FTDI’s FT232H, FT2232H and FT4232H Can Be Integrated into 5g Network Devices
5G Network devices can use FTDI CHIPs for configuration, debugging or interfacing with other hardware components. During the manufacturing process of devices that incorporate 5G technology, FTDI chips can be used for configuration, testing and debugging purposes.
A 5G Beamformer is one typical example of utilizing FTDI technology to interface with other hardware components.
A 5G beamformer technology improves the efficiency and performance of data transmission. Beamforming is a signal processing technique that focuses radio frequency (RF) energy in a specific direction, creating a concentrated beam of wireless signals. This targeted approach enhances the reliability and speed of communication between the transmitter (such as a base station) and the receiver (such as a mobile device).
5G beamforming is achieved through the use of multiple antennas at both the transmitter and receiver ends. The beamformer adjusts the phase and amplitude of the signals sent or received by each antenna, directing the signal in a specific direction and minimizing interference from other directions. This targeted transmission helps overcome obstacles, reduce signal degradation and improve overall network performance.
5G beamforming plays a crucial role in optimizing the performance of 5G networks, contributing to the increased speed, reliability and efficiency of wireless communication.
FTDI’s FT232H, FT2232H and FT4232H allow for programming 5G beamformers which are interfaced as SPI slave devices. These FTDI device uses the MPSSE engine to configure them as an SPI master with the following maximum number of slaves:
FT232H => One MPSSE engine/SPI master, up to five SPI chip selects
FT2232H / FT4232H => Two MPSSE engines/SPI master, up to five SPI chip selects for each MPSSE interface, so maximum up to ten SPI chip selects
Selecting FT2232H would give a maximum of ten SPI chip selects to interface to 5G beamformers for programming/configuration.
FTDI FT2232H IC has the following key features making it an ideal candidate for this application:
• Entire USB protocol handled on the chip. No USB specific firmware programming required
• USB 2.0 High Speed (480Mbits/second) and Full Speed (12Mbits/second) compatible
• Dual Multi-Protocol Synchronous Serial Engine (MPSSE) to simplify synchronous serial protocol (USB to SPI) design
• FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases
• Highly integrated design includes +1.8V LDO regulator for VCORE, integrated POR function and on chip clock multiplier PLL (12MHz – 480MHz)
• Operational configuration mode and USB Description strings configurable in external EEPROM over the USB interface
• Configurable I/O drive strength (4,8,12 or 16mA) and slew rate
• Low operating and USB suspend current
• Supports bus powered, self-powered and high-power bus powered USB configurations
• UHCI/OHCI/EHCI host controller compatible
• USB Bulk data transfer mode (512byte packets in Hi-Speed mode)
• +1.8V (chip core) and +3.3V I/O interfacing (+5V Tolerant)
• Extended -40℃ to 85℃ industrial operating temperature range
• Compact 64-LD Lead Free LQFP/LQFN package and 56-LD VQFN packages
• +3.3V single supply operating voltage range
The Multi-Protocol Synchronous Serial Engine (MPSSE) can be configured and controlled by application software running on the PC. FTDI provides a library for this (LibMPSSE) or it can also be done using the D2xx drivers direct.
The block diagram shows how FTDI’s FT2232H can be integrated into this typical application.
Multiple FT2232H ICs could be used by integrating a USB hub (Note FTDI do not manufacture USB Hub ICs).
There are many 5G beamformer ICs available on the market from the likes of Analog Devices, NXP, TI and other IC manufacturers who specialise in this technology.
