2 Reasons To Choose Induction Over Hall Effect Sensors
Hall Effect Sensors are a well-established non-contact detector alternative for many demanding and arduous software. Utilizing semiconductor Hall processors and a magnet attached to a rotating shaft or push pole, the output signal in response to the proximity of the magnet varies and its position can, consequently, be quantified.
1. Because the Inductive sensor is an actual solid-state device, it has no moving parts, bearings, or shaft that require sealing which can subsequently wear or fail. This usually means the inductive device can be set up in the most difficult of environments in which water, dirt, grease, grit, sand, and vibration can be encountered which may cause premature failure of mechanical elements.
2. Similarly, since the Hall IC utilizes a magnet as its actuator, this makes it vulnerable to interference in magnetized metalwork and electronics, undermining its performance. This susceptibility to magnetic interference isn't shared with the inductive detector, enhancing its suitability for challenging environments and reliable operation.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由莫子若转载自AHNJ AH Official Website，原文标题为:2 Reasons To Choose Induction Over Hall Effect Sensors，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
The Future Development Trend of Hall Sensor
Hall Sensor is the world‘s third-largest sensor product, which is widely used in industrial, automotive, computer, mobile and emerging consumer electronics. In the next few years, as more and more automotive electronics and industrial design companies move to China, Hall sensors‘ annual sales in the Chinese market will maintain a high growth rate of 20% to 30%. At the same time, the related technologies of Hall Effect Sensor are still being improved, and programmable Hall sensors, intelligent Hall sensors and micro Hall sensors will have better market prospects.
Wide Application of Zero Power Consumption Magnetic Sensor
The zero power consumption magnetic sensor is used for position inquiry, and the same size magnetic sensor provides a greater switching distance than an inductive sensor. Non-ferrous metal walls and aluminum walls do not affect their switching performance. This vibration-resistant sensor can be installed on the side or front use. The magnet can be flush mounted in the steel material and sensing the north and south poles. The zero power consumption magnetic sensor provides the best sensor model for each cylinder type.
How to Measurement Hall Effect Sensor?
While Hall Effect Sensors are mostly utilized to spot things and spaces, they can likewise be made use of for present dimension. As established at the beginning of this overview, the Hall Result is based on the connection in between electromagnetic fields and also currents, with the devices above making use of electromagnetic fields to develop currents as an outcome.
AH3661数字微功耗全极霍尔IC
描述- 该资料介绍了AH3661数字全极性霍尔IC的特性、应用示例、选择指南、通用描述、引脚列表、绝对最大额定值、电气工作特性、磁操作特性、磁性行为、低平均功率消耗、封装信息和标记信息。它适用于汽车电子、消费电子产品和工业电子设备，具有稳定的温度范围、低电压运行能力和多种封装选项。
型号- AH36XX□□,AH3661/E-UA,AH3661/E-M,AH3661
What Should you Know About Hall Sensors?
Hall sensor is the third-ranked sensor product in the world. It is widely used in industry, automobile industry, computers, mobile phones and emerging consumer electronics fields.
AH3134数字单极霍尔IC
描述- 该资料介绍了数字单极霍尔IC AH3134的特性、应用示例、选择指南、通用描述、引脚列表、绝对最大额定值、电气工作特性、磁操作特性、特性曲线、磁性行为、封装信息和标记信息。AH3134是一款具有高灵敏度数字输出的霍尔IC，适用于汽车电子、消费电子产品和工业电子等领域。
型号- AH31□□□,AH3134/L-S,AH3134/K-M,AH3134/L-UA,AH3134
How to Prevent the Sensor from Getting Wet?
As a precise detection device, the sensor is troublesome if it is damp. The moisture of the sensor will affect its accuracy and stability, and it will cause serious damage. If the sensor is used in a more important place, the loss will be caused. It is very heavy. then how to prevent moisture? Hall Sensor Manufacturer to explain to you.
AH3031高灵敏度数字双极锁存霍尔集成电路
描述- 该资料介绍了AH3031高灵敏度数字双极锁存霍尔IC的特性、应用示例、选择指南、一般说明、绝对最大额定值、电气工作特性、磁操作特性、特性曲线、磁性行为、封装信息和标记信息。它是一种具有单输出的高灵敏度数字双极锁存霍尔IC，适用于汽车电子、消费电子产品和工业电子产品等领域。
型号- AH3031/K-M,AH3031/L-UA,AH30□□□,AH3031/L-S,AH3031
What is the Connection Method of the Hall Current Sensor?
Hall current sensors and voltage sensors only need to be connected to a positive and negative DC power supply. The measured current bus generally passes through the sensor or is connected to the primary side terminal, and then some simple connections are made on the secondary side to complete the main control circuit. Isolation detection, circuit design is very simple.
AH3503线性霍尔传感器
描述- 该资料介绍了AH3503线性霍尔传感器的技术规格和应用。它是一种模拟信号输出的霍尔IC，具有内置的反向电压保护器、稳压器、温度补偿电路等功能。传感器适用于汽车电子、消费电子产品和工业电子设备，提供稳定的开关信号且无需机械接触或火花，具备高可靠性和安全性。
型号- AH3503/K-M,AH35□□□,AH3503,AH3503/E-UA,AH3503/K-UA,AH3503/E-M
Can Hall Effect Sensor Be Used for Magnetic Field Measurement?
Hall-effect switches and instrument-level sensors are becoming more and more popular in industrial applications. Today, product and manufacturing process designers can choose a variety of highly integrated Hall-effect devices. Although there is still a lot of confusion as to what specifications are needed and magnetic field measurements in general, these devices have proven to be quite easy to use.
Hall Effect Sensors- Which Is Best for Your Design?
Hall Effect Sensors are Utilized in a Wide Selection of applications, Such as factory and process automation,Construction, home, and office automation； Clinical Programs,Freedom and robotics controls,farming and heavy machines,backyard and power tools,and household items like washing machines, tumble dryers, induction stoves, and heating and cooling (HVAC) systems. With possible applications in so many programs and lots of kinds of Hall detectors available, we‘re often asked which is best at a given layout.Hall Switches Turn On or Off Based On Fixed Threshold Level ComparisonsLinear Hall Senso
Do You Know Low-Cost Hall Effect Sensor and Simplified Switching?
Simplified shifting is a Hall sensor IC powerful purpose. The output signal is clean, fast, and changed without bounce (an underlying issue with mechanical switches). A Hall-effect switch generally works at up to some 100kHz repetition rate and costs less than several common electromechanical switches.
Odometer Sensor Detection Method
The odometer sensor is generally Hall Effect Sensor. You can use a multimeter to test resistance, or test continuity.
You Need to Know about Sensor
Displacement sensor, also known as linear sensor, is a linear device belonging to metal induction. The function of the sensor is to convert various measured physical quantities into electricity.
电子商城
品牌：MELEXIS
品类：Programmable Linear Hall Effect Sensor
价格：￥20.6808
现货： 22,334
品牌：MELEXIS
品类：Programmable Linear Hall Effect Sensor
价格：￥15.2298
现货： 125
品牌：MELEXIS
品类：Programmable Linear Hall Effect Sensor
价格：￥14.5375
现货： 68
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论