What should I Pay Attention to When Installing the Sensor?
In today's society, many industries use sensors to detect information, which allows technicians to better research results. What should be paid attention to during installation? Hall Sensor Manufacturer has the following recommendations.
1. When designing and installing, the bottom pressure outlet hole should be considered as much as possible to eliminate the error caused by temperature change and temperature compensation can be introduced if necessary.
2. The secondary instrument should use a smart meter whenever possible, which makes it easy to change the range and achieve temperature compensation.
3. When measuring steam or other high temperature media, the temperature of the sensor should not exceed the limit temperature used by the sensor, and the use temperature of the heat sink is higher than the limit temperature used by the sensor.
4. The measured media is not allowed to freeze. Otherwise, the sensor element isolation diaphragm will be damaged, causing damage to the sensor. If necessary, the sensor should be temperature-protected to prevent freezing.
5. The sensor memory cannot be used for sensors above 36V, causing damage to the Gear Sensor and the inability to hard contact the sensor object, resulting in damage to the diaphragm.
6. When measuring steam or other high temperature media, a heat pipe should be used to connect the sensor to the pipe and transfer it to the transformer using the pressure on the pipe. When the measured medium is water vapor, an appropriate amount of water should be injected into the heat pipe to prevent the superheated steam from directly contacting the sensor and damaging the sensor.
The above is what the sensor needs to pay attention to.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Natalia转载自AHNJ AH Official Website，原文标题为:What should I Pay Attention to when Installing the Sensor?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
What is a Gear Sensor?
“Gear Position Sensor” to detect the shift position. Generally, a device called “transmission” is mounted on the vehicles such as motorcycles and cars, which run on the engine power. The transmission is the device which keeps rotating speed of the engine within proper range by the combination of the gears.
The Future Development Trend of Hall Sensor
Hall Sensor is the world‘s third-largest sensor product, which is widely used in industrial, automotive, computer, mobile and emerging consumer electronics. In the next few years, as more and more automotive electronics and industrial design companies move to China, Hall sensors‘ annual sales in the Chinese market will maintain a high growth rate of 20% to 30%. At the same time, the related technologies of Hall Effect Sensor are still being improved, and programmable Hall sensors, intelligent Hall sensors and micro Hall sensors will have better market prospects.
How to Measurement Hall Effect Sensor?
While Hall Effect Sensors are mostly utilized to spot things and spaces, they can likewise be made use of for present dimension. As established at the beginning of this overview, the Hall Result is based on the connection in between electromagnetic fields and also currents, with the devices above making use of electromagnetic fields to develop currents as an outcome.
AH3013锁存型霍尔传感器
描述- 该资料介绍了南京艾驰电子科技有限公司生产的Latch Type Hall Sensor AH3013霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速开关响应时间等特点，适用于各种工业和环境条件下的位置检测和控制。
型号- AH3013
AH413锁存型霍尔传感器
描述- 该资料介绍了Nanjing AH Electronic Science & Technology Co., Ltd.生产的AH413型号闩锁式霍尔传感器。该传感器具有宽工作电压范围（4.5V ~ 24V）、低极限电压（最低至3.5V）、宽温度操作范围（-55℃ ~ 150℃）等特点。它采用无触点设计，提供高可靠性和安全性。此外，还提供了详细的电气特性和磁特性参数。
型号- AH413
AH3012锁存型霍尔传感器
描述- 该资料介绍了南京艾驰电子科技有限公司生产的AH3012型闩锁式霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速响应时间等特点，适用于各种工业和环境条件下的位置检测和控制。
型号- AH3012
AH49E线性霍尔传感器
描述- 该资料介绍了南京艾驰电子科技有限公司生产的线性霍尔传感器AH49E。该传感器具有宽工作电压范围（4.5V ~ 6.5V）、宽工作温度范围（-40℃ ~ 125℃），提供铁路到铁路电压输出，并具备反向电压保护、电压调节器、温度补偿电路等功能。此外，还提供了详细的电学参数和应用说明。
型号- AH49E
AH3194齿轮转速传感器
描述- 该资料介绍了AH3194齿轮速度传感器的主要特点和功能。它是一种具有自适应性调整和数字输出功能的汽车专用齿轮传感器，适用于普通速度测量应用。传感器内部包含一个霍尔元件和一个10位模数转换器，可实现齿形识别。其工作温度范围为-40℃至125℃，符合欧盟RoHS & REACH标准。
型号- AH3194
What is the Connection Method of the Hall Current Sensor?