Recommended ICs:
FT232HL/Q
FT2232HL/Q/56Q
FT4232HL/Q/56Q
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Ray转载自FTDI CHIP Official Website,原文标题为:5G Network,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
FTDI FT2232H USB转SPI用于5G网络波束形成器,可配置I/O驱动强度(4、8、12或16mA)和转换速率
5G网络设备可以使用FTDI芯片进行配置、调试或与其他硬件组件交互。在采用5G技术的设备的制造过程中,FTDI芯片可用于配置、测试和调试目的。5G波束形成器是利用FTDI技术与其他硬件组件交互的一个典型示例。5G波束成形技术可提高数据传输的效率和性能。波束成形是一种信号处理技术,可将射频(RF)能量聚焦到特定方向,从而形成集中的无线信号波束。
FTDI的USB至JTAG芯片用于FPGA编程,兼容USB2.0高速480Mbits/秒和全速12Mbits/秒
FPGA板用于需要灵活性、速度和并行处理能力的各种应用。它们通常用于电信、汽车、航空航天、机器人、信号处理等领域。FPGA板可实现快速原型设计、硬件加速和自定义逻辑设计的实施,无需定制硅片制造。它们为用户提供了一个平台,可根据其特定需求开发和部署自定义数字电路和算法。FTDI产品可以集成到FPGA板中,以便通过其JTAG接口进行FPGAEVB板编程。
FTDI车规级USB接口芯片FT4232用于电动汽车充电器,兼容USB 2.0高速(480Mbits/秒)
将USB充电功能与电动汽车充电站相结合可以为用户提供更多便利和实用性,尤其是在用户需要等待电动汽车充电的情况下。FT4232H可用于电动汽车充电站,收集电动汽车站各种传感器的数据,并通过LTE和WIFI发送状态报告。
FTDI CHIP的USB桥接系列产品选型表
通用串行总线 (USB) 现在已成为可靠,低成本数字链路与系统连接的接口。 USB的使用已经扩展到PC之外,现在可以在各种区隔市场中找到,包括工业,医疗,消费,通信,网络等等。 FTDI芯片能够让设计人员快速实现USB设计,提供全面的解决方案包括硅片,开发工具,应用笔记和软件支持。 凭借着USB桥接器的专业技术为各种接口(如 UART, FIFO, I2C, SPI, PWM 和 GPIO) 提供了无缝集成,桥接器将信号和协议从所选的接口转换为USB。提供多样的USB解决方案, 最小至3x3mm的10的DFN引脚封装形式,或模块形式可以直接插入主板进行开发和生产, 再或者用于USB桥接至众多接口的线缆。
产品型号
|
品类
|
速率(Mbit/kBit)
|
通道数量
|
接口
|
I/O 电压(V)
|
USB Host
|
封装
|
描述
|
FT232HPQ
|
USB高速PD IC
|
12MBit/s (UART) up to 40MBit/s (Sync FIFO)
|
1
|
UART, FIFO, 1 x MPSSE, Fast serial, CPU FIFO, Bit Bang/GPIO, FT1248
|
3.3V
|
No
|
QFN 56
|
单通道高速USB Type-C转多用途UART/FIFO/JTAG/SPI/I2C,带单PD端口
|
选型表 - FTDI CHIP 立即选型
FT2232H双通道高速USB转多用途UART/FIFO IC
描述- FT2232H是一款由Future Technology Devices International Ltd(FTDI)生产的第五代高速USB到多用途UART/FIFO集成电路。该芯片支持USB 2.0高速(480Mb/s)和全速(12Mbits/Second),具有双通道UART或FIFO或MPSSE接口,可配置为多种行业标准串行或并行接口。
型号- FT232,FT245,FT2232,FT2232H-56Q,FT2232H-56Q-XXXX,FT222H,93C46,93C56,93C66,FT2232D,FT2232H,FT2232HL,FT2232HL-XXXX,FT2232HQ-XXXX,FT2232HQ,FT4232H-56Q
FT2232H双高速USB到多用途UART/FIFO IC数据表
描述- FT2232H是一款由Future Technology Devices International Ltd(FTDI)生产的第五代高速USB到多用途UART/FIFO集成电路。该芯片支持USB 2.0高速(480 Mb/s)和全速(12 Mbits/Second)模式,具有双通道UART/FIFO或MPSSE(多协议同步串行引擎)配置选项,适用于多种串行或并行接口标准。
