(FT/SLT),管装、托盘装、卷带装包装转换,IC打印标记加工。

最小起订量: 1pcs 提交需求>

2G/3G/4G射频测试

支持GSM / GPRS 等多种制式产品的射频测试,覆盖所有上行和下行的各项射频指标,包括频差、相差、调制、功率、功控、包络、邻道泄漏比、频谱、杂散、灵敏度、同道干扰、邻道干扰、互调、阻塞等等。满足CE / FCC / IC / TELEC等主流认证的射频测试需求。

实验室地址: 深圳 提交需求>

查看更多

授权代理品牌:接插件及结构件

查看更多

授权代理品牌:部件、组件及配件

查看更多

授权代理品牌:电源及模块

查看更多

授权代理品牌:电子材料

查看更多

授权代理品牌:仪器仪表及测试配组件

查看更多

授权代理品牌:电工工具及材料

查看更多

授权代理品牌:机械电子元件

查看更多

授权代理品牌:加工与定制

世强和原厂的技术专家将在一个工作日内解答,帮助您快速完成研发及采购。
我要提问

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

研发客服
商务客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面