Hall current sensors and voltage sensors only need to be connected to a positive and negative DC power supply. The measured current bus generally passes through the sensor or is connected to the primary side terminal, and then some simple connections are made on the secondary side to complete the main control circuit. Isolation detection, circuit design is very simple.
AH3012R锁扣式霍尔传感器
描述- 该资料介绍了南京艾驰电子科技有限公司生产的AH3012R型闩锁式霍尔传感器。该传感器具有宽工作电压范围、低温度漂移、快速响应时间等特点，适用于各种工业和环境条件下的位置检测和控制。
型号- AH3012R
What Is A Hall Sensor In A Washing Machine?
The Hall Sensor, also as the rotor position sensor (RPS) is a portion of the automatic system of the washing machine. It assists the control board be certain everything is operating as it should. Essentially, hall sensor keeps an eye on the washer motor to make sure it‘s working properly and in the right time during your washing cycle.
Hall Effect Sensors- Which Is Best for Your Design?
Hall Effect Sensors are Utilized in a Wide Selection of applications, Such as factory and process automation,Construction, home, and office automation； Clinical Programs,Freedom and robotics controls,farming and heavy machines,backyard and power tools,and household items like washing machines, tumble dryers, induction stoves, and heating and cooling (HVAC) systems. With possible applications in so many programs and lots of kinds of Hall detectors available, we‘re often asked which is best at a given layout.Hall Switches Turn On or Off Based On Fixed Threshold Level ComparisonsLinear Hall Senso
AH3503线性霍尔传感器
描述- 该资料介绍了AH3503线性霍尔传感器的技术规格和应用。它是一种模拟信号输出的霍尔IC，具有内置的反向电压保护器、稳压器、温度补偿电路等功能。传感器适用于汽车电子、消费电子产品和工业电子设备，提供稳定的开关信号且无需机械接触或火花，具备高可靠性和安全性。
型号- AH3503/K-M,AH35□□□,AH3503,AH3503/E-UA,AH3503/K-UA,AH3503/E-M
How to Prevent the Sensor from Getting Wet?
As a precise detection device, the sensor is troublesome if it is damp. The moisture of the sensor will affect its accuracy and stability, and it will cause serious damage. If the sensor is used in a more important place, the loss will be caused. It is very heavy. then how to prevent moisture? Hall Sensor Manufacturer to explain to you.
Demystifying The Working Principle of Pressure Sensor 1
Pressure sensor is the most commonly used sensor in industrial practice. It is widely used in various industrial self-control environments, involving water conservancy and hydropower, railway transportation, intelligent building, production automation, aerospace, military, petrochemical, oil well, electric power, ship, machine tool, pipelines and many other industries. And in different environments, different types of pressure sensors are needed to avoid errors. As a Gear Sensor Manufacturer, let‘s talk about how different pressure sensors work.
电子商城
品牌：MELEXIS
品类：Micropower & Omnipolar Hall Switch
价格：￥1.5051
现货： 5,000
品牌：MELEXIS
品类：Micropower & Omnipolar Hall Switch
价格：￥1.2269
现货： 3,795
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.2402
现货： 1,904
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥4.1188
现货： 255
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.2402
现货： 211
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.4897
现货： 182
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.4897
现货： 150
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.4897
现货： 150
品牌：MELEXIS
品类：High Speed Factory Trimmed Linear Hall IC
价格：￥5.4897
现货： 120
品牌：MELEXIS
品类：Micropower & Omnipolar Hall Switch
价格：￥1.5768
现货： 103
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论