What is the Difference Between Proximity Switch and Sensor?
What is the Difference Between Proximity Switch and Sensor? As a Hall IC Supplier, share with you.
1. Proximity switch is a type of switch sensor.
2. Sensors are mainly divided into three categories: switch sensors, analog sensors and digital sensors.
3. The output of the switch sensor is a switch signal with high and low level changes, which is generally used to detect the state, action, or position of the measured object. The signal output by the analog sensor is an analog signal of voltage or current that continuously changes with the measured physical quantity, and is generally used to detect the specific value of the physical quantity. Digital sensors usually process the measured analog signals to output digital data.
4. Switch sensors generally include proximity switches, photoelectric switches, and magnetic switches. Analog switches generally include temperature sensors, voltage sensors, pressure sensors, flow sensors, and so on.
Proximity sensors refer to devices with proximity sensing functions. Some of them can output analog signals, some can output digital signals through communication interfaces, and some can output simple switching signals, what you call a certain switch It is a kind of simple switch signal output.
China Gear Sensor
Therefore, the two are not exactly the same thing, but the relationship of inclusion.
For example, the pressure sensor you mentioned can output analog signals, which can obtain the actual pressure value; also output serial communication signals, which can also obtain the actual pressure value or judgment value; and output "1" or "0" Digital judgment signal; the simpler purely mechanical pressure switch is a two-wire "on" or "off" signal.
Generally, proximity switches or pressure switches use mechanical or pressure forces to sense or drive mechanical switches, while sensors sense the aforementioned forces, analyze and process them, and then output signals.
It can be understood that proximity switches, pressure switches, etc. output one or several digital quantities, and these digital values are done or set. The sensor output is generally an analog quantity, which is continuously output with the change of your distance or pressure within the rated range of the sensor. For example, the temperature sensor collection signal display can be continuously displayed in the range of X℃-Y℃, while the temperature switch is set to you. A signal is output at the set X℃, and no signal is output if the temperature is less than the set value.
Of course, everything is not absolute. The above is general, and it is not ruled out that there are more special product functions, which is not the case.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由莫子若转载自AHNJ AH Official Website，原文标题为:What is the Difference Between Proximity Switch and Sensor?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Brief Introduction of Wiegand Sensor
Wiegand sensors are used as a pulse generator in multiple applications. The sensor needs no external power source and has no moving parts. Instead, it exploits the properties of a small diameter wire invented by John Wiegand.
What is a Gear Sensor?
“Gear Position Sensor” to detect the shift position. Generally, a device called “transmission” is mounted on the vehicles such as motorcycles and cars, which run on the engine power. The transmission is the device which keeps rotating speed of the engine within proper range by the combination of the gears.
The Future Development Trend of Hall Sensor
Hall Sensor is the world‘s third-largest sensor product, which is widely used in industrial, automotive, computer, mobile and emerging consumer electronics. In the next few years, as more and more automotive electronics and industrial design companies move to China, Hall sensors‘ annual sales in the Chinese market will maintain a high growth rate of 20% to 30%. At the same time, the related technologies of Hall Effect Sensor are still being improved, and programmable Hall sensors, intelligent Hall sensors and micro Hall sensors will have better market prospects.
Wide Application of Zero Power Consumption Magnetic Sensor
The zero power consumption magnetic sensor is used for position inquiry, and the same size magnetic sensor provides a greater switching distance than an inductive sensor. Non-ferrous metal walls and aluminum walls do not affect their switching performance. This vibration-resistant sensor can be installed on the side or front use. The magnet can be flush mounted in the steel material and sensing the north and south poles. The zero power consumption magnetic sensor provides the best sensor model for each cylinder type.
How to Measurement Hall Effect Sensor?
While Hall Effect Sensors are mostly utilized to spot things and spaces, they can likewise be made use of for present dimension. As established at the beginning of this overview, the Hall Result is based on the connection in between electromagnetic fields and also currents, with the devices above making use of electromagnetic fields to develop currents as an outcome.
How to Prevent the Sensor from Getting Wet?
As a precise detection device, the sensor is troublesome if it is damp. The moisture of the sensor will affect its accuracy and stability, and it will cause serious damage. If the sensor is used in a more important place, the loss will be caused. It is very heavy. then how to prevent moisture? Hall Sensor Manufacturer to explain to you.
What Should you Know About Hall Sensors?
Hall sensor is the third-ranked sensor product in the world. It is widely used in industry, automobile industry, computers, mobile phones and emerging consumer electronics fields.
What is the Connection Method of the Hall Current Sensor?
Hall current sensors and voltage sensors only need to be connected to a positive and negative DC power supply. The measured current bus generally passes through the sensor or is connected to the primary side terminal, and then some simple connections are made on the secondary side to complete the main control circuit. Isolation detection, circuit design is very simple.
电子商城
品牌：MELEXIS
品类：Integrated Current Sensor IC
价格：￥15.3811
现货： 50,899
品牌：MELEXIS
品类：Triaxis Position Sensor IC
价格：￥22.8370
现货： 39,302
品牌：MELEXIS
品类：Integrated Current Sensor IC
价格：￥14.2165
现货： 25,181
现货市场
品牌：SILICON LABS
品类：Switch Hall Effect Magnetic Position Sensor
价格：￥2.2924
现货：126,000
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论