Advanced Battery Energy Storage Systems (BESS) Solutions: Parker Chomerics 6.0W/m-K THERM-A-FORM CIP 60

2024-10-10 PARKER CHOMERICS Official Website
two-component dispensable thermal gap filler,two-component (2k) dispensable thermal gap filler,cure-in-place material,two-component dispensable material two-component dispensable thermal gap filler,two-component (2k) dispensable thermal gap filler,cure-in-place material,two-component dispensable material two-component dispensable thermal gap filler,two-component (2k) dispensable thermal gap filler,cure-in-place material,two-component dispensable material two-component dispensable thermal gap filler,two-component (2k) dispensable thermal gap filler,cure-in-place material,two-component dispensable material

From large-scale institutions to individual residencies, battery energy storage systems (BESS) are becoming more and more prevalent. These battery systems, which store electrical energy in batteries for future use, provide a critical way to ensure auxiliary or backup power and may offer portable backup battery storage. 



There are three common BESS tiers:

Grid-level storage encompasses applications such as large-scale solar panels, wind farms, and hydroelectric power. Energy is created and then stored at co-located energy storage units until it is distributed based on demand. 


Commercial-level storage covers any business or agency that maintains backup power sources to ensure continuity in the case of blackouts or other power failures. Hospitals are an especially important example of this category, as the life-saving care provided to patients must continue regardless of external circumstances. 


Residential level storage applies to any home that is storing the excess electrical energy created from sources such as solar panels. 


Regardless of their location, these storage systems share common thermal management challenges that impact the batteries themselves as well as the supporting power electronics, motors and rotors. Similar to the batteries found in electric vehicles, these systems generate a lot of heat that must be proactively managed in order to mitigate the likelihood of system failure or safety risks. 


Introducing THERM-A-FORM CIP 60

To meet the specific needs of these applications, PARKER CHOMERICS is proud to introduce THERM-A-FORM CIP 60, a two-component (2k) dispensable thermal gap filler and cure-in-place material with 6.0 W/m-K thermal conductivity. With a Shore 00 hardness of 50 at full cure, it is designed to be an alternative to hard-curing dispensable materials. Lower hardness means that CIP 60 can serve as a vibration dampening agent and also simplify the reworking process. 



As a two-component dispensable material, THERM-A-FORM CIP 60 has an excellent flow rate and can be dispensed in high volumes or used to fill in applications that require heat transfer in challenging geometries. Another advantage of two-component materials is they prevent silicone oil bleed due to their snap cure characteristics. CIP 60 is designed to minimize silicone oil migration that may impact the aesthetics or manufacturing processes of electronics assemblies within BESS modules. 


With a 1:1 mix ratio and packaged in cartridges of various sizes, THERM-A-FORM CIP 60 two-component dispensable thermal gap filler can be easily dispensed through a static mixing tip using either manual or automated dispensing equipment, making it advantageous to the assembly processes associated with thermal gap pads. The dispensable formulation makes THERM-A-FORM CIP 60 very well-suited to automated assemblies, from desktop prototyping all the way to large-format, high-volume dispensing.


Committed to Customer Success

Parker Chomerics offers global manufacturing with localized support, offering applications engineering support, manufacturing, sales, and distribution in North America, Europe and Asia. Tapping into our global applications footprint, we are able to have local applications teams help with design, technical support, and dispensing optimization to improve product assembly and increase manufacturing throughput. 


From product design to manufacturing, Parker Chomerics is committed to helping our customers with products and services that help them solve modern engineering challenges. 

授权代理商:世强先进(深圳)科技股份有限公司
技术资料,数据手册,3D模型库,原理图,PCB封装文件,选型指南来源平台:世强硬创平台www.sekorm.com
现货商城,价格查询,交期查询,订货,现货采购,在线购买,样品申请渠道:世强硬创平台电子商城www.sekorm.com/supply/
概念,方案,设计,选型,BOM优化,FAE技术支持,样品,加工定制,测试,量产供应服务提供:世强硬创平台www.sekorm.com
集成电路,电子元件,电子材料,电气自动化,电机,仪器全品类供应:世强硬创平台www.sekorm.com
  • +1 赞 0
  • 收藏
  • 评论 0