型号- FT2232H,RS422,RS232,RS485,FT2232HL-XXXX,FT2232H-56Q-XXXX,FT2232HQ-XXXX
Future Technology Devices International Ltd FT233HP/FT232HP(带Type-C/PD3.0控制器的高速USB桥)数据表
描述- 本资料介绍了FT233HP/FT232HP高速USB桥接器,具有Type-C/PD3.0控制器。该产品支持高达60W的USB PD和/或Type-C端口供电,适用于多种应用,包括USB桥接、USB仪器、USB工业控制、USB EPOS控制、USB MP3播放器接口等。资料还提供了驱动支持、引脚配置、功能描述、电气特性等信息。
型号- FT232HPQ,FT233HPQ,FT233HPQ-TRAY,FT232HPQ-TRAY,FT232HL,FT232HP,FT232HPQ-REEL,FT233HPQ-REEL,FT233H,FT233HP,FT232H,FT232HQ
FT4232H四通道高速USB转多用途UART/MPSSE IC
描述- FT4232H是一款由Future Technology Devices International Ltd(FTDI)生产的第五代高速USB到多用途UART/MPSSE集成电路。该芯片支持四个UART接口,其中两个可独立配置为MPSSE引擎,用于模拟JTAG、SPI、I2C等同步串行模式。FT4232H具有高度集成的设计,包括+1.8V LDO稳压器和集成POR功能,并具备多种配置选项。
型号- FT4232,FT4232H,FT232,FT4232H-56Q-XXXX,FT24232H,93LC56,FT4232HL-XXXX,93LC46,FT4232HQ,FT2232,93LC66,93C46,74HC595,93C56,93C66,FT232B,FT2232H,FT4232HQ-XXXX,FT4232H-56Q
FT232H单通道高速USB到多用途UART/FIFO IC数据表
描述- 这份资料详细介绍了FT232H单通道高速USB到多用途UART/FIFO集成电路的特性和应用。FT232H是一款高度集成的USB转串行接口芯片,支持多种通信协议,适用于多种应用场景,包括USB仪器、工业控制、EPOS控制、JTAG、MP3播放器接口、闪存卡读写器、SPI、I2C等。
型号- FT232HL,FT232HL -XXXX,FT232H,FT232HQ-XXXX,FT232HQ
USB解决方案USB桥接解决方案专家
型号- FT600Q,USB-RS485-WE-1800-BT,USB-RS422-WE-1800-BT,FT232H,FT234XD,USB-RS232-WE-1800-BT_0.0,TTL-232R-3V3-WE,FT230XQ,FT260Q,FT230XS,FT260S,FT232RQ,USB-RS485-WE-5000-BT,FT601,FT600,VNC2,FT200XD,US232R-10,C232HD-EDHSP-0,FT4232H-56Q,FT4232H,TTL-232R-5V,TTL-234X-5V-AJ,FT2232H-56Q,FT602Q,C232HD-DDHSP-0,FT60X,TTL-232R-3V3-2MM,USB-RS232-WE-5000-BT_0.0,FT2232H-56,FT2232H,USB-RS232-WE-1800-BT_3.3,TTL-234X-3V3,FT601Q,FT232RNQ,TTL-232R-3V3,USB-RS422-WE-5000-BT,USB-RS232-WE-5000-BT_5.0,US232R-500,TTL-232R-3V3-AJ,US232R-100,FT2232HL,VINCO,UMFT311EV,TTL-232RG-VSW5V-WE,FT232RNL,FT2232HP,UT232R-200,TTL-234X-3V3-AJ,FT245RQ,FT4222H,FT4233HP,TTL-232RG-VSW3V3-WE,UMFT4222H,TTL-232RG-VREG1V8-WE,FT120,FT602Q-B,CHIPI-X10,FT245RNL,FT233HP,TTL-232R-5V-AJ,TTL-232RG-VREG3V3-WE,TTL-232RG-VIP-WE,UT232R-500,FT245RNQ,FT245RL,FT221XS,FT240XQ,FT2233HP,FT221XQ,FT240XS,FT4232HP,FT201XS,TTL-234X-3V3-WVE,TTL-234X-3V3-2MM,TTL-232R-5V-WVE,C232HM-EDHSL-0,FT312D,FT4232HA,FT4232H-56,USB-RS232-WE-1800-BT_5.0,FT231XQ,TTL-234X-5V-WVE,FT4232HL,FT231XS,FT232RL,FT260,FT232HL,TTL-234X-5V,FT232HP,FT600 SERIES,USB-RS232-WE-5000-BT_3.3,FT311D,FT220XQ,C232HM-DDHSL-0,FT120T,FT201XQ,FT220XS
