Stable, Low-Cost, and Highly Compatible Wireless Serial Communication Solution - High-Performance Wireless Serial Modules LoRa610Pro Suitable for Various Scenarios

时间： 2024-08-08 来源：G-NiceRF Official Website

技术问答

The LoRa610Pro is a wireless serial communication module from NiceRF. It uses advanced LoRa spread spectrum modulation and frequency hopping technology, resulting in high reception sensitivity and strong anti-interference capabilities. This module also enhances communication penetration and distance, offering significant advantages over traditional FSK and GFSK products.

High Reception Sensitivity

Thanks to the adoption of LoRa technology, the LoRa610Pro module boasts very high reception sensitivity, making it perform exceptionally well in long-distance communication and complex environments.

Strong Anti-Interference Capabilities

LoRa spread spectrum and frequency hopping technologies significantly enhance the module's anti-interference capabilities, ensuring stable and reliable data transmission even in noisy wireless environments.

All-in-One Customizable Software Design

The software design of the LoRa610Pro module features an all-in-one customizable mode. Users can configure the module via PC software, allowing them to switch between different operating modes, providing greater flexibility and adaptability.

Automatic Routing Function in MESH Mode

In MESH mode, the routing function of the LoRa610Pro module allows it to automatically route, forming a network with no blind spots and no distance limitations through the combination of multiple modules. This greatly expands the module's application range, making it suitable for scenarios requiring wide coverage and reliable transmission.

Single Module Transmission Distance of 5Km in Open Area @ Low Data Rate

At a low data rate, the transmission distance in an open area can reach up to 5 kilometers.

Data Encryption

Users can encrypt wireless data with AES128 encryption via PC software or serial commands, ensuring the security of data transmission. This high-level encryption technology prevents data from being intercepted and tampered with during transmission.

Flexible Configuration

The LoRa610Pro module allows users to easily configure various parameters via PC software, simplifying the setup and adjustment process to meet different application needs.

Hardware Features:

Built-in hardware anti-crash self-reset circuit to resist strong external interference signals.

Overcurrent, overvoltage, and reverse connection protection circuit.

Software Features:

AES128 data encryption.

LBT (Listen Before Talk).

Node/route/node+route optional in MESH mode

How to Choose the Right Parameters for a Wireless Serial Module? What are the Main Aspects to Consider?

Communication Frequency Bands

Common frequency bands for wireless serial modules include 170MHz, 230MHz, 315MHz, 433MHz, 490MHz, 780MHz, 868MHz, 915MHz, and 2.4GHz. NiceRF's modules generally operate in the 433/470/868/915 MHz bands, with other frequencies customizable depending on the module type.

Chip Selection

Different chips have different characteristics. Commonly used chips include Semtech's SX1276, SX1278, SX1280, and Silicon Labs' RF chips SI4463, SI4438, SI4432. Each of these chips has unique features, and modules using different chip solutions exhibit different characteristics in RF communication. Users can choose the appropriate chip based on their specific needs.

Communication Distance

Communication distance is one of the core parameters of wireless modules. We should choose the appropriate module based on the required communication distance.

Transmit Power and Receive Sensitivity

The LoRa610Pro High-Performance Wireless Serial Module is a high-power wireless communication module with a maximum output power of 100 mW (+20 dBm) and a sensitivity of -139 dBm. It has high receive sensitivity, allowing it to pick up weak signals and maintain stable communication over long distances and in complex environments.

Power Consumption

The power consumption of a wireless serial module includes transmission current, reception current, and sleep current. Low-power modules are more suitable for battery-powered applications, helping to extend the device's lifespan.

Air Data Rate

Select an air data rate that suits the application requirements. A high air data rate can achieve fast data transmission but may affect transmission distance, while a low data rate helps extend communication distance.

Network Topology Support

Select modules that support different network topologies (such as point-to-point, star, MESH, etc.) based on application requirements to enable flexible networking.

Serial communication is a widely used method of data transmission. What advantages does it have compared to other communication methods?

Simplicity

Serial communication requires only a simple serial interface to achieve data transmission between two devices. By changing the interface configuration, the data transmission speed can be adjusted.

Stability

Serial communication has strong stability and can achieve data transmission over long distances without being easily affected by external interference. This makes serial communication perform excellently in scenarios that require stable transmission.

Low Cost

Serial communication requires few specialized hardware devices, usually just a serial interface board, making it relatively low-cost.

Compatibility

As a mature communication method, serial communication is widely used and supported. Most computers and peripheral devices are equipped with serial interfaces, providing excellent compatibility.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由玄子转载自G-NiceRF Official Website，原文标题为:Stable, Low-Cost, and Highly Compatible Wireless Serial Communication Solution - High-Performance Wireless Serial Modules Suitable for Various Scenarios，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Ultra-Precise Positioning and Measurement with UWB650: Power and Accuracy for Diverse Wireless Applications

The UWB650 module is a wireless communication module launched by NiceRF, based on Ultra-Wide band (UWB) technology and compliant with the IEEE 802.15.4-2020 Standard. The UWB650 module is developed on the foundation of the UWB3000F27, enhancing the module with a 0.5W high-power amplifier chip.