本文由Vicky转载自PARKER CHOMERICS Official Website,原文标题为:Advanced Battery Energy Storage Systems (BESS) Solutions: THERM-A-FORM CIP 60,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。

相关研发服务和供应服务

评论

   |   

提交评论

全部评论(0

暂无评论

相关推荐

【应用】Parker Chomerics双面背胶导热粘接带T412用于结构粘接TEC与散热片,无需机械紧固件

某仪表芯片发热量稍大,需要用到TEC制冷导热和散热片散热,散热片选定的是爱美达的709203B00400G,外轮廓尺寸为10*10*10mm。因固定空间有限,无法使用螺柱压紧,也没有相应的设备和工艺焊接或使用导热粘接胶。这种情况下,推荐Parker Chomerics(派克固美丽)的双面背胶的导热粘接带。双面导热粘合带能够极好地将电子部件和散热片粘合起来,不再需要使用机械紧固件,价格便宜。

2021-04-28 -  应用方案 代理服务 技术支持 采购服务

Nextron‘s 350A ​Battery Energy Storage Systems (BESSs) Connector for Advanced Solutions

Nextron provides meticulously designed components to enhance connectivity within BESSs. Nextron‘s solutions cover critical aspects of energy storage, featuring a versatile modular design that scales from industrial to residential applications.

2023-11-08 -  应用方案 代理服务 技术支持 采购服务

【应用】如何正确规范地喷涂Parker Chomerics导电涂料

大多数Parker Chomerics导电涂料由相对低粘度涂料溶液中的片状或粉末状金属颗粒组成。 因此,在混合和使用时必须特别注意防止金属颗粒沉淀在涂料溶液中。从大容量(> 1升)的容器施加的涂料需要机械搅拌,即涂料容器中的气动混合器。混合涂料•将涂料罐放在涂料搅拌器上3-4分钟,或用大刮刀手工混合,直到所有固体都是均匀的悬浮液,才能很好地混合导电涂料。确保容器的底部或侧面没有未混合的材料。

2019-03-28 -  应用方案 代理服务 技术支持 采购服务

Parker Chomerics THERM-A-FORM CIP 60: 6.0W/m-K Dispensable Thermal Cure-in-Place and Gap Filler Material

Parker Chomerics THERM-A-FORM CIP 60 is a two-component (2k) dispensable thermal gap filler and cure-in-place material with 6.0 W/m-K thermal conductivity. CIP 60 is designed to be an alternative to hard-curing dispensable materials but also an provide an improvement over standard application methods associated with thermal gap filler pads.

2024-10-11 -  产品 代理服务 技术支持 采购服务

THERM-A-FORM™ T64x and 164x Series Cure-in-Place Potting and Underfill Materials

描述- THERM-A-FORM™ T64x 和 164x 系列是一种热导硅橡胶弹性体产品,用于电子冷却应用中的散热。这些材料可现场浇注并固化,适用于多高度组件的PCB冷却,具有高热传导性、灵活性和易用性。

型号- T64X,T647,T646,65-00-T642-0250,T644,T642,65-00-T646-0045,65-01-1641-0000,65-00-T646-0200,65-00-1641-0000,65-00-T644-0045,65-00-T644-0200,65-00-T647-0200,65-00-T647-0045,65-00-T642-0035,THERM-A-FORM™ T644,THERM-A-FORM™ T646,THERM-A-FORM™ T647,THERM-A-FORM™ T64X,THERM-A-FORM™ 164X,1642,1641,THERM-A-FORM™ T642,THERM-A-FORM™ 1641,THERM-A-FORM™ 1642,164X,65-00-1642-0000

PARKER CHOMERICS  - 数据手册 代理服务 技术支持 采购服务 查看更多版本

THERM-A-FORMTM CIP 30 3.2 W/M-K可分配的现场热固化和填隙材料

描述- Parker Chomerics推出的THERM-A-FORM CIP 30是一种双组分(2k)可抛弃式热间隙填充和现场固化材料,具有3.2 W/m-K的热导率。该产品旨在作为硬质固化材料的替代品,同时提供比标准热间隙填充垫更优的应用方法。它具有良好的流动性,适用于高速灌装或复杂几何形状的加热传输应用。

