An overview of Power battery heat dissipation
Vehicle and battery energy storage, gain a rapid development opportunity.
And its core component, the power batteries belong to chemical power sources, and they are highly sensitive to temperature, require working in a suitable temperature environment. During the charging and discharging process of power batteries, a large amount of heat is generated due to the internal impedance. Further more, the battery pack is in a relatively enclosed environment. It’s convenient for heat accumulating, arising the temperature , even cause thermal runaway to happen. Therefore, an efficient and safe power battery cooling system has become particularly important.
Currently，there are three battery cooling schemes, respectively as air-cooled, Liquid cooling, direct refrigerant cooling.
The structure is relatively simple and the cost is also low, suitable for scenarios with small battery capacity and low heat dissipation pressure.
In terms of actual usage, liquid media has a high heat transfer coefficient, large heat capacity, and faster cooling speed, so it has a better effect on improving the uniformity of battery temperature. Liquid cooling scheme is currently the mainstream solution.
Direct refrigerant cooling technology can further improve the cooling effect on the battery, but the uniform temperature design of battery evaporators is a technical difficulty. The general requirement is that the temperature difference between the battery cells in the battery system should not exceed 5 ℃ (cooling condition+heating condition). At present, refrigerant direct cooling has not yet become the mainstream design solution in the industry.
Walmate's Battery trays and energy storage liquid pack boxes have become the preferred choice for many new energy vehicle manufacturers, energy storage product manufacturers. At the same time, Walmate also provides professional technical services and looks forward to conducting good technical exchanges with you.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由Ray转载自Walmate Official Website，原文标题为:Power battery heat dissipation ：An overview，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
Key Points in Designing Aluminum Profiles Used in New Energy Vehicles and Energy Storage Battery Packs
The battery pack is a key component of new energy vehicles, energy storage cabinets and containers. It is an energy source through the shell envelope, providing power for electric vehicles and providing consumption capacity for energy storage cabinets and containers. In combination with actual engineering needs, this article summarizes the key points of profile design for battery packs by analyzing the requirements of mechanical strength, safety, thermal management and lightweight of battery packs.
Electromagnetic compatibility for Electric Vehicle Sensors
In a sense, cars are now mobile computers. In modern automotive design, there is hardly a system that‘s not monitored or optimized by technology – sensors included. There‘s no vehicle type where this is more apparent than in electric cars.
A Overview of Cooling Systems for Hydrogen Fuel Cell Vehicles
Hydrogen fuel cells, also known as proton exchange membrane fuel cells (PEMFCs), are widely used in electric vehicle charging stations, automobiles, and other power generation facilities due to their advantages of high efficiency, zero emissions, and zero pollution. Hydrogen fuel cell vehicles emit 3-5 times more heat during operation than traditional fuel vehicles. This article briefly describes the current technology related to hydrogen fuel cell heat dissipation.
How to effectively prevent or reduce the impact of thermal deformation of battery tray welding?
Battery trays, also known as battery boxes or PACK boxes, are increasingly valued as a very important component in the development of new energy vehicles. The design of battery trays needs to balance the relationship between factors such as weight, safety, cost, and material performance. Aluminum alloys are widely used in automotive lightweight engineering because of their low density and high specific strength, which can ensure rigidity while ensuring vehicle body performance.
ElastiSense provides Sensors for off-Road and off-highway vehicles
ElastiSense sensors enable producers and end-users of off-road vehicles to effectively introduce monitoring and predictive maintenance for greater reliability and longevity in these vehicles. These sensors are precise and flexible thanks to ground-breaking ‘active rubber’ sensor technology.
ITT EJCV Electric Vehicle Charging Connector Has A Current Rating Up to 32A
ITT‘S ECJV Electric Vehicle Charging Connector is a IEC (Type 1) vehicle coupler solution that provides low contact resistance and a minimum of 10,000 mating cycles. It has a current rating up to 32A.
Discussion on the Development of Battery Tray for New Energy Vehicles
The three major focuses of current new energy vehicle development - safety, lightweighting, and reliability - are closely related to the battery pack, and the battery housing is the load-bearing component of the battery system, which has a significant impact on the collision, energy consumption, and other aspects of the battery pack and even the entire vehicle.
Vehicle Rental GPS Tracking Management Solution
In response to the management problems of the leasing industry, SKYLAB has specially developed and provided a vehicle leasing GPS tracking management solution.
Shindengen D3CE20LUS Ultrafast Recovery Diode Added to the Lineup for Large Current Compatible, Compact, Thin SC-110 (CE) Package for Vehicle Applications
Shindengen has added the D3CE20LUS high withstand voltage ultrafast recovery diode to the lineup of the large current compatible, compact, thin SC-110 (CE) package for vehicle applications, in response to greater demand for smaller space requirements and lighter weight components.
Eaton Introduces Higher Power Fuses for Electrified Commercial Vehicles
Intelligent power management company Eaton today announced it is now offering a portfolio of fuses for commercial electrified vehicles (EVs). Eaton Bussmann series fuses can handle up to 1,400 amps and 900 volts and can be tailored to customer specifications. Eaton can increase current capability by either design modifications or paralleling multiple fuses. The fuses will be on display in Eaton’s booth at the largest advanced commercial vehicle technology show, ACT Expo, held May 20-23 in Las Vegas, Nevada.
Optimizing Fast Charging with Electric Vehicle Sensors
Fast-charging technology is making this shift possible as it meets a major concern head-on. Electric vehicle sensors are the unsung hero in making EV charging as uneventful as filling up a gas tank.
The Application of IGBT in the Electronic Control System of New Energy Vehicles and Its Heat Dissipation Technology
The main heating device in the electronic control system of new energy vehicles is the inverter, which converts the direct current of the battery into alternating current that can drive the motor. During this process, the IBGT in the inverter will generate a large amount of heat. To solve the heat dissipation problem of these devices, this article will introduce the working principle of inverters and advanced liquid cooling heat dissipation technology.
Mitsumi Has Developed CMI-BD001 Standard Type Onboard Interface Connection Unit for Vehicle Market
There has been a rapid shift in the vehicle market to offer connectivity with portable data devices such as smartphones, tablets, digital audio players and other equipment. Interface connection units that connect to vehicle head units are a connecting box that make it possible to read information data from such portable data devices, and there are an increasing number of examples of onboard vehicle installations.To address this demand, Mitsumi has developed the ＜CMI-BD001＞ standard type onboard interface connection unit.
Electric Vehicle Malfunctions Due to Lack of Fuses or Diodes
With the development of life, electric vehicles have also become popular. In order to facilitate people‘s travel, many families have started to use electric vehicles, which are convenient and affordable. However, there are still many unknown problems that arise during use. Today, the editor will briefly talk about the structural issues of electric vehicles.
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论