Experience in Selecting Self Recovering Fuses
Do you have any good experience to share in selecting self recovering fuses? Self recovery fuse is an overcurrent electronic protection component, which is made of high molecular weight organic polymers under high voltage, high temperature, and sulfurization reaction conditions, mixed with conductive particle materials, and processed through special processes.
The main function of a self-healing fuse is to provide overcurrent protection in electrical appliances. Therefore, self recovering fuses have parameters such as withstand voltage, withstand current, maintain current, and action time. Therefore, it is necessary to choose a suitable self recovery fuse based on the voltage, current, and protection current of the product used.
The selection method for selecting self recovering fuses is as follows:
1. determine the maximum ambient temperature, operating current, maximum operating voltage, required protection current, and action time parameters for the protected circuit to operate normally.
2. Choose the appropriate self recovery fuse or patch fuse based on the characteristics of the protected circuit or product.
3. Select a product series with a withstand voltage level greater than or equal to the maximum working voltage based on the maximum working voltage.
4. Based on the maximum operating temperature of the circuit and the operating current in the circuit, select the product specification that is suitable for maintaining the current by comparing the temperature reduction rate of the self recovery fuse.
5. Confirm whether the selected product meets the required action protection time based on the action time curve of the self recovery fuse of this model.
6. Compare the data provided in the specification sheet to confirm that the size of the self recovery fuse of this specification meets the requirements.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由莫子若转载自XC Official Website,原文标题为:Experience in selecting self recovering fuses,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
What is A Self Recovery Fuse
Self recovery fuse is an overcurrent electronic protection component that uses a polymer organic polymer under high pressure, high temperature, and sulfurization reaction conditions.After mixing with conductive particle materials, it is processed through a special process. Habitually applying PPTC (Polymer Positive Temperature).
设计经验 发布时间 : 2023-12-05
Selection Guide of Self Recovery Fuse
Self recovery fuses are widely used for overcurrent protection of power lines, communication lines, and I/O ports in electronic products such as communication, security, industrial, automotive, and consumer products. So, in actual circuit protection, how should we choose the appropriate model of self recovery fuse to achieve the best protection effect?
设计经验 发布时间 : 2023-12-21
How to Choose a Patch Fuse?
Chip fuses are mainly used in electronic products such as digital cameras, laptops, and mobile phones. From traditional glass tube fuses to micro fuses and chip fuses, the focus of their selection is slightly different due to differences in product technology.
设计经验 发布时间 : 2023-11-20
Professional Knowledge of Self-healing Fuses
The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.
技术探讨 发布时间 : 2023-11-30
Explanation of Parameters in the PPTC Specification for Self Healing Fuses
This is very simple. As long as you know the meaning represented by the parameters in the specification book, you can clearly and quickly view the PTC specification book for self recovery fuses.
技术探讨 发布时间 : 2024-08-21
Principle and Characteristics of Self Recovering Fuses
As a new type of overcurrent protection component, self recovering fuses have the advantages of self recovery, fast response speed, and small size, and have broad application prospects in electronic devices and circuits.
技术探讨 发布时间 : 2024-09-30
SMD fuse and Chip Fuse Specifications
SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.
技术探讨 发布时间 : 2023-12-04
Self Recovery Performance and Working Process of Self Recovery Fuses
Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.
技术探讨 发布时间 : 2023-12-15
Self Healing Fuses, a New Type of Overcurrent Protection Component
Self recovery fuse is a new type of overcurrent protection component with unique performance and wide application prospects.
技术探讨 发布时间 : 2024-09-28
Self Recovery Fuse Specification, Must Understand
Each type of circuit protection component has specifications, and self recovery fuses are no exception. So, what do you think when holding a self-healing fuse specification book? To put it bluntly, when reading the specifications, the main focus is on the parameters and the meanings they represent.
技术探讨 发布时间 : 2023-12-02
Introduction of Surface Mount Fuses
Surface mount fuse is a widely used protective component in electronic circuits. Patch fuses are compact in size and typically flat in shape. This compact structure gives it a unique advantage in the trend of miniaturization in modern electronic devices, effectively saving space on circuit boards.
技术探讨 发布时间 : 2024-09-26
Surface Mount Fuse, a Widely Used Protective Component in Electronic Circuits
Surface mount fuse is a widely used protective component in electronic circuits. Structurally speaking, patch fuses are compact in size and typically flat in shape. They are designed to be suitable for surface mount technology (SMT) and can be easily installed on printed circuit boards (PCBs).
技术探讨 发布时间 : 2024-09-26
What are the Types of Glass Tube Fuses
What are the types of Glass Tube Fuses?
技术探讨 发布时间 : 2023-11-29
The Application of Self Recovery Fuses in RS485 Interface
As is well known, the interface of intelligent instruments was originally RS232, which can achieve point-to-point communication, but this method cannot achieve networking function. The subsequent RS485 resolved this issue. So the current RS485 interface is quite popular among intelligent instruments. Today, the editor will explain the application of self recovery fuses in the RS485 interface.
应用方案 发布时间 : 2024-01-31
Description of Metal Materials for Self Recovering Fuses
PPTC self-healing fuses play a role in limiting current and achieving circuit protection. There are various specifications and models of self-healing fuses. This article introduces the metal materials used for Self Recovering Fuses.
技术探讨 发布时间 : 2024-09-10
电子商城
登录 | 立即注册
提交评论