4G LTE Modem USR-G780 V2 Network AT Command Remote Modification of 4G LTE Modem Parameter Settings
In the wave of IIoT, 4g lte modem is a key component for connecting remote devices and data centers, and its stability and flexibility are crucial. USR-G780 V2, as a high-performance 4g lte modem device, not only supports multiple communication protocols and interfaces, but also has the advanced function of remotely modifying parameters through network AT commands. This function is particularly important for application scenarios that require frequent configuration adjustments or remote management. This article will explore how to use network AT commands to remotely modify the parameter settings of USR-G780 V2 4g lte modem, bringing unprecedented convenience and efficiency to traditional industries.
I. Overview of Network AT Commands
The network AT command is a method of sending control commands to the 4g lte modem through a network interface. It allows users to remotely query and set various parameters of the 4g lte modem without physical contact with the device. The network AT command format supported by the USR-G780 V2 is usually "command password + AT command", where the command password is used to verify the user's identity and ensure the legitimacy and security of the command.
II. Steps for Remotely Modifying 4g Lte Modem Parameters
1. Establish network connection: First, ensure that the USR-G780 V2 4g lte modem is connected to the Internet and has a valid IP address and port number. Also, set up a network debugging assistant or corresponding management software on the remote server to send and receive AT commands.
2.Send AT command: Send network AT commands to the USR-G780 V2 4g lte modem through a remote server. Taking the query of the 4g lte modem firmware version as an example, you can send the command "adminAT+VER?", where "admin" is the default command password and "AT+VER?" is the AT command to query the firmware version. Note that the end of the AT command must include a semicolon and a carriage return in English.
3.Receive response: After receiving the AT command, 4g lte modem will perform the corresponding operation and return the response information. For example, for the "adminAT+VER?" command, 4g lte modem will return its firmware version number as a response.
4.Modify 4g lte modem parameters: If you need to modify the parameters of the 4g lte modem, you can send the corresponding setting instructions. Taking the modification of the SOCKA parameter as an example, you can send the instruction "adminAT+SOCKA=TCP,clouddata.usr.cn,15000" to set the SOCKA communication protocol to TCP, the server address to clouddata.usr.cn, and the port number to 15000. Please note that the modified parameters usually need to be restarted by the 4g lte modem to take effect, so you need to send the "adminAT+Z" instruction to restart the device at the end.
III. Combination of Edge Computing and Parameter Optimization
During the process of remotely modifying 4g lte modem parameters, combining edge computing capabilities can further improve system performance and efficiency. For example, by deploying edge computing nodes on 4g lte modem, local preprocessing and analysis of data can be realized, reducing data transmission volume, lowering network latency, and protecting data privacy. At the same time, edge computing can also dynamically adjust 4g lte modem parameter settings based on real-time data to optimize network connectivity and data transmission efficiency.
IV. Application Scenario Examples
The USR-G780 V2 4g lte modem, with its ability to remotely modify parameters using network AT commands, plays an important role in multiple application scenarios. For example, in the field of intelligent manufacturing, it can achieve real-time monitoring and dynamic adjustment of production lines by remotely modifying 4g lte modem parameters; in the field of intelligent transportation, it can remotely adjust the parameters of traffic monitoring equipment to cope with different traffic conditions; in remote monitoring systems, it can modify the communication protocol and server address of 4g lte modem in real time to adapt to different network environments.
The USR-G780 V2 4g lte modem, with its ability to remotely modify parameters through the support of network AT commands, brings unprecedented convenience and flexibility to traditional industries. Whether it is querying device status, modifying communication parameters, or optimizing network connectivity, it can be easily achieved through the network. At the same time, combined with edge computing capabilities, it can further improve the performance and efficiency of the system, promoting the in-depth development and wide application of industrial IoT. As senior engineers in industrial IoT, we should actively master and apply these advanced technologies to contribute wisdom and strength to the digital transformation of traditional industries.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Vicky转载自usr Official Website,原文标题为:4G LTE MODEM USR-G780 V2 NETWORK AT COMMAND REMOTE MODIFICATION OF 4G LTE MODEM PARAMETER SETTINGS,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Industrial Modem Selection Guide: Precise Matching, Empowering Efficient IoT Communication
The selection of industrial Modem needs to consider factors such as communication protocol, transmission rate, interface type, working environment, and remote management requirements. By evaluating key technical indicators such as stability, reliability, data transmission efficiency, and compatibility, users can accurately match the most suitable Modem for their application needs. In addition, understanding the characteristics and application cases of different brands and models of Modem helps users make more informed selection decisions, thereby enabling efficient IoT communication.
设计经验 发布时间 : 2024-10-31
How to Update 4G Lte Modem
Updating the 4G LTE modem is an important part of ensuring the stable operation and sustainable development of the industrial IoT system. By following the article steps and precautions, the update of the 4G LTE modem can be completed safely and effectively. At the same time, it is also necessary to pay attention to the development of new technologies and trends, so as to carry out necessary upgrades and modifications for 4G LTE modems in a timely manner to meet changing business needs and technical requirements.
设计经验 发布时间 : 2024-09-19
Basic Features of 4G LTE modem
In recent years, the usage rate of 4G LTE modems is gradually increasing, and it covers a wide range of fields. Its main function is to transmit data to the cloud completely and transparently.
