The Correct Steps for Selecting a Self Recovering Fuse Model

时间： 2024-08-31 来源：XC Official Website

技术问答

选型帮助

研发客服

商务客服

self recovering fuse,fuse,resettable fuse,旭程

1. Determine the following parameters of the self recovering fuse circuit:

● Maximum working environment temperature

● Standard operating current

Maximum operating voltage (maximum)

Maximum fault current (Imax)

2. Choose a resettable fuse that can adapt to the highest ambient temperature and standard operating current of the circuit.

Use the table below and select the temperature that best matches the highest ambient temperature of the circuit.

Browse this column to find values equal to or greater than the standard operating current of the circuit.

3. Compare the maximum electrical rating of the selected component with the maximum operating voltage and fault current of the circuit.

Use electrical characteristics to verify whether the components selected in Step 2 will use the circuit's maximum operating voltage and fault current.

Check the maximum operating voltage and maximum fault current of the equipment.

Ensure that Umax and Imax are greater than or equal to the circuit's maximum operating voltage and maximum fault current.

4. Determine the operation time

The action time is required to switch the component to a high resistance state when a fault current occurs throughout the entire device.

In order to provide the expected protection function, it is important to clarify the working time of the resettable fuse.

If the selected component moves too quickly, abnormal or harmful operations may occur.

If the component moves too slowly, the protected component may be damaged before switching to a high resistance state.

Use the typical working time curve at 25℃ to determine whether the working time of a resettable fuse is too fast or too slow for the circuit.

If so, please return to step 2 and reselect the backup component.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由Natalia转载自XC Official Website，原文标题为:The correct steps for selecting a self recovering fuse model，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Calculation Method for Melt Current of Fuse Fuses

The current of a fuse includes two aspects, one is the rated current of the fuse tube, and the other is the rated current of the melt, which cannot be confused.

设计经验发布时间 : 2023-11-24

The Installation Precautions for Current Fuses

The installation of current fuses is crucial for ensuring the safety and proper functioning of electrical circuits. Here are some important installation precautions to keep in mind.

设计经验发布时间 : 2024-11-04

Solution to Fuse Failure

XC shares about Solution to Fuse Failure.

设计经验发布时间 : 2023-12-29

旭程（XC）保险丝选型指南

目录- Company Profile Fuse User's Manual Fuse Auto Fuse Fuse Holder Thermostat

型号- 06F,3S,C0015302Z,C0040302Z,3T,10C,06T,C0060303Z,4F,KSD9700,C0030301Z,6CH,C7500301Z,4T,C0015301Z,C0070303Z,4TE,C0040303Z,8TE,C0025302Z,5C,KSD305,5F,5G,C4000302Z,5H,9L,KSD301,C2000302Z,C0030302Z,10FV,C0020301Z,5S,C7500302Z,5T,C0010302Z,24F,12F,32F,C0080303Z,5SH,6B,6C,C0025301Z,6F,6G,24T,6H,12T,C3000301Z,C4000301Z,C5000301Z,2F,C2000301Z,C0030303Z,32T,R3-13,5GH,R3-12,R3-11,5CH,6S,C0020302Z,6T,2T,5TE,XC-1,BS1362,C0010301Z,C3000302Z,5TR,3F,3G,C5000302Z,C1000302Z,XC-2,C0050303Z,C0035302Z,C0020303Z

选型指南 - 旭程 - Ver.1.0 - 2022/2/16 PDF 英文下载

The Impact of Fuse Aging on Usage

After the fuse ages, there is no danger of generating the current that should be cut off and the fuse not blowing. The aging of a fuse is equivalent to a decrease in the rated value (current) rather than an increase, resulting in the circuit being cut off at a small overload current or pulse.

技术探讨发布时间 : 2023-12-16

Several Factors Influence the Lifetime of Current Fuses

The lifetime of a current fuse is influenced by several factors. Firstly, the current rating of the fuse plays a crucial role. If a fuse is constantly operating near or at its rated current, it will experience more heat buildup and stress over time, which can shorten its lifetime.

