Laird Thermal Systems Introduces 5000 Watt Heat Exchanger for Industrial Applications
The LA5000 Series recirculating liquid-to-air heat exchanger offers improved thermal performance maximizing system uptime.
June 6, 2022 – Laird Thermal Systems has expanded its line of water heat exchangers with the introduction of the LA5000 Liquid Cooling System. As a water heat exchanger, the 5000-watt unit offers dependable compact performance while removing large amounts of heat from a liquid circuit. Designed to maximize system uptime, the LA5000 heat exchanger is ideal for immersion cooling and bulk heat removal in particle accelerators, linear accelerators, cyclotrons, semiconductor fabrication equipment, medical X-ray, and industrial X-ray scanners.
The LA5000 is designed to operate above ambient temperatures, eliminating the threat of condensation. The system operates full-time, continually monitoring system liquid levels and notifying users of preventative maintenance to avoid costly failure. A dedicated tank prevents air entrapment within the liquid, stopping air bubbles from getting drawn into the liquid and damaging the pump. The added instrumentation results in a more robust design, and with proper care and maintenance, users can expect over 10,000 hours of continuous, maintenance-free operation.
For improved thermal performance, the LA5000 cooling system uses a higher-performing heat exchanger and a more efficient fan, reducing operating noise and the temperature difference between the liquid and the air by a factor of 2. Coolant is recirculated using a high-pressure pump to ensure maximum flow rate over a wide operating range. Heat from the coolant is dissipated to the surrounding environment using a heat exchanger and fan. Compared to standard liquid chillers that operate below ambient temperatures, the LA5000 liquid cooling system operates above ambient temperatures, at a lower cost. The robust yet compact system is UL Recognized by IEC standards.
“The high reliability and simplicity of this cooling system make it an ideal selection for many industrial applications in need of cooling”, says Greg Ducharme, Product Director at Laird Thermal Systems. “At one fourth of the cost of a liquid chiller, you would be hard-pressed to find a system this small and quiet that is capable of this high thermal performance.”
- |
- +1 赞 0
- 收藏
- 评论 0
本文由JWM转载自Laird Thermal Systems Official Website，原文标题为:Laird Thermal Systems Introduces 5000 Watt Heat Exchanger for Industrial Applications，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Laird Thermal Systems Launches the SuperCool X Series with Next-Gen Thermoelectric Cooling Technology
Laird Thermal Systems has launched a new high-performance thermoelectric cooler assembly series that utilizes next-generation thermoelectric coolers with advanced semiconductor materials. This enhancement boosts cooling performance by up to 10% over previous models.
【产品】5000W水热交换器LA5000系列，使用更高性能的热交换器和更高效的风扇，是冷却工业应用的理想选择
莱尔德热系统推出LA5000液冷系统，扩展了其水热交换器产品线。这款5000W的水热交换器紧凑且性能可靠，可以从液体回路中带走大量的热量。LA5000热交换器旨在最大化系统的正常运行时间。
The Nextreme™ Performance Chiller Series from Laird Thermal Systems Offers Reliable Temperature Control for Laboratory Equipment
Modern lab equipment is getting smaller and more efficient, with chillers like the Nextreme series providing precise temperature control for various applications. These chillers are compact, portable, use eco-friendly refrigerants, and meet global safety standards, helping labs save costs, space, and ensure reliable results.