设计经验 发布时间 : 2023-08-13
有人物联网关/模组选型表
有人物联选型表如下参数:工作电压(V):3.0V-58V,工作电流(mA):22mA-170mA@5V/3.3V,工作温度(℃):-20℃ ~ +85℃,串口波特率(bps):300bps~1Mbps
产品型号
|
品类
|
工作电压(V)
|
工作电流(mA)
|
工作温度(℃)
|
USR-G776
|
网关
|
9V~36V
|
72mA@12V
|
-25℃- 75℃
|
选型表 - 有人物联 立即选型
Maximize Network Performance with 4G LTE Modem Advanced Automation Terminal
This artical introduces the working principle of 4G LTE modem, tells what equipment is the 4G LTE modem distribution automation terminal installed in. Then shows how to maximize network performance with 4G LTE modem advanced automation terminal.
原厂动态 发布时间 : 2023-10-11
【应用】有人物联工业级4G DTU G780 V2用于罐改管燃气管道远程监控,设有阻抗匹配电路
为积极推进各地罐改管燃气管道工作,有人物联有机嵌入软硬一体化物联技术、云计算、大数据等前沿技术,以有人物联工业级4G DTU G780 V2为感知与传输中枢构筑罐改管燃气管道远程监控方案,有效支撑管道燃气行业应用的创新升级,全面提升燃气管道的安全管控能力水平,全力保障居民的生命财产安全。
应用方案 发布时间 : 2023-04-18
PUSR Launched the Building Block Edge Gateway USR-M100, a Comprehensive and Scalable Data Transmission Gateway
PUSR launched the building block edge gateway USR-M100.M100 is a comprehensive and scalable data transmission gateway, which integrates the functions of Ethernet, 4G, transparent transmission, network IO, edge computing, MQTT and cloud platform fast access.
原厂动态 发布时间 : 2023-05-13
【应用】基于Cat-1的智能充电桩解决方案,支持5M上行链路速率和10M下行链路速率,网络稳定
Cat 1的远程更新功能可以远程升级充电桩控制系统以更新其功能并更快地修复错误。Cat 1可以自动检测充电桩的任何意外故障,并将故障及时上载到服务平台。该平台将积极致电附近的维修人员维护设备,并通过一键式操作帮助用户轻松支付费用。
应用方案 发布时间 : 2023-06-08
【应用】有人物联DTU蜂窝网络助力光伏发电联网应用方案,数据接口标准化,网络安全保障
光伏电站中,通过DTU实现联网远程监测,对多个层次的环节进行实时监控,光伏电站监控,远程控制、远程诊断、数据上传。通过工业标准RS485接口和MODBUS协议及设备自定义协议,采集光伏发电站发电量、输出功率、逆变器功率。监控环境温度、风速、光照强度等参数。
应用方案 发布时间 : 2023-06-22
有人物联(usr)M2M蜂窝调制解调器(DTU)选型指南
描述- The USR IOT industrial cellular modems have been designed to an industrial specification to allow an easy connection for remote devices over the internet. The USR IOT modems move away from the traditional approach of TCP/UDP connection built and maintenance using a set of AT commands which require a high skill level to implement correctly and reliably.
型号- USR-DR152,USR-DR150,USR-G786-AUX,USR-DR15X SERIES,USR-DR15X,USR-DR154,USR-G771-E,USR-MB706,USR-G771,WH-LTE-7S1,WH-LTE-7S1-E,USR-DR504,USR-G786-G,USR-G786-EUX,USR-G786,USR-DR502,USR-DR504-G,USR-DR504-EUX,USR-DR502-E,USR-DR504-AUX
CA T- 1 Modem is More Suitable for Which Scenarios Compared to 4G
In today‘s rapidly developing Internet of Things (IoT), choosing the right communication technology is key to ensuring efficient and stable operation of various networking applications. CAT- As a subset of 4G LTE technology, the ModemData Transfer Unit has shown a potential to be more adaptable than traditional 4G in specific scenarios due to its unique advantages. This article will delve into which industrial IoT scenarios CAT-1 Modem has more advantages compared to 4G technology.
技术探讨 发布时间 : 2024-08-27
4G LTE Modem and Remote Monitoring
The 4G LTE modem is the bridge between field data transmission and remote monitoring in the remote monitoring system, which is responsible for data acquisition, transmission, protocol conversion, and remote control. It is closely related to the remote monitoring system.
原厂动态 发布时间 : 2023-11-01
电子商城
服务
Ignion可支持多协议、宽频段的物联网天线方案设计,协议:Wi-Fi、Bluetooth、UWB、Lora、Zigbee、2G、3G、4G、5G、CBRS、GNSS、GSM、LTE-M、NB-IoT等,频段范围:400MHz~10600MHz。
最小起订量: 2500 提交需求>
提供电子电气产品的辐射骚扰测试、辐射抗干扰测试,以及RFID,SRD,2G,3G,4G等无线产品的辐射骚扰测试、辐射杂散测试、辐射功率测试以及辐射抗干扰测试。测试频率可覆盖9KHz-26.5GHz。
实验室地址: 深圳 提交需求>
登录 | 立即注册
提交评论