Advantages of BLE 5.1 Module BLE5101 on the Market
Introduction of BLE 5.1 Module BLE5101 from NiceRF
BLE5101 is a Bluetooth mesh networking, coexisting master-slave role, low-power 2.4GHz BLE 5.1 module launched by NiceRF.
(BLE5101)
Advantages of choosing BLE 5.1 Module BLE5101
1. Support BLE Mesh function, which can be used with other modules to achieve mesh networking.
2. Support the coexistence of master and slave roles, which can connect multiple masters and slaves at the same time, up to 20 connections.
3. Support over-the-air upgrade (OTA DFU).
4. Support two connection modes: manual connection and automatic connection.
5. Support custom 16-bit UUID, including one Service uuid and two Characteristic uuid, which can be flexibly configured and compatible with similar BLE products.
6. The BLE module passed FCC ID, CE-RED and BQB certification.
7. Small Size
The differences between BLE 5.1 Module BLE5101 and others on the market
Above are the differences between our BLE 5.1 Module BLE5101 and the others on the market. Hope it can help you.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Ray转载自G-NiceRF Official Website,原文标题为:Advantages of BLE 5.1 Module BLE5101 on the market,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
蓝牙mesh组网、主从并存、低功耗蓝牙5.1转串口收发模块BLE5101,工作信号频段2.4GHz
2021年7月,思为无线隆重推出一款基于蓝牙协议5.1版本的蓝牙转串口收发模块BLE5101,主从角色并存,体积小,功耗低,工作信号频段为2.4GHz。
思为无线低功耗5.1蓝牙模块BLE5101,支持BLE Mesh功能且主从角色并存可最多支持20个连接
BLE5101是思为无线推出的一款蓝牙mesh组网、主从并存、低功耗2.4GHz蓝牙5.1模块。支持BLE Mesh功能,可与其它模块搭配实现mesh组网。支持主从角色并存,可同时连接多个主机与从机,最多20个连接。本文介绍BLE5101与市面上同类型蓝牙5.1模块的优势对比。
G-NiceRF BLE5201 Module Communication Distance Testing Reaches 150m
The BLE module BLE5201 of NiceRF adopts Silicon labs EFR32BG22C224 SOC chip, which is characterized by low power consumption, small size, long transmission distance and strong anti-interference ability. It is mainly used in Bluetooth mesh low-power nodes, intelligent door locks, personal medical care and fitness equipment.
低功耗蓝牙模块和经典蓝牙模块的区别
蓝牙模块是指集成蓝牙功能的芯片基本电路集合,用于短距离2.4G的无线通讯模块。经典蓝牙模块(BT)泛指支持蓝牙协议在4.0以下的模块,一般用于数据量比较大的传输。低功耗蓝牙模块(BLE)是指支持蓝牙协议4.0或更高的模块,也称为BLE模块,最大的特点是成本和功耗的降低,使用于实时性要求比较高的产品中。本文介绍低功耗蓝牙模块和经典蓝牙模块的区别。
Application of BLE Module in Forest Rescue System, with Long Transmission Distance and Strong Anti-interference Ability to Ensure Data Stability
The Bluetooth module integrated with Bluetooth technology has been widely applied ; With the development of Bluetooth technology, low power consumption, small size and low-cost chip solutions enable BLE modules to be used even in extremely small devices.The BLE module is not only used in our daily life, but also plays an important role in the forest rescue system.
G-NiceRF无线模块选型表
提供G-NiceRF 2.4G无线模块,3D计步模块,ANT+无线串口模块,ASK发射模块,ASK模块四件套,LORA无线模块,UWB双向测距定位模块,低功耗蓝牙模块,对讲机模块,全双工无线数据语音模块,数字无线音频收发模块,卫星定位模块,无线模块,无线射频模块,无线透传模块,无线音频收发模块产品选型,可多尺寸选择,最大工作频率达6489.6MHz/7987.2MHz
产品型号
|
品类
|
尺寸(mm)
|
等级认证标准
|
工作频率(MHz)
|
输出功率(mW、W)
|
LORA1276-C1-915MHZ
|
LORA无线模块
|
16mmx16mm
|
ROHS,IC,ID,FCC
|
915MHz
|
100mW
|
选型表 - G-NiceRF 立即选型
Will the 2.4 GHz RF Module and the Bluetooth Module Interfere with Each Other?