Laird Thermal Systems（莱尔德热系统）液体冷却系统产品选型指南
目录- Introduction Benefits & Applications of Liquid Cooling Systems Nextreme™ Recirculating Chillers Liquid Heat Exchangers Custom Liquid Cooling Systems Featured Application: Medical Imaging
型号- 1510.00,WL1500,385901-001,VRC2400,VRC4500,NRC5000,WL3004,387008451,1550.00,LA5000,WL1000,385911-015,1520.00,387009925,OW4002,385910-043,387010178,387010179,NRC2400,1505.00,38701 0181,1264.00,1155.00,1104.00,VRC1200,WW5001,387002779,NRC400,WW3001,1515.00,WL500,WL2000,387005774,387005598,OL4503,385912-029,NRC1200,385910-015
莱尔德热系统推出新一代5000W液体-空气水热交换器LA5000，可延长浸入式冷却系统的正常运行时间
莱尔德热系统公司的LA5000是一种5000W的液体-空气水热交换器，其设计工作温度略高于环境温度，能够为系统冷凝器提供极好的冷水来源，因此是浸入式冷却应用的理想选择。
莱尔德热力系统应用笔记：培养箱的加热和冷却
描述- 本资料主要讨论了孵化器腔室的加热和冷却技术，特别是针对细胞和组织培养的实验室和医院环境。资料强调了精确控制温度、湿度和气体浓度对于细胞培养的重要性，并探讨了传统冷却系统（如水套和压缩机）的局限性。资料介绍了热电技术作为替代方案的优势，包括高效、环保和紧凑的设计。此外，还详细介绍了Laird Thermal Systems提供的热电冷却器、模块和温度控制器，以及它们在孵化器设计中的应用。
型号- SAAX-175-24-22,PR-59,SDAX-220-24-02,SR-54,SLAX-215-24-02
Laird Thermal Systems（莱尔德热系统）热电冷却器选型指南（英文）
型号- 430478-502,HTX20-31-F2A-0909-11-W2.25,64979-501,CP085-127-06-L1-W4.5,UTX15-24-F2-5252-TA-W6,CP14-31-10-L1-W4.5,ETX7-3-F1-2020-TA-RT-W6,9360001-301,7050045-502,71061-504,ETX14-12-F1-6262-TA-W6,PCX SERIES,UTX6-24-F1-5555-TA-W6,HTX15-31-F2A-0909-TB-W2.25,PCX7-156-F2-1672-TA-RT-W6,387008429,SH08-28-05-L1-W4.5,PCX6-12-F1-4040-TA-RT-W6,CP14-71-10-L1-W4.5,ULTRATEC™ UTX SERIES,PCX8-12-F1-4040-TA-W6,9340006-301,71092-501,ETX4-7-F1-2323-TA-W6,PCX7-16-F1-4040-TA-W6,ETX15-28-F2-5252-TA-RT-W6,387008431,CP14-127-10-L1-W4.5,387007103,CP14-35-045-L1-W4.5,430705-503,ETX4-7-F2-3030-TA-RT-W6,387007106,387007227,387007108,HTX12-65-F2A-1312-TB-RT-W2.25,OPTOTEC™ HTX,430874-503,71062-514,387007231,CP08-63-06-L1-W4.5,387007112,387007113,9350004-301,387007115,430052-501,387007117,MS5-257-10-15-11-W8,ETX2.5-12-F1-3030-TA-RT-W6,CP08-127-05-L1-W4.5,PCX10-223-F1-3172-TA-RT-W6,CP14-127-045-L1-W4.5,HITEMP ETX SERIES,430922-501,387007120,387007123,387007122,9320002-301,MS3-119-20-15-11-W8,ETX11-12-F1-4040-TA-RT-W6,MS SERIES,56760-505,ETX15-12-F2-4040-TA-RT-W6,MS2-192-14-20-11-18-11-W8,ETX6-12-F1-4040-TA-RT-W6,56590-502,SH10-23-06-L1-W4.5,71036-505,56610-502,MS4-108-10-20-11-W8,ETX4-12-F1-3030-TA-W6,430027-501,PCX12-248-F1-5040-TA-RT-W6,PT4-7-F2-3030-TA-W6,430848-502,OTX12-65-F2A-1312-11-W2.25,430848-504,PCX8-7-F2-3030-TA-RT-W6,MS2-068-14-14-15-15-11-W8,CP14-71-045-L1-W4.5,PCX,OTX20-66-F0-1211-11-W2.25,PCX4-6-F1-2040-TA-RT-W6,HTX,PCX5-16-F1-4040-TA-W6,56430-501,OTX19-23-F1N-0608-11-W2.25,HTX SERIES,UTX9-28-F2-4040-TA-W6,PCX15-7-F1-4040-TA-RT-W6,PT4-12-F2-3030-TA-W6,CP12-161-04-L1-W4.5,16506-302,430875-503,PCX8-6-F1-2040-TA-RT-W6,ETX4-3-F1-2020-TA-RT-W6,43280-503,66100-501,66156-505,71063-505,44440-501,71020-505,56550-501,MS3-052-10-17-11-W8,387004692,387005660,71012-506,SH10-125-05-L1-W4.5,387005662,ETX2.3-4-F1-1919-TA-RT-W6,ETX5-6-F1-2040-TA-RT-W6,387005663,ETX4-12-F2-4040-TA-RT-W6,387005664,387004697,387005665,387005667,387005669,OTX12-66