产品发布时间 : 2024-08-29

G-NiceRF Launches New UWB650 Positioning Module with 1KM Communication Range, Achieving Transparent Transmission and Two-Way Ranging

UWB650 module, launched by G-NiceRF, is a wireless communication module based on UWB technology and compliant with the IEEE 802.15.4-2020 Standard protocol. It features a high-power 0.5W amplifier chip and achieves long-distance data communication, supports ESD static protection, and AES128 wireless encryption.

产品发布时间 : 2024-07-11

Lora610Pro组网无线数传模块通过巴西ANATEL认证，嵌入式小体积设计，输出功率100mW

LoRa610Pro模块是由思为无线最新推出的一款升级版组网无线数传模块，模块采用LoRa扩频调制跳频技术，具有-139 dBm 高效的接收灵敏度。相比当前通用的FSK和GFSK产品，LoRa610Pro模块具有更强的穿透能力、通信距离和抗干扰性。 Lora610Pro数传模块通过巴西ANATEL认证。

产品发布时间 : 2024-06-08

无线模块如何修改频率——以思为无线LoRa无线模块LoRa1262为例

频率是无线模块中最基础也是最核心的参数，所有的无线模块都是根据在频率基础上的来完成通讯的（只有频率一致才能完成通讯）。思为无线的无线模块主要分为两大类，一种是没有单片机控制的前端无线模块，需要通过代码来修改中心频率点，另外一种是有单片机的数传无线模块，可以通过思为无线自主研发的PC软件去配置无线模块的参数或者通过串口发送命令符来完成修改。

技术探讨发布时间 : 2024-07-08

G-NiceRF无线模块选型表

提供G-NiceRF 2.4G无线模块,3D计步模块,ANT+无线串口模块,ASK发射模块,ASK模块四件套,LORA无线模块,UWB双向测距定位模块,低功耗蓝牙模块,对讲机模块,全双工无线数据语音模块,数字无线音频收发模块,卫星定位模块,无线模块,无线射频模块,无线透传模块,无线音频收发模块产品选型，可多尺寸选择，最大工作频率达6489.6MHz/7987.2MHz

产品型号	品类	等级认证标准	尺寸(mm)	工作频率(MHz)	输出功率(mW、W)
LORA1276-C1-915MHZ	LORA无线模块	ROHS,IC,ID,FCC	16mmx16mm	915MHz	100mW

选型表 - G-NiceRF 立即选型

LoRa无线数传模块的常见问题与解决方法

本文G-NiceRF思为无线小编总结了LoRa无线数传模块的一些常见问题，方便用户在使用过程中如何正确的设置以及遇到问题时如何解决。

设计经验发布时间 : 2024-07-16

LoRa600Pro 产品规格书

型号- LORA PRO 系列,LORA600PRO-915,LORA600PRO-490,LORA600PRO-868,LORA600PRO-433,LORA PRO,LORA600PRO,LORA610PRO

数据手册 - G-NICERF - V2.0 - 2022-10 PDF 中文下载

What are the Advantages and Features of a Wireless Serial Module? How is a Wireless Serial Module Used?

SV651 is an Industrial class ＆ highly-integrated RF module. TTL / 232 /485 can be chosen corresponding to SV651-TTL / SV651-232 / SV651-485. SV651 has good sensitivity and 500mW output power to achieve long RF range and reliable RF communication. To avoid the interference, SV651 provides 40 frequency channels and configurable Net ID. SV651 is flexible but easy to use , it comes with many parameters, such as: frequency, data rate, output power, Net ID, Node ID. Users can configure the parameters through PC or customer’s own device.

技术探讨发布时间 : 2024-06-28

LoRa610Pro 100mW & Embeded & Industrail Mesh NetWork & AES128 Encryption Transparent Data Transmission Product Specification

型号- LORA610PRO-433,LORA610PRO-868,LORA610PRO-915,LORA610PRO-490,LORA610PRO

数据手册 - G-NICERF - V3.4 - 2021-7 PDF 英文下载

LoRa610PRO 100mW TTL电平接口抗干扰LoRa扩频自组网功能Listen Before Talk嵌入式小体积无线数传模块产品规格书

型号- LORA610PRO-433,LORA610PRO-868,LORA610PRO-915,LORA610PRO-490,LORA610PRO

数据手册 - G-NICERF - V3.4 - 2021-7 PDF 中文下载

LoRa610PRO产品规格书

型号- LORA610PRO-433,LORA610PRO-868,LORA610PRO-915,LORA610PRO-490,LORAPRO,LORA610PRO

数据手册 - G-NICERF - V4.1 - 2023-10 PDF 中文下载

G-NiceRF推出双天线串口无线组网模块LoRa600PRO，输出功率高达100mw

思为无线惊喜推出LoRa600PRO 100mw LoRa双天线串口无线组网模块，该模块基于Semtech公司的SX127X芯片而研发，采用了先进的LoRa扩频调制跳频技术，高效的接收灵敏度，使得其穿透能力和通信距离都远超当下通用的FSK和GFSK产品，并具有更强的抗干扰性。

产品发布时间 : 2024-06-20

Market Price and Development Prospects of LoRa Module

LoRa is very popular in the Internet of Things market because its long-distance communication technology has the advantages of low power consumption and low cost. The LoRa module developed based on the SX1276/SX1278 chip also shows a steady increase in demand. So, what is the market price of LoRa wireless module, and what is the future development trend of LoRa module?

技术探讨发布时间 : 2024-06-06