型号- 65-00-CIP30-0200,65-00-CIP30-0045,65-00-CIP30-0400,CIP 30

October 2023  - PARKER CHOMERICS  - 数据手册 代理服务 技术支持 采购服务

Therm-A-Form™现场固化灌封和底部填充材料

描述- THERM-A-FORM™热导硅橡胶系列产品是一种可现场固化灌封和填充材料,适用于电子冷却应用。该产品具有高热传导率、柔韧性和易用性,可用于间隙填充、灌封、密封和封装。

型号- T647,T646,65-00-T642-0250,T644,T642,65-00-T646-0045,65-01-1641-0000,65-00-T646-0200,65-00-1641-0000,65-00-T644-0045,65-00-T644-0200,65-00-CIP35-1200,65-00-T647-0200,65-00-T647-0045,65-00-T642-0035,CIP 35,THERM-A-FORM™ T64X SERIES,THERM-A-FORM™ T64X,THERM-A-FORM™ 164X,1642,1641,65-5P-CIP35-10452,65-1P-CIP35-5600,65-00-CIP35-0200,THERM-A-FORM™ 164X SERIES,65-00-CIP35-0045,65-00-1642-0000,65-00-CIP35-0400

2020/1/28  - PARKER CHOMERICS  - 数据手册 代理服务 技术支持 采购服务

Therm-A-Form™CIP35导热原位固化化合物

描述- Parker Chomerics推出的THERM-A-FORM™ CIP35是一种热导率高达3.5W/m-K的热传导硅橡胶弹性体,适用于敏感冷却应用。该材料可手工或机器人喷涂,固化后形成复杂几何形状,用于电路板(PCB)上多高度组件的散热,无需额外模具片成本。CIP35提供多种规格和配置,具有高热导率、柔韧性、易用性等优点。

型号- THERM-A-FORM™ CIP35,65-5P-CIP35-10452,THERM-A-FORM CIP35,65-1P-CIP35-5600,65-00-CIP35-0200,65-00-CIP35-0045,65-00-CIP35-1200,CIP35,65-00-CIP35-0400

12/8/18  - PARKER CHOMERICS  - 数据手册 代理服务 技术支持 采购服务

热界面材料分配指南

描述- 本资料由Chomerics提供,主要介绍了热界面材料(TIM)的dispensing(施涂)指南。内容涵盖了Therm-A-Gap™ GELs、Therm-A-Form™ Cure-In-Place Compounds和其他可施涂热传导材料的特点、应用、存储条件、选择合适的施涂设备和材料、施涂模式与工艺考虑因素、表面润湿性以及特殊材料考虑等方面。资料旨在帮助用户选择合适的热界面材料,优化施涂过程,提高电子产品的热管理性能。

型号- T636,GEL30,T647,T635,T646,GEL8010,T644,T642,1087,6W-XX-YYYYYY-ZZZZ,1086,GEL30G,T630G,1642,1641,T630,T652,T650,T660,T670

January 19, 2014  - PARKER CHOMERICS  - 用户指南 代理服务 技术支持 采购服务

Parker Chomerics(派克固美丽)T647G双组份固化胶数据手册

描述- T647G:Thermal-A-Form High performance Cure-in-Place Potting and Underfill material.

型号- THERM-A-FORM™ T647G,69-11-33497-T647G,T647G

PARKER CHOMERICS  - 数据手册 代理服务 技术支持 采购服务

Parker Chomerics(派克固美丽)Tecknit EMI 屏蔽材料选型指南

目录- Company Profile and Products introduction    Electromagnetic Compatibility Overview    EMI SHIELDING DESIGN Special Applications    Knitted Wire Mesh    Metal Fibers and Screens    Oriented Wires    Conductive Elastomer    EMI Shielding Windows    Air Vent Panels    Conductive Systems Products    Shielding Components    Beryllium Copper Gaskets    Fabric-over-Foam Gaskets    EMI Shielding Products Glossary and Appendix   