-F0-1211-11-W2.25,430097-507,ETX2.6-12-F1-2525-TA-W6,PCX9-3-F2-2525-TB-RT-W6,387005671,387005672,MS2-102-22-22-17-17-11-W8,387005673,387005674,387005676,387005677,387005678,387005679,387005318,CP10-254-06-L1-W4.5,ETX9-3-F2-2525-TA-W6,CP10-71-05-L1-W4.5,430026-503,430511-504,56910-502,OTX20-66-F0-1211-11-EP-W2.25,387005681,387006650,56995-501,387006891,387005683,CP10-31-05-L1-W4.5,ETX6-19-F1-4040-TA-RT-W6,387006893,387005685,387005686,387006534,387006897,HTX15-30-F2A-0610-11-W2.25,OTX12-65-F2A-1312-TB-W2.25,RH14-14-06-L1-W4.5,ETX2-12-F2-3030-TA-W6,PCX8-6-F1-3518-TA-RT-W6,MS2-102-14-14-17-17-11-W8,387006784,UTX15-288-F2-5252-TA-W6,387005696,387006544,387005698,387005699,ETX4-12-F1-4040-TA-RT-W6,SH14-125-10-L1-W4.5,CP14-71-06-L1-W4.5,9340001-301,HTX12-18-F2A-0606-11-RT-W2.25,ETX,387006791,387006795,CP2-127-10-L1-W4.5,387006798,63604-511,CP14-199-06-L1-W4.5,PCX6-24-F1-5555-TA-RT-W6,OTX20-65-F2A-1312-11-W2.25,PCX5.6-19-F1N-3030-TA-RT-W6,ETX15-24-F2-5252-TA-W6,MS3-231-10-15-11-W8,SH14-125-045-L1-W4.5,62910-510,POWERCYCLING PCX,387005354,PCX24-128-F2-5555-TA-RT-W6,HTX15-65-F2A-1312-TB-W2.25,POWERCYCLING PCX SERIES,CP10-131-04-L1-TOW-W4.5,OTX08-18-F0-0505-11-W2.25,HTX12-18-F2A-0606-GG-W2.25,CP14-199-045-L1-W4.5,CP2-71-06-L1-W4.5,ETX4-6-F2-2143-TA-RT-W6,OTX20-68-F1A-1313-11-W2.25,71212-502,OPTOTEC™ OTX SERIES,CP SERIES,CP2-31-06-L1-W4.5,63595-501,POLARTEC™ PT SERIES,PCX4-4-F1-1515-TA-RT-W6,ETX8-12-F2-2525-TA-RT-W6,HTX12-65-F2A-1312-11-W2.25,OTX08-31-F1-0707-11-RT-W2.25,PT8-12-F2-4040-TA-W6,ETX4-12-F2-3030-TA-RT-W6,CP10-71-06-L1-W4.5,OTX08-66-F0-1009-11-RT-W2.25,CP14-17-10-L1-W4.5,ETX11-12-F2-3030-TA-RT-W6,ETX3-3-F2-1518-TA-W6,PCX4-7-F1-2020-TA-RT-W6,387004970,MS2-190-10-10-12-12-11-W8,387005700,CP10-127-06-L1-W4.5,ETX2.5-12-F1-4040-TA-RT-W6,9340002-301,MS2-065-04-04-11-11-11-W4,71049-501,9350007-301,POLARTEC™ PT,387006926,PT4-12-F2-4040-TA-W6,387006928,387006927,PCX11-12-F2-3030-TA-RT-W6,RH14-32-06-L1-W4.5,MS2-051-22-25-22-25-11-W8,ETX14-3-F1-3030-TA-RT-W6,MS4-115-14-15-11-W8,PCX8-176-F2-7528-TA-RT-W6,SH14-15-06-L-W4.5,PCX7.5-13-F1-4023-TA-RT-W6,OTX15-68-F1A-1313-11-W2.25,CP2-127-06-L1-W4.5,ETX6-7-F2-3030-TA-RT-W6,OTX08-08-F0-0303-11-W2.25,PCX6-28-F2-4040-TA-RT-W6,44530-501,MS2-049-10-10-15-15-11-W8,16503-310,475010-313,ETX3-48-F1-1212-GG-W6,UTX8-288-F2-5252-TA-W6,ETX2.6-6-F1-1225-TA-W6,UTX6-19-F1-4040-TA-W6,430436-504,OPTOTEC™ OTX,387006832,387006834,387006836,387006837,9350006-301,387006839,HTX20-65-F2A-1312-11-W2.25,9380001-301,MS3-070-20-25-11-W8,9340003-301,MS2-192-14-20-15-25-11-W8,MS4-129-10-15-11-W8,PCX2-12-F1-3030-TA-RT-W6,ETX2-6-F1-1225-TA-RT-W6,ETX4-3-F1-1515-TA-RT-W6,387005513,387006845,387005514,387005515,387006847,387005516,ETX25-12-F1-6262-TA-W6,ETX1.6-12-F2-3030-TA-RT-W6,OTX12-66-F0-1211-TB-RT-W2.25,430023-507,9350001-301,HITEMP ETX,387004679,57180-501,CP10-63-06-L1-W4.5,71035-505,PCX4-139-F1-1850-TA-RT-W6,ETX SERIES,UTX8-12-F2-2525-TA-W6,430474-501,MS2-107-10-10-12-12-11-W8,ETX8-12-F1-4040-TA-RT-W6,UTX11-12-F2-3030-TA-W6,387004680,ETX6-3-F1-2020-TA-RT-W6,OTX SERIES,387004685,387005659,PCX15-128-F