2.4 GHz rf modules and Bluetooth modules are widely used in IoT application scenarios. These two wireless modules are also found everywhere in our lives, and the working frequency band of Bluetooth modules is also 2.4g. So will the 2.4 GHz rf module and the bluetooth module interfere with each other?
思为无线5.1蓝牙模块BLE5101的4大应用注意事项
BLE5101是思为无线推出的一款基于蓝牙协议5.1版本的蓝牙模块,主从角色并存,体积小,功耗低,工作信号频段为2.4GHz。本文介绍BLE5101模块使用注意事项。
低功耗蓝牙模块BLE5101、BLE5201适用于小型设备,尺寸比1元美金硬币(2018)小
蓝牙无线技术在小型设备应用上主要基于其解决方案研发,蓝牙无线技术发展至今,几乎覆盖了所用有行业的小型设备。如:POS刷卡机、停车场的小型感应器、蓝牙振动棒、工业用的识别器、电子感应器、快递行业的感应器等等。本文介绍蓝牙无线技术在小型设备应用的一些关键要求。
Application Requirements of BLE Module on Small Devices
The application of Bluetooth wireless technology in small devices is primarily based on its solution development. The evolution of Bluetooth wireless technology has covered almost all small devices in various industries, such as POS card machines, parking lot sensors, Bluetooth vibration rods, industrial identifiers, electronic sensors, express delivery industry sensors, etc. So, what are the key requirements for the application of Bluetooth wireless technology in small devices?
低功耗蓝牙模块是如何作用于传感器的?
随着低功耗蓝牙在各类物联网应用中,设备间数据交换的零丢包,越来越多的物联网工程师开始将数据采集和传输的重担移交给低功耗蓝牙,其中大部分的增长出现于智慧家居、信标、联网家庭和穿戴式装置等应用。本篇思为无线将为大家详细介绍下低功耗蓝牙模块是如何作用于传感器的。
如何使用蓝牙模块BLE5101
BLE5101是一款基于蓝牙协议5.1版本的蓝牙转串口收发模块,工作频段为2.4GHz。具有体积小、功耗低、主从共存等特点。本文将展示如何使用蓝牙模块BLE5101,方便用户迅速上手使用。
低功耗蓝牙模块有什么特点?
低功耗蓝牙(Bluetooth Low Energy)专为物联网无线数据传输而生,在此基础上诞生的低功耗蓝牙模块以其超低功耗、快速连接、容易交互等特点,已广泛应用于物联网蓝牙设备中。本文介绍低功耗蓝牙模块的特点。
思为无线蓝牙模块BLE5101通讯距离测试演示
G-NiceRF思为无线的BLE5101是一款小体积、低功耗、主从角色并存的蓝牙模块,那么这款产品的通讯距离有多远呢?本文就由思为无线小编给大家演示实际测试流程。
电子商城
服务
根据用户的蓝牙模块,使用Bluetooth 蓝牙测试装置MT8852B,测试蓝牙1.0至5.1,包括传输速率、功率、频率、调制和接收机灵敏度,生成测试报告。支持到场/视频直播测试,资深专家全程指导。
实验室地址: 深圳 提交需求>
支持 3Hz ~ 26.5GHz射频信号中心频率测试;9kHz ~ 3GHz频率范围内Wi-SUN、lora、zigbee、ble和Sub-G 灵敏度测量与测试,天线阻抗测量与匹配电路调试服务。支持到场/视频直播测试,资深专家全程指导。
实验室地址: 深圳/苏州 提交需求>
登录 | 立即注册
提交评论