FT4232H四通道高速USB至多用途UART/MPSSE IC规格书
描述- FT4232H是一款由FTDI公司生产的第五代USB设备,具备高速USB 2.0接口,支持四通道UART/MPSSE接口。该芯片具有独立的波特率发生器,支持RS232/RS422/RS485 UART传输速率高达12 Mbaud,并具备多协议同步串行引擎,可用于JTAG、SPI、I2C等应用。
型号- FT4232H,FT4232H-56Q-XXXX,FT4232HL-XXXX,FT4232HQ,FT4232HQ-XXXX,FT4232HL,FT4232H-56Q
FTDI Chip USB方案 USB 桥接解决方案专家
描述- FTDI Chip 提供全面的 USB 解决方案,包括芯片、开发工具、应用笔记和软件支持。其产品涵盖 USB 桥接器、模块、电缆等,支持多种接口和操作系统。FTDI Chip 的解决方案旨在缩短设计时间,提高系统性能,并提供强大的系统实现。
型号- FT311,FT600Q,USB-RS232-WE-5000-BT5.0,USB-RS485-WE-1800-BT,USB-RS422-WE-1800-BT,FT232H,FT234XD,UMFT602A-B,USB-RS232-WE-1800-BT_0.0,USB-RS232-WE-1800-BT 3.3,TTL-232R-3V3-WE,TLL-232R-5V,FT230XQ,FT260Q,FT230XS,FT260S,FT232RQ,USB-RS485-WE-5000-BT,TIL-232R-3V3,FT4222,FT601,FT600,UMFT12XEV,LTC4053,TLL-232RGVIP-WE,C232HD-DDHSP-O,VNC2,FT200XD,US232R-10,C232HM-EDHSL-O,C232HD-EDHSP-0,FT231X,FT4232H-56Q,V2DIP1-48,UMFTXXXXB*,FT4232H,TTL-232R-5V,D89,FT2232H-56Q,LC231X,FT602Q,C232HD-DDHSP-0,FT60X,TTL-232R-3V3-2MM,USB-RS232-WE-5000-BT_0.0,FT2232H-56,FT2232H,TIL-232R-3V3-VE,USB-RS232-WE-1800-BT_3.3,F T4232HL,UMFTXXXXA*,TTL-234X-3V3,FT601Q,FT232RNQ,T200XD,V2DIP1-32,UMFT260EV1A,TIL-234X-5V-AJ,TTL-232R-3V3,USB-RS422-WE-5000-BT,USB-RS232-WE-5000-BT_5.0,US232R-500,VNC2-48Q,TTL-232R-3V3-AJ,US232R-100,VNC2-48L,UM245R,VINCO,FT2232HL,FT600 系列,UMFT311EV,TTL-232RG-VSW5V-WE,FT232RNL,FT2232HP,TTL-234X-3V3-AJ,UT232R-200,FT245RQ,TTL-234X-3V3-WE,FT4222H,FT4233HP,USB-RS232-WE-5000-BT3.3,UM232H,TTL-232RG-VSW3V3-WE,UMFT4222H,TTL-232RG-VREG1V8-WE,TIL-232RG-VSW5V-WE,V2DIP2-32,UM232R,USB-RS232-WE-1800-BT5.0,UMFT600A,TIL-232R-5V-WE,FT602Q-B,CHIPI-X10,UB232R,FT245RNL,FT233HP,TTL-234-3V3,TTL-232R-5V-AJ,TTL-232RG-VREG3V3-WE,TTL-232RG-VIP-WE,US232R-200,UT232R-500,FT245RNQ,MM232R,FT245RL,FT221XS,FT240XQ,FT2233HP,TTL-234X-5V-WE,FT221XQ,FT240XS,UMFT120DC,FT4232HP,FT201XS,UMFT231XC,USB-RS232-WE-5000-BT0.0,EVAL232R,UMFT601X,TTL-234X-3V3-2MM,TTL-232R-5V-WE,UMFT602X-B,C232HM-EDHSL-0,FT312D,C232HD-EDHSP-O,FT4232HA,FT4232H-56,USB-RS232-WE-1800-BT_5.0,FT231XQ,UM232H-B,FT4232HL,FT231XS,FT232RL,FT260,FT232HL,UMFTXXXXE*,TTL-234X-5V,UMFT600X,FT232HP,LC234X,USB-RS232-WE-5000-BT_3.3,VNC2-32L,UMFTPD3A,FT311D,FT220XQ,C232HM-DDHSL-0,FT120T,FT201XQ,UMFT4222EV,FT220XS,V2DIP2-48,UMFT601A