试剂储存莱尔德热系统的热电冷却器组件应用笔记
描述- 本文介绍了热电制冷组件在试剂储存中的应用。阐述了试剂储存对温度控制的重要性，分析了传统制冷方式和热电制冷的优势，并详细介绍了Laird Thermal Systems的热电制冷解决方案，包括SuperCool X系列、PowerCool系列和Tunnel系列，以及其特点和应用。此外，还强调了热电制冷组件在精确温度控制、节能、环保等方面的优势。
型号- SLA-400,SR-54 SERIES,SR-54
WL1500 WL系列液体冷却系统
描述- WL1500是一款可靠的液体到空气热交换器，通过高效循环冷却液来移除大量热量。它采用高压泵确保最大流量，并通过辐射式换热器和风扇将热量散发到环境中。该设备包含空气和水过滤器以保持最佳性能，并提供手动调节功能控制液体电路的压力和流量。
型号- WL1500,WL SERIES
冷冻离心机的帕尔贴冷却莱尔德热系统应用笔记
描述- 本文介绍了在离心机中应用Peltier冷却技术以实现精确温度控制的重要性。文章讨论了实验室离心机在热管理方面面临的挑战，如温度稳定性、空间限制、噪音水平、振动和制冷剂限制。Peltier冷却器因其高效、节能和可靠性而被推荐作为解决方案。文章详细介绍了Peltier冷却器的工作原理、规格和Laird Thermal Systems提供的具体产品系列，如Ceramic Plate (CP) Series和Tunnel Series、SuperCool X Series。此外，还讨论了与温度控制器结合使用Peltier冷却系统带来的优势，包括精确的温度控制和低噪音操作。最后，文章强调了Laird Thermal Systems在提供制冷解决方案方面的经验和专业知识。
型号- PR-59,SR-54 SERIES,SR-54
Common Coolant Types and Their Uses in Liquid Cooling Systems
This paper mainly introduces the common coolant types of Laird thermal system and its application in liquid cooling system, and analyzes the advantages and disadvantages of specific applications
Laird Thermal Systems的新一代热交换器可为数据中心的浸没式冷却提供经济的全时运行
描述- Laird Thermal Systems推出新一代LA5000热交换器，专为数据中心沉浸式冷却系统设计。该热交换器可高效散热，降低运营成本，提高能源效率。通过监测系统液体水平、流量和温度，LA5000确保系统稳定运行，减少维护成本。沉浸式冷却利用热交换器将热量传递到冷却液体中，实现高效散热，同时降低能耗。
型号- LA5000
Laird Thermal Systems Produces a Wide Array of Thermoelectric Coolers, Assemblies and Temperature Controller Combinations Optimized for Incubator Chambers
Laird Thermal Systems introduces thermoelectric solutions for incubator chambers, emphasizing precise temperature control without refrigerants. The HiTemp ETX Series and SuperCool X Series provide efficient heating and cooling, crucial for cell culture in labs. These systems offer a compact, reliable, and low-maintenance alternative to traditional incubator thermal management.
医疗激光冷却用热电冷却器和组件
描述- 本文介绍了热电制冷器和组件在医疗激光冷却应用中的作用。文章阐述了医疗激光器产生的热量及其对性能的影响，并强调了散热的重要性。文中详细说明了热电制冷器的原理、特点和应用，包括Laird Thermal Systems的CP系列和UltraTEC™ UTX系列产品。此外，还讨论了热电制冷器组件的设计和优势，特别是针对医疗激光应用的Tunnel、PowerCool和SuperCool X系列产品的特点和配置。最后，总结了热电制冷器和组件作为稳定医疗激光系统温度的理想解决方案的优势。
型号- SLA-400
Laird Thermal Systems Offers Thermoelectric Coolers, Thermoelectric Cooler Assemblies and Temperature Controllers for Refrigerated Centrifuges
Centrifuges are crucial for separating mixtures in medical and food processing labs. They face thermal challenges like temperature stability and noise levels. Thermoelectric coolers, like those from Laird Thermal Systems, offer an efficient and reliable solution for precise temperature control in centrifuges, reducing power consumption and maintenance costs. Laird‘s CP Series and temperature controllers provide stable cooling capacities and accurate control, making them ideal for various centrifuge applications.
电子商城
服务
使用FloTHERM和Smart CFD软件，提供前期热仿真模拟、结构设计调整建议、中期样品测试和后期生产供应的一站式服务，热仿真技术团队专业指导。
实验室地址： 深圳 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论