GreenWaves Technologies Produced a Prototype of a New Wireless Modem for the IoT
GREENWAVES Technologies just produced a prototype of a new wireless modem for the IoT.
It is implementing the GreenWaves LPWAN wireless modem dedicated to the high data rate LPWAN applications. This model includes a NUCLEO development board, a XILINX Zynq-7000 FPGA development board and an ATREB215-XPRO evaluation board instantiating an ATMEL AT86RF215 analog front-end.
The interface with the sensors and the board configuration are processed by the STM32 microprocessor on the NUCLEO board. The GreenOFDM digital modulation is implemented on the XILINX ZYNQ-7000 FPGA. The ATMEL AT86RF215 circuit is a full modem of the 802.15.4g standard from which GreenWaves only uses the OFDM front-end implementation. The GreenOFDM wireless modem running on the XILINX ZYNQ-7000 FPGA generates the IQ signals that are then sent via a serial link to the analog front-end of the ATMEL circuit.
This board prototype will allow GreenWaves Technologies to deploy high data rate low power communicating objects in an existing LPWAN network.
In a second phase, this board prototype will be integrated on one standalone board. It will be available to early adopters for prototyping communicating objects applications.
In a third phase, the FPGA will be replaced by an ASIC. This full GreenOFDM wireless modem will be manufactured and delivered to customers.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由莫子若转载自GREENWAVES Official Website，原文标题为:Our wireless modem prototype for IoT，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
ROHM Develops the Industry‘s Smallest* CMOS Op Amp Optimized for Smartphones and Compact IoT Devices
ROHM has developed an ultra-compact 1.8V - 5V, rail-to-rail CMOS operational amplifier (op amp) - the TLR377GYZ. It is optimized for amplifying signals from sensors such as temperature, pressure, flow rate, used in smartphones, small IoT devices, and similar applications.
GreenWaves Technologies Unveils GAP8 IoT Application Processor, Enabling Groundbreaking Embedded Artificial Intelligence at the Very Edge
GreenWaves Technologies Unveils GAP8 The Industry’s Lowest Power IoT Application Processor, Enabling Groundbreaking Embedded Artificial Intelligence at the Very Edge.
GAPPoc : A Family of GAP8-centric Proof Of Concept boards for Edge AI
Our GAP8 application processor chip is great at analyzing and understanding data from IoT sensors, from the simplest to the most complex, in a very tight power envelope – from a few tens of milliwatt in active mode down to a few microwatts in sleep mode.
Silicon Labs（芯科科技）传感器选型指南
目录- sensor Product Introdution OPTICAL SENSORS/RELATIVE HUMIDITY AND TEMPERATURE SENSORS/TEMPERATURE SENSORS SENSOR-PUCK sensor IoT system
型号- IRMFB-EK,SI 1146-A10-GMR,SI 1142-A11-GMR,SI1140DK,SI7054-EVB,SI 1143-A11-GMR,SI7013-A20*,SI 1147-A10 -GMR,SI7013USB-DONGLE,SI7020-A20,SI7021-A20,SI 1141-A11-YM0R,SI7050-A20,SI 1141-A11-GMR,SI7055-EVB,SI7053-EVB,UVIRSLIDER2EK,SI700X,SI7022-A20,SI 1143-A11-YM0R,SI7050-EVB,SI114X,SI7053-A20,SI7023-A20,SI7006-A20,SI7022-23-EVB,SI 1102-A-GMR,SI1102EK,SI 1142-A11-YM0R,SI1145-A10-GMR,SI7054-A20,SI705X,SI7006-07-EVB,SI1132,SI701X,SI 1132-A10-GMR,SI7007-A20,SLSTK3201A,SI7055-A20
TDK to Showcase the Power of Its Advanced Sensor Solutions at Sensors Converge 2024
TDK sensor solutions help further the company’s vision of transforming designs into reality. At TDK’s Sensors Converge booth, attendees can interact with innovations in sound, motion, pressure, and more. TDK technology will come to life in the form of Ribbit the Robot, an interactive roaming robot showcasing the broad spectrum of TDK technologies in a single use case. Ribbit will chat with participants about new possibilities for applications in IoT, robotics, automotive, and beyond.
