Crocus Technology Unveiled Industry-Leading TMR-based Angular Sensor CT300 with an Angular Error Well Below 0.5°
The CT300 TMR-based Angular Sensor is a 2D magnetic sensor with an angular error well below 0.5°.
Santa Clara, California, November 6, 2018 – Crocus Technology Inc., a leading supplier of disruptive TMR sensors, announced the CT300 device, a new break-through TMR-based angular (2D) magnetic sensor with an extremely low angular error and high stability over a wide temperature and voltage ranges to address a variety of markets.
The CT300 is designed using Crocus’s revolutionary Magnetic Logic Unit™ (MLU™) technology and consists of two full-bridge magnetic resistor networks capable of two-dimensional sensing. In the presence of a rotating magnetic field, the CT300 senses the field and produces two sets of differential signals representing the sine (SIN) and cosine (COS) waveforms. Once the differential signals of the CT300 are processed and compensated, the resulting angular error will be at or below 0.5° over a temperature range of -40℃ to +150℃. A single CT300 can measure the absolute angle resulting from a full 360° rotation and can sense magnetic fields ranging from 20mT to 80mT.
“The CT300 is a high-performance TMR angular position sensor that showcases the strength of our MLU technology. It will help our customers achieve both higher accuracy measurements and stable performance over the operating range of temperatures and fields for applications that require a precise angular position, rotation direction, and speed information” states Zack Deiri, CSMO and GM of Sensor Products at Crocus Technology. “The CT300 exceeds the performance metrics of competing solutions in terms of angular error combined with very low noise, high-frequency response, and low power consumption which makes the device ideal for, but not limited to, battery operated consumer hand-held devices and IoT applications.”
The CT300 addresses the demands of the consumer, industrial, medical, and automotive markets and is highly suited for applications such as OIS- enabled camera modules, AF- enabled camera modules, optical encoders, BLDC motor control, IoT-enabled smart devices and appliances, automation equipment, industrial controls and robotics where precise angular position measurements are required.
CT300 is available in wafer/KGD (Known-Good-Die), an 8-lead TSSOP package, and in an ultra-low profile and small form factor 8-lead DFN package. Samples has been available in December 2018 and fully qualified for production in the first quarter (Q1) of 2019.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由玄子转载自Crocus Technology News,原文标题为:Crocus Technology Inc. Unveils Industry-Leading TMR-based Angular Sensor,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Hosiden Has Developed a World First Retrofit Type of Explosion-proof IoT Meter-reading Sensor CFU0655
Hosiden has developed a world first retrofit type of explosion-proof IoT meter-reading sensor. This is in technical cooperation with a long-established manufacturer of measuring instruments in Osaka, Kobata Gauge MFG. Co., Ltd. The sensor is intended for reading analog measuring instruments used within explosion-proof area.
IOT Sensor Monitoring System Gateway IOT-G010
IoT sensor monitoring system gateway IOT-G010 is mainly used for sensor monitoring and control of the Internet of Things. The whole network system is composed of gateway IOT-G010 and node IOT-N010/ IOT-THS010, which uses a wireless star network combined with Mesh networking. A good coordination mechanism and precise scheduling algorithm are used internally between the node and the gateway to avoid collisions between data packets in the air.
OMNIVISION Announces New High-Resolution Image Sensors for Industrial and Consumer Security Surveillance Cameras
OMNIVISION announced the addition of two new image sensors to its comprehensive family of solutions for industrial and consumer security surveillance cameras.
Body Temperature Sensors with Precise Temperature Control for Medical Laser Devices
The use of laser-assisted surgery is an incredible advancement in medicine, but it requires precise temperature control to ensure safety and effectiveness. Body temperature sensors are the key component that makes this possible and, most importantly, safe.
Only TMR Current Sensors Can Enable Efficient Industrial and Automotive Applications
Today, a wide variety of industrial and automotive applications are demanding higher efficiency which impacts many design decisions including the current sensing requirements. The demands are so dramatic that it may be that existing magnetic-based solutions will be obsolete by 2030. These applications demand wide band gap (WBG) power devices pushing the performance requirements for current sensing.