型号- 82-12916,21-13910,82-12911,21-13911,21-13912,60-02010,21-13913,60-02011,21-13914,60-02012,21-13915,60-02013,21-13916,60-02014,21-13917,60-02015,21-13918,60-02005,88-12342,60-02006,60-02007,60-02008,60-02009,48-00476,43-46210,88-12347,21-13900,82-12921,21-13901,XX-X1500,21-13902,60-02002,60-02003,60-02004,21-13907,XX-X1506,21-13908,XX-X1505,21-13909,XX-X1508,XX-X1507,XX-X1502,XX-X1501,XX-X1504,XX-X1503,48-00481,88-12337,73-00081,XX-X1509,60-02030,21-13933,60-02031,21-13934,60-02032,21-13935,60-02033,43-13794,60-02027,60-71043,60-02028,60-71044,60-02029,88-12362,60-71042,60-71047,60-71048,60-71045,60-71046,86-10094,89-50010,43-43162,86-10093,89-50012,86-10090,89-50014,86-10092,89-50016,86-10091,86-10076,84-70079,86-10075,89-7XXXX,21-13920,86-10077,84-70076,84-70075,60-02020,84-70078,60-02021,84-70077,60-02022,84-70072,60-02023,84-70071,60-02024,84-70074,60-02025,84-70073,60-02026,88-12352,60-02016,43-46208,60-02017,60-02018,43-46206,60-02019,88-12357,89-50020,89-50021,86-10082,89-50022,43-00003,89-50023,43-43175,89-50024,43-43178,72-08116,89-50025,43-00000,89-50026,89-50027,86-10080,73-00025,60-02052,60-02053,43-13335,60-02054,43-13334,60-02055,88-12392,60-02056,60-02057,60-02058,60-02059,84-70070,89-50070,89-50072,89-50074,CS 9,CS 8,89-50076,89-50078,CS 3,CS 2,CS 1,43-00030,88-12372,600,601,602,603,604,605,606,607,43-00021,608,43-00020,609,43-00041,43-00040,60-02070,73-00008,60-02071,60-02072,60-02073,60-02074,60-02075,60-02076,XX-X1511,60-02077,XX-X1510,60-02078,60-02079,83-30184,XX-X1517,XX-X1516,83-30182,XX-X1519,83-30183,XX-X1518,83-30180,XX-X1513,83-30181,XX-X1512,610,XX-X1515,611,XX-X1514,612,613,614,615,616,617,618,619,60-02060,60-02061,60-02062,60-02063,XX-X1520,60-02064,60-02065,XX-X1522,60-02066,XX-X1521,60-02067,60-02068,60-02069,88-12397,620,XX-X1523,621,622,83-30190,623,624,625,626,627,628,629,43-00042,62250,62252,84-70025,86-10021,FS2,84-70024,FS1,84-70027,84-70026,86-10022,5X-72100,84-70021,FS6,84-70020,FS5,84-70023,84-70022,20-X0107,20-X0104,20-X0105,20-X0102,630,631,20-X0101,632,633,82-12086,634,635,636,79-10138,637,79-10139,638,79-10136,639,79-10137,43-46610,79-10135,84-70017,86-10016,86-10015,60-02080,84-70014,60-02081,84-70013,60-02082,84-70016,86-10012,60-02083,84-70015,86-10011,84-70010,84-70012,84-70011,20-X0119,20-X0117,20-X0118,20-X0116,20-X0113,640,20-X0114,641,20-X0111,82-12096,642,20-X0112,643,644,20-X0110,645,646,82-12091,647,648,649,84-70007,86-10003,84-70006,86-10002,86-10005,86-10004,84-70003,84-70002,84-70005,86-10001,84-70