技术探讨发布时间 : 2024-11-06

Professional Knowledge of Self-healing Fuses

The operating principle of a self-healing fuse is a dynamic balance of energy. The current flowing through the self-healing fuse generates a certain amount of heat due to the thermal effect of the current (self-healing fuses all have resistance values), and the generated heat is completely or partially dissipated into the environment. The heat that is not dissipated will increase the temperature of the self-healing fuse components. The temperature during normal operation is relatively low, and the heat generated and dissipated reaches a balance.

技术探讨发布时间 : 2023-11-30

SMD fuse and Chip Fuse Specifications

SMD fuses can be divided into SMD disposable fuses and SMD self recovery fuses. Among them, the specifications of patch disposable fuses include series 060312062410 fuses, and the specifications and dimensions of patch self recovery fuses include series 0603, 0805, 1206, 1210, 1812, 2920, etc.

技术探讨发布时间 : 2023-12-04

Self Recovery Performance and Working Process of Self Recovery Fuses

Traditional fuses are installed in circuits. When an overcurrent occurs due to a fault or abnormality in the circuit, the fuse itself melts to cut off the current and protect the circuit. However, due to the fact that traditional fuses can only protect once and need to be replaced if burned out, some products still cannot resume operation after troubleshooting or abnormal overcurrent disappears. As a new type of overcurrent protection device, the self-recovery fuse has the function of automatic recovery, which can meet the performance requirements of similar applications.

技术探讨发布时间 : 2023-12-15

Principle of Resettable Current Fuses

Resettable current fuses offer a unique solution for protecting electrical circuits while providing the convenience of being reusable. Here‘s how they work.

技术探讨发布时间 : 2024-10-31

5TE 系列 12A/300方型塑胶保险丝（环保产品）产品承认书（5TE SERIES 12A/300V 5TE SUB-MINIATURE FUSE-LINK(GREEN PRODUCT) SPECIFICATION FOR APPROVAL）

型号- 5TE,5TE SERIES,5TE 系列,011.212060001

数据手册 - 旭程 - 版本1.0（REV.1.0） - 23.9.7 PDF 中英文下载

High-Speed Fusing Chip Fuses Play A Crucial Role in Protecting Electronic Circuits

High-speed fusing chip fuses play a crucial role in protecting electronic circuits. These fuses are designed to quickly interrupt the flow of current in the event of an overcurrent or short circuit, preventing damage to sensitive electronic components.

技术探讨发布时间 : 2024-10-23

The Operating Principle of Self Recovering Fuse PPTC in USB Protection

Self healing fuse (PPTC) is a very important electronic component widely used in the protection of USB interfaces. It has the characteristics of automatic protection and automatic recovery. When the current exceeds the set value, the circuit will be immediately cut off, and when the current returns to the normal range, the path will be automatically restored.

技术探讨发布时间 : 2024-08-29

Selection of Fuse Type

Select the type of fuse based on the electrical load characteristics in the circuit (slow melting or fast melting fuse). Fuses can be divided into slow fuse and fast fuse according to their different fusing characteristics. Fast melting fuses are commonly used in resistive circuits to protect components that are particularly sensitive to current fluctuations； Slow melting fuses are commonly used to quickly disconnect circuits when there is a fault with a large surge current when the circuit status changes.

设计经验发布时间 : 2024-01-09

Guide to Current Fuse Selection

Selecting the appropriate current fuse is crucial for the safety and efficient operation of an electrical system. Firstly, one must consider the rated current of the circuit. The rated current of the fuse should be slightly higher than the normal operating current of the circuit. For example, if a circuit typically operates at 5 amperes, a fuse with a rated current of around 5 - 7 amperes might be suitable. However, it should not be too high, as this may lead to a situation where the fuse does not blow when it should during an overload or short - circuit.

器件选型发布时间 : 2024-10-16