P162 NovaSensor 2.5F医用硅压力传感器芯片
描述- NovaSensor的P162医疗级硅压阻压力传感器芯片,采用微型1150 x 725 mm芯片尺寸,适用于小型导管。该芯片采用半桥设计,需要外部电阻完成全桥配置。芯片尺寸小,由NovaSensor的专有硅融合键合(SFB)工艺实现。当用交流或直流电压源激励时,P162产生与输入压力成比例的mV输出。
型号- P162
The Smallest MEMS Pressure Sensor in The Industry, Perfectly Suitable for Medical Catheter Application
When small is not small enough, look to NovaSensor‘s line of MEMS pressure sensor die for the perfect fit in your medical catheter application. With products ranging in size, pressure range, and ease of integration, we have the sensor solution you are looking for. Along with in-house wafer fabrication, NovaSensor possesses the technical knowledge and manufacturing infrastructure to design, build, test and modify sensors right within our own facilities.
Delve into Industrial Sensor Calibration through Two Lenses: Logistically and Economically
Calibrating sensors that are already in use isn‘t always a quick and easy process. This article looks at this through two lenses: logistically and economically.
TDK to Showcase the Power of Its Advanced Sensor Solutions at Sensors Converge 2024
TDK sensor solutions help further the company’s vision of transforming designs into reality. At TDK’s Sensors Converge booth, attendees can interact with innovations in sound, motion, pressure, and more. TDK technology will come to life in the form of Ribbit the Robot, an interactive roaming robot showcasing the broad spectrum of TDK technologies in a single use case. Ribbit will chat with participants about new possibilities for applications in IoT, robotics, automotive, and beyond.
UMS Introduces a Range of RF Front End and ISM sensors for Industrial Applications
UMS introduces a range of RF & millimeter sensor integrated solutions for industrial applications.
Medical Pressure Sensors & The Critical Care Devices They Support
Though small in size, custom medical pressure sensors play an integral role in ensuring the efficacy of many devices used in critical care. From ventilators to catheters, dialysis machines to surgical assemblies, custom pressure sensors help monitor and regulate key parameters that impact patient outcomes.
Melexis ToF sensor MLX75027RTI/STI Supports Automotive and Industrial Functional Safety Applications
Tessenderlo, Belgium, 20 June 2023 – Melexis strengthens its position in time-of-flight (ToF) technology, through further product range expansion. The newly announced MLX75027RTI ToF sensor allows the functional safety requirements of automotive and industrial customers to be met.
InvenSense Announces SensorStudio 2.3 Supporting Dataflow-Based Custom Sensors
InvenSense, Inc. announced the new SensorStudio 2.3 release. SensorStudio 2.3 is the latest reiteration of InvenSense‘s sensor prototyping and development platform for the Internet of Things (IoT). The support of custom sensors allows IoT developers a wider range of physical and virtual sensors.
Application of Sensors in Healthcare: Catheters
Regardless of their intended application, a catheter is much like any other medical device that takes measurements – it‘s only as good as the sensor technology behind it.
RICHSENS Releases Current Sensor for Elevator IoT
The operation basis of the elevator Internet of Things system is the collection of elevator operation status data. RCEI (RICHSENS current sensor for elevator internet) is a patented product of RICHSENS Yichang RICHSENS Sci&Tech Co.,LTD. It is mainly used in elevator Internet of Things.
电子商城
品牌:MELEXIS
品类:Integrated Current Sensor IC
价格:¥15.3811
现货: 50,898
品牌:MELEXIS
品类:Triaxis Position Sensor IC
价格:¥22.8370
现货: 38,102
品牌:MELEXIS
品类:Integrated Current Sensor IC
价格:¥14.2165
现货: 24,580
现货市场
品牌:SILICON LABS
品类:Switch Hall Effect Magnetic Position Sensor
价格:¥2.2924
现货:126,000
登录 | 立即注册
提交评论