004,86-10000,5X52000,84-70001,84-70000,86-10007,86-10006,86-10008,650,651,652,653,654,655,656,657,82-12061,43-13707,79-10143,79-10144,661,662,79-10142,5X-64500,663,664,43-46608,79-10140,43-46606,79-10147,79-10148,79-10146,86-10069,86-10068,XX-X1136,82-12046,82-12041,88-12302,43-43142,89-5XXXX,88-12307,XX-X1140,5X-71200,43-43161,XX-X1148,XX-X1144,82-12056,201,202,82-12051,203,204,205,86-10061,206,207,208,86-10062,209,86-10042,XX-X1114,XX-X1110,210,211,212,79-10194,XX-X1116,213,214,82-12021,79-10192,XX-X1118,215,88-12322,79-10193,216,217,218,219,43-43123,5X-53800,86-10032,42252,86-10031,43-13746,XX-X1124,82-12026,XX-X1120,220,221,222,223,224,XX-X1128,225,226,227,228,88-12317,229,86-10041,42250,230,231,43-43984,232,43-43987,233,43-43986,234,235,236,237,238,239,43-43981,5X-55600,43-43980,43-43983,56-74000,5X-52100,82-12126,240,69-10001CSP,56-74016,82-12131,69-10031A,82-12101,69-10030A,5052,82-12106,43-43974,43-43975,43-43978,43-43977,43-43972,43-43971,89-70122,89-70123,42-X1700,89-70124,89-70120,89-70121,42-X1709,5X-61000,42-X1706,42-X1705,42-X1708,42-X1707,42-X1702,42-X1701,42-X1704,42-X1703,89-70111,89-70112,89-70113,89-70114,89-70110,5X-66700,89-0111B,89-70100,89-70101,89-70102,89-70103,5X-53400,89-70104,83-30153,83-30154,43-13262,43-13261,43-16764,60-70211,60-70212,60-70210,60-70215,5X-55200,60-70216,5X-65000,60-70213,60-70214,60-70219,60-70217,60-70218,89-70152,89-70153,89-70154,43-13245,88-12297,83-30173,83-30174,83-30171,83-30172,60-70222,83-30170,60-70223,60-70220,60-70221,89-70144,89-70141,89-70142,89-70143,5X-61900,82-12973,83-30133,43-16792,82-12972,83-30134,83-30131,43-16310,82-12974,83-30132,83-30141,43-16304,43-16306,43-16308,89-70133,89-70134,89-70130,89-70131,43-13268,83-30144,83-30142,83-30143,83-30152,72-00236,82-55604,82-55603,21-13950,21-13951,21-13953,83-30113,82-55609,82-12956,83-30114,83-30111,83-30112,82-55606,83-30110,45-09810,45-09811,45-09812,45-09813,89-50110,89-50111,89-50112,89-50113,89-50114,82-55615,82-55612,21-13940,21-13941,21-13942,21-13943,82-12966,21-13944,21-13945,83-30124,21-13946,21-13947,83-30122,21-13948,82-55618,82-12961,83-30123,21-13949,83-30120,83-30121,43-16795,43-16796,83-30130,43-16797,43-16799,89-50120,89-50121,89-50122,89-50123,89-50124,82-55625,89-70184,82-12936,89-70181,89-70182,89-70183,89-70173,89-70174,83-30104,82-12946,83-30102,89-70171,83-30103,89-70172,83-30100,83-30101,82-12941,60-70200,60-70201,60-70204,60-70205,89-50100,60-70202,89-50101,60-70203,89-50102,60-70208,89-50103,60-70209,89-50104,60-70206,