FTDI USB接口用于家庭自动化系统中的无线产品,单通道同步FIFO模式,传输速度高达40MB/秒
家庭自动化系统通常会集成无线扩展来增强其功能和灵活性。这些扩展可以包括各种设备和技术,可以控制和自动化家庭环境的不同方面。无线传感器用于检测各种环境条件,如温度、湿度、运动、光线等。它们与家庭自动化系统进行无线通信,使用户能够根据传感器数据监控和自动响应。
FTDI‘s FT230XQ USB to UART IC Can Be Used in Car Diagnostics Devices
This paper mainly introduces the application of FTDI‘s FT23xXQ/D ICs in Car Diagnostics Device, and introduces the application advantages and block diagram of the chip
FTDI示例IC PCB封装技术说明
型号- FT245RQ,FT601Q-B,FT600Q,FT245BL,FT4233HPQ,FT234XD,FT233HPQ,FT51A,FT230XQ,FT260Q,VNC2-48L1C,FT311D-32L1C,FT312D-32L1C,VNC2-48L1B,FT230XS,FT260S,FT232RQ,VNC2-32Q1B,VNC1L-1A,FT122,FT602Q-B,FT121,FT4222HQ,FT4232HPQ,FT602,FT245RNL,FT232BL,FT232HPQ,FT200XD,FT245RNQ,FT245RL,FT240XQ,FT221XS,FT221XQ,FT4232H-56Q,FT240XS,FT201XS,FT4232HQ,FT2232H-56Q,FT602Q,FT2233HPQ,FT2232D,VNC2-48Q1C,VNC2-48Q1B,FT231XQ,FT311D-32Q1C,FT4232HL,FT312D-32Q1C,FT231XS,FT232RL,FT600Q-B,FT313HQ,VNC2-32L1B,FT232HL,FT232RNQ,FT601Q,FT232HQ,FT2232HPQ,FT220XQ,FT4232HAQ,FT2232HL,FT313HL,FT120T,FT232RNL,FT201XQ,VNC2-64,FT313HP,FT2232HQ,FT220XS
电子商城
品牌:FTDI CHIP
品类:Quad High-Speed USB to MultiPurpose UART/MPSSE IC
价格:
现货: 0
品牌:FTDI CHIP
品类:Dual High Speed USB to Multipurpose FIFO IC
价格:¥38.3669
现货: 160
品牌:FTDI CHIP
品类:Automotive grade Quad High Speed USB to Multi-purpose MPSSE IC
价格:¥69.4046
现货: 0
品牌:FTDI CHIP
品类:Dual High Speed USB to Multipurpose FIFO IC
价格:¥38.3669
现货: 0
品牌:FTDI CHIP
品类:Quad High-Speed USB to MultiPurpose MPSSE IC
价格:¥46.7289
现货: 0
品牌:FTDI CHIP
品类:Single Channel HiSpeed USB to Multipurpose FIFO IC
价格:¥34.2006
现货: 0
品牌:FTDI CHIP
品类:Quad High-Speed USB to MultiPurpose MPSSE IC
价格:¥229.5124
现货: 0
品牌:MELEXIS
品类:Programmable Linear Hall Effect Sensor
价格:¥20.6808
现货: 22,334
品牌:NISSHINBO
品类:High voltage CMOS-based protection ICs
价格:¥0.4750
现货: 10,500
现货市场
登录 | 立即注册
提交评论