GAP-8: A RISC-V SoC for AI at the Edge of the IoT
Current ultra-low power smart sensing edge devices, operating for years on small batteries, are limited to low-bandwidth sensors, such as temperature or pressure. Enabling the next generation of edge devices to process data from richer sensors such as image, video, audio, or multi-axial motion/vibration has huge application potential.
InvenSense Announces SensorStudio 2.3 Supporting Dataflow-Based Custom Sensors
InvenSense, Inc. announced the new SensorStudio 2.3 release. SensorStudio 2.3 is the latest reiteration of InvenSense‘s sensor prototyping and development platform for the Internet of Things (IoT). The support of custom sensors allows IoT developers a wider range of physical and virtual sensors.
【产品】Arduino兼容扩展板SensorShield-EVK-001，可轻松构建传感环境
ROHM开发出通过Arduino和mbed等开放平台通用微控制器开发，可轻松测量加速度、气压、地磁等8种信息的传感器扩展板（Expansion Board）SensorShield-EVK-001。将ROHM集团量产中的8种传感器分别在PCB板上实装并与开放平台连接板组成的套件。通过与在全球电子工具领域应用广泛的Arduino Uno等连接并嵌入软件，有助于大幅减少IoT设备的开发工时。
TDK Launches InvenSense Sensor Partner Program to Empower IoT innovation with Sensor Technology
This paper mainly introduces the information of TDK‘s InvenSense Sensor partner program to promote iot innovation through sensor technology, and introduces the ecological partners specific from controllers to chip introduction solutions
ElastiSense DS Sensor are Born IoT Ready
The Internet of things (IoT) describes devices with sensors, processing ability, software and other technologies that connect and exchange data with other devices and systems over the internet or other communications networks. A DS sensor mounted on a bridge, a building a hillside, a stamping machine, a mining train, an excavator, a packaging machine, a tank, or whatever structure, machine, or application you can imagine, basically just detects movement through influence on the sensor itself.
How to Using IoT in Smart Lighting (The Most Complete Guide for 2023 from Dusun)
This article introduces the three categories of smart lighting and the benefits of smart lighting using IoT, especially for related equipment manufacturers and managers.
ROHM Develops the Industry‘s Smallest CMOS Op Amp Optimized for Smartphones and Compact IoT Devices
ROHM has developed an ultra-compact 1.8V - 5V, rail-to-rail CMOS operational amplifier - the TLR377GYZ. It is optimized for amplifying signals from sensors such as temperature, pressure, flow rate, used in smartphones, small IoT devices, and similar applications.
ROHM Develops Ultra-Low-Power On-Device Learning Edge AI Chip，Enabling Real-time Failure Prediction Without Cloud Server Required
ROHM has developed an on-device learning AI chip for edge computer endpoints in the IoT field. It utilizes artificial intelligence to predict failures (predictive failure detection) in electronic devices equipped with motors and sensors in real time with ultra-low power consumption.
占用管理参考平台精确、匿名、电池供电的人员检测传感器
描述- 本资料介绍了LYNRED和GreenWaves Technologies共同开发的占用管理参考平台，该平台利用红外传感器和超低功耗处理器实现电池供电的人流检测。平台旨在解决办公空间利用率问题，提供准确、匿名的人员检测与计数功能，适用于会议室占用检测、共享空间管理等。
型号- GAP8
TELE IoT Sensor Meets 3D Reality
We all know about all sensors and electrical motors, pumps, gear boxes and drives getting connected to the cloud more and more. But many operators and maintenance members are desperately trying to tie a simple online dashboard or graph into what’s happening in the real world.
电子商城
现货市场
服务
可加工2-32层PCB/1-5阶HDI/FPC柔性线路板/Rigid-Flex Board软硬结合板，最小线宽线距:2mil；最小孔：3mil；铜厚:1-10OZ。
最小起订量： 1 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论