2019/12/23  - PARKER CHOMERICS  - 选型指南  - Rev. 06.1 代理服务 技术支持 采购服务

【选型】Parker Chomerics(派克固美丽)热管理材料选型指南

目录- 产品简介    热传递基础    填缝材料    THERM-A-GAP™569,570,579,580,热垫片    THERM-A-GAP™974,G974,976,高性能热垫片    THERM-A-GAP™T63X系列,可涂布填缝材料    THERM-A-GAP™TP575NS,无硅热垫片    THERM-A-GAP™174,274,574,热垫片    THERMFLOW®相变垫片    HERMATTACH®热粘合带    THERM-A-FORM™可现场固化的灌注和底部填充材料    导热脂和导热胶    绝缘垫片    CHO-THERM®商用热绝缘垫片    CHO-THERM®高能热绝缘垫片    T-WING®和C-WING™薄型散热器    热管理词汇表    安全指南   

型号- 65-00-T6XX-0030,WW-XX-5442-ZZZZ,WW-XX-D426-ZZZZ,T500,69-XX-20684-ZZZZ,WW-XX-D387-ZZZZ,69-12-XXXXX-A274,WW-XX-D390-ZZZZ,WW-XX-4659-ZZZZ,61 - 07 - 0909 - G570,69-XX-20698-ZZZZ,6WWXXYYYYZZZZ,T630,WW-XX-D409-ZZZZ,WW-XX-YYYY-ZZZZ,WW-XX-D6875-ZZZZ,WW-XX-D375-ZZZZ,WW-XX-D410-ZZZZ,69-XX-20686-ZZZZ,WW-XX-D424-ZZZZ,THERM-A-FORM™ T64X,69-11-25177-T630,65-00-T6XX - 0030,65-00-T670-3790,WW-XX-D399-ZZZZ,T63X,T404,T647,60-12-20264-TW10,69-11-24419-T630,T405,T646,T766,T644,T642,WW-XX-D385-ZZZZ,62-20-23116-T274,69-11-27155-575NS,69-12-22745-CW10,69 - 12 - XXXXX - A569,WW-XX-D414-ZZZZ,65-00-YYYY-ZZZZ,T650,T636,T635,WW-XX-D389-ZZZZ,65-00-T6XX - 0010,575-NS,WW-XX-D407-ZZZZ,62-16-23115-A274,WW-XX-8531-ZZZZ,WW-XX-D392-ZZZZ,WW-XX-D373-ZZZZ,69-11-27156-575NS,65-00-1642-0000,60-12-20267-TW10,T64X,69-11-27157-575NS,WW-XX-D379-ZZZZ,62-13-23114-T274,WW-XX-D396-ZZZZ,WW-XX-D382-ZZZZ,WW-XX-D418-ZZZZ,WW-XX-D403-ZZZZ,60-XX-YYYY-ZZZZ,274,WW-XX-4306-ZZZZ,62-04-23111-A274,65-00-1641-0000,65-00-T644-0045,WW-XX-402-ZZZZ,62-16-23115-T274,69-XX-20675-ZZZZ,WW-XX-4353-ZZZZ,WW-XX-D397-ZZZZ,T670,WW-XX-D417-ZZZZ,WW-XX-D378-ZZZZ,T405-R,T418,WW-XX-D419-ZZZZ,T777,T413,T414,WW-XX-D380-ZZZZ,T411,T412,69-12-22849-CW10,60-12-20269-TW10,65-00-T6XX-0180,WW-XX-D421-ZZZZ,WW-XX-4997