YINT‘s ESD0524P ESD Protection Diode Design with Only 0.5mm Pitch to ESD Protection Circuits for HDMI
Introduction To ESD:
In the design of high-speed interface circuits, more and more attention is paid to the electromagnetic field effects of electrostatic discharge, such as electromagnetic interference (EMI) and electromagnetic compatibility (EMC). This sudden discharge can be caused by direct contact or by the generation of an electrostatic field. Although ESD damage to the human body is rare, it can be fatal to sensitive electronic devices. HDMI graphics chips are manufactured using silicon wafers with very small geometries, which are very sensitive to ESD. Most of these graphics chips have ESD protection integrated inside; however, this measure only provides protection in a controlled manufacturing environment. In the real world, users often touch interfaces like HDMI and thus cause ESD.
Various levels of damage are defined in the IEC61000-4-2 standard. Accumulated voltages of 15KV are not uncommon when a person walks on carpet. ESD can easily damage or even destroy internal integrated circuits.
Introduction To HDMI:
High-Definition Multimedia Interface (HDMI) is an uncompressed, all-digital audio/video interface. It provides a high-speed interface between video/audio source equipment and sink equipment, such as connecting DVD players and digital displays. Circuit manufacturers continue to shrink the minimum dimensions of transistors, interconnects, and insulating layers in their devices, resulting in smaller structures for high-speed devices that are more susceptible to breakdown effects at lower energy levels.
The internal ESD protection of the HDMI interface is not enough to protect the graphics chip from destruction. In order to ensure the performance of this port, consumer electronics manufacturers need to strengthen the ESD performance of the HDMI port, that is, how to meet the signal integrity and impedance requirements of the HDMI Compatibility Test Specification (CTS) and at the same time, according to the globally recognized ESD standard IEC61000- 4-2 hardened HDMI ports.
ESD Protection Requirements For HDMI
Very high diode switching speed (nanoseconds) and ultra-low line capacitance (<1pF) ensure signal integrity.
No degradation in ESD protection after several ESD strikes.
Leakage remains low even after hundreds of ESD discharges.
Highest level of integration in a small footprint.
RF Routing Optimized Package at PCB Level.
Fully Compliant with HDMI 1.3 Specification Requirements.
ESD0523P For HDMI
It can be directly used for 2 pairs of 100 ohm differential impedance signal lines, regardless of its board type, number of layers, thickness and circuit board material. To promote high-speed and fast circuit design, ESD0524P ESD Protection Diode is a small lead-free package with only 0.5mm pitch Ideal for streamlined layouts, this tight-pitch package design can help reduce wiring discontinuities and increase common-mode noise rejection.
For streamlined high-speed signal line design and to meet signal line impedance requirements, the special design of ESD0524P provides ESD 4-wire protection requirements, in line with IEC61000-4-2 ESD standards (±8KV CONTACT ESD and ±15KV Air ESD), while providing excellent embedded voltage characteristics, reduce the overvoltage stress of the HDMI chip, and improve the reliability of the overall HDMI system.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由叫我大表哥吧转载自YINT News，原文标题为:ESD Protection Requirements For HDMI，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
ESD Protection Diode ESDULC3V3D8 with Excellent Clamping Capability, Low Capacitance, Low Leakage and Fast Response Time
The ESDLC3V3D8 is designed to protect voltage sensitive components that require ultra−low capacitance from ESD and transient voltage events. Excellent clamping capability, low capacitance, low leakage, and fast response time, make these parts ideal for ESD protection on designs where board space is at a premium. Because of its low capacitance, it is suited for use in high frequency designs such as USB 2.0 high speed and antenna line applications.
产品 发布时间 : 2024-02-29
ESD Protection Diode ESDSLVU2.8-4-H, Features Integrated Low Capacitance Compensation Diodes that Reduce the Typical Capacitance to 2pF Per Line
The ESDSLV2.8-4-H of transient voltage suppressors are designed to protect low voltage, the features integrated low capacitance compensation diodes that reduce the typical capacitance to 2pF per line. The SLVU2.8-4-H is in an SO-8 package and may be used to protect two high-speed line pairs.
产品 发布时间 : 2024-02-23
Bi-direction ESD Protection Diode ESDBVD5V0C2 for Applications such as HDMI, Display Port TM, and MDDI Interfaces
The JSCJ Bi-direction ESD protection diode ESDBVD5V0C2 is designed to protect voltage sensitive electronic components from ESD and other transients. Excellent clamping capability, low leakage, low capacitance, and fast response time provide best-in-class protection on designs that are exposed to ESD.
产品 发布时间 : 2023-11-12
ESD Protection Diode ESD3V3D5 with Excellent Clamping Capability, Low Leakage and Fast Response Time
ESD3V3D5 is designed to protect voltage sensitive components from ESD and transient voltage events. Excellent clamping capability, low leakage and fast response time, make these parts ideal for ESD protection on designs where board space is at a premium.
产品 发布时间 : 2024-02-22
Bi-direction ESD Protection Diode ESDBKV15VD3, Features with a Low Capacitance of 2pf and a High Level of ESD Protection
The ESDBKV15VD3 Bi-direction ESD Protection Diode is designed to protect voltage sensitive electronic components from ESD and other transients. Excellent clamping capability, low leakage, low capacitance and fast response time provide best in class protection on designs that are exposed to ESD. The combination of small size, low capacitance, and high level of ESD protection makes them a flexible solution for applications such as HDMI, Display Port TM, and MDDI interfaces. It is designed to replace multiplayer varistors (MLV) in consumer equipments applications.
产品 发布时间 : 2024-02-21
电子商城
服务
测试等级：空气放电30KV±5%；接触放电30KV±5%，适用标准：GB/T 17626.2、IEC61000-4-2、ISO10605、GB/T 19951；给用户产品出电路保护设计方案建议及整改。点击预约，支持到场/视频直播测试，资深专家全程指导。
实验室地址： 深圳/上海 提交需求>
整体外形尺寸小至0.6*0.3*0.3mm (DFN0603)，工作电压范围覆盖2.5V~36V，电容值低至0.2pF，浪涌能力最高可达240安培，静电等级可达空气放电、接触放电±30KV。提供免费浪涌测试仪、静电测试仪测试。
提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论