Principle of Resettable Current Fuses
Resettable current fuses offer a unique solution for protecting electrical circuits while providing the convenience of being reusable. Here's how they work.
Resettable current fuses typically use a polymer-based material that changes its electrical resistance in response to an increase in current. When the current exceeds a certain threshold, the polymer material heats up and changes its state, increasing its resistance and limiting the current flow.
Once the overcurrent condition is removed, the polymer material cools down and returns to its original low resistance state, allowing the circuit to resume normal operation. This resettable feature makes these fuses highly convenient as they do not need to be replaced like traditional fuses after each overcurrent event.
The principle of operation of resettable current fuses is based on a combination of thermal and electrical properties of the polymer material. The material is designed to have a specific temperature coefficient of resistance, which determines how its resistance changes with temperature.
Resettable current fuses often have a defined trip current and hold current. The trip current is the level of current at which the fuse will activate and limit the current flow. The hold current is the maximum current that the fuse can handle without activating.
In some cases, resettable current fuses may also incorporate additional features such as overvoltage protection or reverse polarity protection to provide more comprehensive circuit protection.
resettable current fuses operate on a unique principle that combines thermal and electrical properties to provide protection for electrical circuits. Their reusable nature and convenience make them a popular choice in many applications.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Natalia转载自XC Official Website,原文标题为:Principle of Resettable Current Fuses,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
What Is The Difference between Resettable Fuses and Traditional Fuses?
PPTC and fuses both do the same job: protecting electronic circuits from overcurrent related issues. The difference is that the fuse must be replaced after tripping, while PPTC can reset itself. PPTC can handle sudden overcurrent events without the need for replacement.
技术探讨 发布时间 : 2024-09-04
【技术】一文带你正确认识保险丝的熔断特性及熔化热能值
文章由旭程电子带各位工程师正确认识保险丝的熔断特性及熔化热能值。熔断特性即电流保险丝所加负载电流与保险丝熔断时间的关系,熔化热能值(I2T)是指使保险丝的熔断体熔化,部份汽化的切断电流所需要的公称能量值,简单说就是使保险丝熔断所需的最小热能值。
技术探讨 发布时间 : 2021-11-05
Is the Fuse Lead or Tin
The material of fuses is usually not simply lead or tin, but alloys of various components such as lead tin alloys.
技术探讨 发布时间 : 2024-09-20
【经验】一文带你了解保险丝的熔断时间
保险丝的熔断时间能比较直观的反应保险丝保护性能的好坏,它是保险丝的一个重要参数,实际的熔断时间分为预飞弧时间和飞弧时间,在数据上用I-t曲线和I-t表格来体现,也叫熔断特性或安秒特性,本文旭程带你解析保险丝的熔断时间。
设计经验 发布时间 : 2021-12-21
The Installation Precautions for Current Fuses
The installation of current fuses is crucial for ensuring the safety and proper functioning of electrical circuits. Here are some important installation precautions to keep in mind.
设计经验 发布时间 : 2024-11-04
旭程保险丝选型表
提供旭程保险丝选型,操作温度-40℃至+125℃,额定电流涵盖250mA-20A,额定电压250VAC或63VDC。产品均符合RoHS、REACH法规要求,尺寸规格涵盖广。
产品型号
|
品类
|
Current Rating(额定电流:mA/A)
|
Voltage Rating(额定电压:VAC)
|
Interrupting Rating(断续额定:A)
|
应用等级(工业级/商业级/汽车级/军工级/航空航天级)
|
形状材质