-ZZZZ,WW-XX-D377-ZZZZ,T660,WW-XX-4305-ZZZZ,69-XX-27083-ZZZZ,69-12-23802-CW10,67-XX-YYYY-ZZZZ,69-11-27159-575NS,T444,65-01-1641-0000,WW-XX-4511-ZZZZ,174,TP575NS,65-00-T646-0200,WW-XX-D428-ZZZZ,WW-XX-5791-ZZZZ,WW-XX-8302-ZZZZ,WW-XX-D371-ZZZZ,WW-XX-D422-ZZZZ,974,976,65-00-T647-0200,WW-XX-6956-ZZZZ,T558,T557,WW-XX-4996-ZZZZ,61-07-0909-G174,62 - 20 - 0909 - A579,69-XX-20685-ZZZZ,60-12-20268-TW10,T441,62 - 20 - 0909 - A574,WW-XX-D381-ZZZZ,WW-XX-D412-ZZZZ,G974,65-00-T6XX - 0300,WW-XX-D411-ZZZZ,WW-XX-D374-ZZZZ,61 - 07 - 0909 - G174,WW-XX-4661-ZZZZ,WW-XX-D391-ZZZZ,PC07DS-7,WW-XX-D425-ZZZZ,WW-XX-D386-ZZZZ,6W-XX-YYYY-ZZZZ,WW-XX-D372-ZZZZ,WW-XX-D430-ZZZZ,65-00-T6XX-0300,WW-XX-D427-ZZZZ,WW-XX-D408-ZZZZ,WW-XX-D413-ZZZZ,69-11-27158-575NS,THERM-A-FORM™ 164X,WW-XX-D388-ZZZZ,69-XX-27072-ZZZZ,WW-XX-D423-ZZZZ,WW-XX-D376-ZZZZ,WW-XX-5792-ZZZZ,69-XX-20687-ZZZZ,WW-XX-D429-ZZZZ,WW-XX-D398-ZZZZ,T630G,6-6W-XX-YYYY-ZZZZ,69-XX-27070-ZZZZ,62-07-23112-A274,WW-XX-5527-ZZZZ,69-XX-27082-ZZZZ,62-10-23113-A274,WW-XX-D395-ZZZZ,1642,1641,WW-XX-4969-ZZZZ,65-00-T650-0003,WW-XX-4374-ZZZZ,WW-XX-D370-ZZZZ,WW-XX-D401-ZZZZ,62-20-23116-A274,WW-XX-D404-ZZZZ,WW-XX-D420-ZZZZ,C-WING,62-13-23114-A274,62-04-23111-T274,69-11-27154-575NS,65-00-T6XX - 0180,62-10-23113-T274,65-00-T644-0200,65-00-T642-0035,WW-XX-D383-ZZZZ,WW-XX-D405-ZZZZ,1671,60-12-20266-TW10,69 - 12 - XXXXX - A274,WW-XX-D416-ZZZZ,62-07-23112-T274,569,WW-XX-D065-ZZZZ,164X,T725,69-XX-YYYY-ZZZZ,65-00-T6XX-0010,65-00-T642-0250,65-00-T646-0045,WW-XX-D393-ZZZZ,THERM-A-GAP™ T63X,T609,570,WW-XX-D400-ZZZZ,69-XX-21259-ZZZZ,1678,574,1674,579,WW-XX-D406-ZZZZ,69-XX-20672-ZZZZ,65-00-T647-0045,WW-XX-D394-ZZZZ,69-XX-20991-ZZZZ,T710,580,WW-XX-D384-ZZZZ,WW-XX-D415-ZZZZ,60-12-20265-TW10,T-WING

2007年10月  - PARKER CHOMERICS  - 选型指南 代理服务 技术支持 采购服务 散热方案设计

Parker Chomerics(派克固美丽)热界面材料(用于电子产品散热)选型指南

目录- Company Profile    Heat Transfer Fundamentals    Thermal Gels    Gap Filler Pads    Phase Change Materials    Thermal Tapes    Potting and Underfill Materials    Dielectric Pads    Heat Spreaders    Thermal Greases    Glossary   

型号- PAD30G,60-XX-D065-ZZZZ,60-XX-4353-ZZZZ,60-XX-D379-ZZZZ,60-XX-D417-ZZZZ,G570,PAD30A,GEL 75,T500,60-XX-6875-ZZZZ,60-XX-D420-ZZZZ,G974,60-XX-D381-ZZZZ,60-XX-4305-ZZZZ,60-XX-D382-ZZZZ,G579,579PN,A580,60-XX-D396-ZZZZ,T630,60-XX-4997-ZZZZ,60-XX-4306-ZZZZ,PAD 30,60-XX-D416-ZZZZ,6W-XX-YYYY-ZZZZ,60-XX-4996-ZZZZ,60-XX-D421-ZZZZ,60-XX-D402-ZZZZ,60-XX-6956-ZZZZ,60-XX-D404-ZZZZ,G569,60-XX-D415-ZZZZ,60-XX-D418-ZZZZ,60-XX-D429-ZZZZ,65-00-T670-3790,65-1P-CIP35-5600,60-XX-D395-ZZZZ,60-XX-D398-ZZZZ,60-XX-5792-ZZZZ,69-1X-YYYYY-ZZZZZZ,65-00-CIP35-0400,60-XX-D406-ZZZZ,T404,T647,60-12-20264-TW10,PAD60A,T405,T646,60-XX-D400-ZZZZ,T766,T644,T642,60-XX-4511-ZZZZ,60-XX-D384-ZZZZ,60-XX-D428-ZZZZ,60-XX-5791-ZZZZ,65-00-YYYY-ZZZZ,60-XX-D419-ZZZZ,T650,60-XX-D385-ZZZZ,60-XX-D391-ZZZZ,T636,T635,60-XX-D394-ZZZZ,G580,TC50,60-XX-D397-ZZZZ,60-XX-D378-ZZZZ,60-XX-D375-ZZZZ,60-XX-D425-ZZZZ,1641,65-5P-CIP35-10452,60-XX-D422-ZZZZ,60-XX-D372-ZZZZ,60-XX-D403-ZZZZ,60-12-20267-TW10,GEL 37,6W-XX-1015-ZZZZZZ,60-XX-D373-ZZZZ,60-XX-D409-ZZZZ,PC07DM-7,60-XX-4661-ZZZZ,579KT,60-XX-D387-ZZZZ,60-XX-YYYY-ZZZZ,60-XX-D412-ZZZZ,65-00-1641-0000,60-XX-D388-ZZZZ,65-00-T644-0045,65-00-T644-0200,GEL 30,64-XX-YYYY-ZZZZ,60-XX-D374-ZZZZ,60-XX-D390-ZZZZ,60-XX-4659-ZZZZ,60-XX-D408-ZZZZ,T670,65-00-T642-0035,T405-R,60-XX-4374-ZZZZ,T418,60-XX-D424-ZZZZ,60-XX-D410-ZZZZ,GEL 45,T777,1642 65-00-1642-0000,60-XX-D413-ZZZZ,T414,T411,T412,1671,60-12-20266-TW10,60-XX-8531-ZZZZ,60-12-20269-TW10,60-XX-D407-ZZZZ,PAD 60,569PN,60-XX-5527-ZZZZ,65-XX-YYYYY-ZZZZ,60-XX-5442-ZZZZ,60-XX-D426-ZZZZ,569,65-00-CIP35-0200,65-00-CIP35-0045,T660,PAD30PN,HCS10,T725,60-XX-D370-ZZZZ,60-XX-D376-ZZZZ,67-XX-YYYY-ZZZZ,65-00-T642-0250,60-XX-8302-ZZZZ,T444,GEL 8010,T766-06,65-00-T646-0045,A569,65-01-1641-0000,60-XX-D423-ZZZZ,PAD30KT,60-XX-D392-ZZZZ,60-XX-4969-ZZZZ,T609,570,65-00-T646-0200,1678,1674,60-XX-D371-ZZZZ,974,60-XX-D399-ZZZZ,60-XX-D405-ZZZZ,579,60-XX-D401-ZZZZ,976,60-XX-D377-ZZZZ,65-00-CIP35-1200,65-00-T647-0200,65-00-T647-0045,60-XX-D393-ZZZZ,60-XX-D427-ZZZZ,65-00-T650-0160,T558,HCS10G,6W-XX-0909-ZZZZZZ,T710,T557,CIP 35,60-XX-D383-ZZZZ,A579,PAD60,60-XX-D386-ZZZZ,580,60-XX-D389-ZZZZ,A570,60-XX-D430-ZZZZ,GEL 25NS,60-XX-D411-ZZZZ,HCS10A,60-XX-D414-ZZZZ,60-12-20268-TW10,T441,60-XX-D380-ZZZZ,60-12-20265-TW10

January 2022  - PARKER CHOMERICS  - 选型指南 代理服务 技术支持 采购服务
展开更多

电子商城

查看更多

品牌:PARKER CHOMERICS

品类:散热器

价格:¥9.5445

现货: 884

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥34.2090

现货: 200

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥18.4005

现货: 200

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥24.2325

现货: 200

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥18.4005

现货: 192

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥17.6985

现货: 133

品牌:PARKER CHOMERICS

品类:吸波片

价格:¥118.4760

现货: 56

品牌:PARKER CHOMERICS

品类:金属簧片

价格:¥10.0980

现货: 39

品牌:PARKER CHOMERICS

品类:吸波片

价格:¥60.9660

现货: 37

品牌:PARKER CHOMERICS

品类:吸波片

价格:¥71.6310

现货: 37

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

品牌:

品类:

价格:

现货:

现货市场

查看更多

暂无此商品

海量正品紧缺物料,超低价格,限量库存搜索料号

查看更多

授权代理品牌:接插件及结构件

查看更多

授权代理品牌:部件、组件及配件

查看更多

授权代理品牌:电源及模块

查看更多

授权代理品牌:电子材料

查看更多

授权代理品牌:仪器仪表及测试配组件

查看更多

授权代理品牌:电工工具及材料

查看更多

授权代理品牌:机械电子元件

查看更多

授权代理品牌:加工与定制

世强和原厂的技术专家将在一个工作日内解答,帮助您快速完成研发及采购。
我要提问

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

研发客服
商务客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面