|
等级认证标准
|
快慢断
|
有无带脚
|
工作温度范围(最低:℃)
|
工作温度范围(最高:℃)
|
尺寸(mm)
|
018.025020008
|
保险丝
|
250mA
|
250VAC
|
50A
|
工业级
|
玻璃管
|
IEC60127
|
慢断
|
带脚
|
-40℃
|
125℃
|
3.6*10mm
|
选型表 - 旭程 立即选型
旭程(XC)温控器选型指南
目录- 公司介绍 Company Profile 温控器 Thermostat 保险丝 Fuses 企业资质与专利 Qualification and Patents Certifications
型号- C0015302Z,9K7.SK-B5,KSD305系列,9K7.SK-B3,CG-B,CG-A,SK-B1系列,9K7CG-XXX,SK-B5系列,KSD301系列,KSD307B,SK-A1,KSD307 SERIES,SK-A4,C0015301Z,9K7.SK-C2,SK-C2系列,C0025302Z,C4000302Z,KT SERIES,9K7.JW-A072,C2000302Z,CG-B系列,C0080303Z,9K7.SK-B11,JW-C系列,KSD305B,JW,KSD305-XXXX/XXXX,SK-C2,9K7SK-XXXX/XXXXX,C4000301Z,C5000301Z,SK,CG SERIES,9K4307-XXXX/XXXX,C0020302Z,CG,KT,KSD9700 SERIES,SK-B1,C5000302Z,C1000302Z,C0050303Z,SK-B5,C0035302Z,C0020303Z,C0040302Z,KSD307系列,KSD301-XXX/XXXXXX/XXX,9K7KT-XXXX/XXXXX,9K7.SK-F3,SK-F5系列,JW-B系列,C0060303Z,KSD9700,C0030301Z,KT系列,C7500301Z,C0070303Z,C0040303Z,SK-A1系列,9K9.9700-XXXXXXX,KSD305,KSD307,KT-A2,KT-A1,KSD301,C0030302Z,JW SERIES,JW系列,C0020301Z,C7500302Z,C0010302Z,9K4.307B,JW-A系列,CG-A1,C0025301Z,CG系列,KSD9700系列,C3000301Z,C2000301Z,C0030303Z,KT-A系列,SK SERIES,JW-B,JW-C,SK系列,KSD301 SERIES,KSD305 SERIES,CG-B2,C0010301Z,SK-F5,C3000302Z,SK-F6,9K7JW-XXXX,CG-A系列,KSD307-XXXX/XXXX,KT-A,9K4.307
旭程(XC)保险丝选型指南
目录- Company Profile Fuse User's Manual Fuse Auto Fuse Fuse Holder Thermostat
型号- 06F,3S,C0015302Z,C0040302Z,3T,10C,06T,C0060303Z,4F,KSD9700,C0030301Z,6CH,C7500301Z,4T,C0015301Z,C0070303Z,4TE,C0040303Z,8TE,C0025302Z,5C,KSD305,5F,5G,C4000302Z,5H,9L,KSD301,C2000302Z,C0030302Z,10FV,C0020301Z,5S,C7500302Z,5T,C0010302Z,24F,12F,32F,C0080303Z,5SH,6B,6C,C0025301Z,6F,6G,24T,6H,12T,C3000301Z,C4000301Z,C5000301Z,2F,C2000301Z,C0030303Z,32T,R3-13,5GH,R3-12,R3-11,5CH,6S,C0020302Z,6T,2T,5TE,XC-1,BS1362,C0010301Z,C3000302Z,5TR,3F,3G,C5000302Z,C1000302Z,XC-2,C0050303Z,C0035302Z,C0020303Z
Fuse Material Has A Decisive Impact on Its Performance
Fuses are generally made of silver copper alloy with high resistivity and low melting point. This alloy has good conductivity and melting characteristics, which can quickly melt when the current is too high, thus protecting the circuit. Early fuses were often made of lead antimony alloy, but due to safety reasons, this material has been phased out.
技术探讨 发布时间 : 2024-08-23
【电气】旭程推出17C系列工业保护熔断器,迈出工业领域产品系列开发和转型升级的关键一步
旭程17C系列熔断器主要为带端脚产品,适用于端子插件,其本体尺寸47±1.5mm,带端脚尺寸76.6±2mm,产品符合ROHS、REACH、无卤等环保要求。推荐料号:061.2400G0001、061.2630G0001、061.3100G0001。
产品 发布时间 : 2023-10-13
【技术】一文介绍电阻式保险丝快熔断与慢熔断的区别
在上一期文章当中我们向大家介绍了旭程2F系列电阻式快熔断保险丝,而除此之外,旭程同样推出了2T系列电阻式慢熔断保险丝,其本体的尺寸为2.7*7.3mm、额定电压125V/250V,额定电流250mA-10A,工作温度-40℃~125℃。
技术探讨 发布时间 : 2023-08-01
What is the Reason Why the Fuse Keeps Burning Out?
Using a fuse that is too small can easily burn out and cause power outages, while using one that is too large may cause damage to electrical equipment. So for safety reasons, to ensure the “safety“ of the fuse, the following points should be noted.
设计经验 发布时间 : 2024-08-13
【产品】双刀双掷温控开关KSD302系列耐久性可达10000次,常开型温度上升、触点接通
旭程推出的KSD302系列产品是利用国外优质双金属片作为感应温度元件,当温度升到标准动作温度时,双金属片受热产生内应力而突跳。通过两组双金属片推动两组触点,达到控制两组电号或正负级的断开与接通,是一种双刀双掷的温控开关。
新产品 发布时间 : 2021-10-26
【元件】旭程10C系列电力保险丝满足50KA/1000V分断能力标准,有效保护工业设备
旭程10C电力保险丝主要分为带端子和平头两种系列,适用于插件和卡座安装,其中平头产品本体尺寸为38±0.6mm,带端子产品尺寸为40±1mm。主要由外帽、内帽、管体、可熔体和消弧剂组成,其中外帽为黄铜镀银,内帽黄铜镀镍,管体为陶瓷管,可熔体为金属丝或金属片,消弧剂为石英砂。
产品 发布时间 : 2023-10-13
电子商城
登录 | 立即注册
提交评论