GRL Designed the Busbar System Distribution Cabinet for S.c New Energy in The “Jinergy 720mw Perc Solar Module Production Line”
Project Introduction
S. C New Energy builds 720MW PERC solar module production line for Jinergy Co.ltd.In this project, Jinleiler busbar system products are used in the power distribution cabinet.
S.C New Energy is the largest manufacturer of photovoltaic solar panel production lines in China. GRL and S.C New Energy have been partners for ten years.
GRL designed the busbar system distribution cabinet for S.C New Energy in the "Jinergy 720MW PERC solar module production line".
Busbar System Distribution Cabinet
The 800A molded case circuit breaker is used as the main switch, and 6 pieces of 400A MCCB are used as the branch switch.
The proportion of copper bars in the system is very high, and copper bars are used to connect different types of components. GRL customized a 1.5-meter-long soft busbar to connect the upper and lower busbar systems.
The width of the busbar system distribution box is 80cm, which takes up less space.
When the busbar system power distribution cabinet fails, the faulty components can be quickly replaced without even powering off.
Customer Application
Both S.C New Energy PD-420 and PD-520 use GRL busbar system distribution cabinets.
GRL and S.C New Energy are stable partners, GRL provides busbar systems to S.C New Energy for more than $200,000/year.
Partners: S.C New Energy Technology Corporation
Address: GuangDong,China
- |
- +1 赞 0
- 收藏
- 评论 0
本文由梨花落风转载自GRL Official Website,原文标题为:Photovoltaic solar panel production line project,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
GRL Busbar System Empowers Alibaba‘s Langfang Big Data Center, Promoting Cloud Infrastructure in The 5G Era
GRL, a third-tier supplier to Alibaba, provided compact three-phase busbar systems for the Langfang Big Data Center to meet small space and multi-circuit needs. The system ensures quick backup circuit activation upon main circuit failure, addressing Alibaba‘s challenge of high space requirements and potential losses.
GRL Innovative Busbar System Powers Cutting-Edge X-ray Free Electron Laser Facility by CAS
The Chinese Academy of Sciences‘ X-ray Free Electron Laser Test Facility (SXFEL), jointly built with Peking University, uses GRL‘s innovative electrical busbar system for power distribution. The system addresses non-standard panels and component incompatibility issues, offering a standardized AC distribution box with ABB MCBs, improving maintenance efficiency and safety.
GRL Electric‘s Busbar System Distribution Box: Addressing Pudong Airport T2‘s Power Distribution Challenges
GRL Electric provided a non-standard Busbar System Distribution Box for Pudong Airport T2, which has an annual passenger throughput of over 50 million. Addressing the challenge of 8,000+ non-standard boxes, GRL designed a standardized busbar system for faster maintenance, safety, and modular space-saving solutions.
GRL Company Mainly Supplies New Energy Business, Mainly The Busbar System of Power Distribution Box
CHN ENERGY, established through the merger of China Guodian Group and Shenhua Group, operates in multiple business segments. GRL company, a supplier of new energy business, offers busbar systems with unique appearance patents and various sizes. GRL provides special and general adapters, supports, and metal cable clamps for convenient and efficient wiring.
GRL Industrial Busbar System Promotes The Opening of Shanghai Metro Line 13
CRRC, a leading rail transit equipment supplier, faced challenges in the excavation project of Shanghai Metro Line 13‘s extension. GRL provided an electrical busbar system for CRRC‘s shield machine, addressing space constraints and complex circuit designs. Our engineers integrated MCBs, terminal blocks, and copper bars into a compact control cabinet using a 160-amp fuse switch. The design reduced space occupation and ensured maintenance convenience. GRL‘s 3-phase busbar panel was used in the third-phase project, covering 5.254 kilometers and opened in 2018.
GRL Supplied 40,000 Busbar System Adapters in 8,000 Cable Branch Boxes, Built a Better Electrical Control System for Farmland Irrigation
GRL‘s distribution box with a busbar system has been applied to farmland irrigation in Shandong, China. The “Jijingtong“ project enables farmers to use electric pumps, saving 2.5 billion RMB annually in irrigation costs. GRL designed the box with no exposed conductors, reducing electric shock risks. The project covered 101 counties and provided water to 420,000 wells.
GRL Developed the Busbar Branch System for China Railway Group, Which Increased the Production Speed of China Railway Group’s Power Distribution Box by More Than 50%
China Railway Engineering Group Limited, a top construction unit in China, faced challenges in producing power distribution cabinets due to the high precision required for copper bars. GRL Electric developed a standardized copper busbar system that solved this problem by processing copper bars to specific sizes and connecting them with busbar clips, eliminating the need for secondary processing and punch holes. The system increased production speed by over 50% and reduced labor costs. China Railway Group is now promoting this system to more cabinet types.
GRL Designed a Busbar-type Standardized Power Distribution Cabinet in the Newly Built Jinlong Automobile Factory, Which is Easier to Maintain
The automobile production line is divided into four links: stamping, welding, spraying and assembly. The electronic control system controls the stamping line, the welding line and the spraying line, in the automated workshop. When the production line fails, it can cause huge losses, because the value of the car is high.GRL designed a busbar-type standardized power distribution cabinet in the newly built Jinlong Automobile Factory, which is easier to maintain.
State Grid‘s Power Distribution Upgrade used GRL‘s Fuse-links, Switches, and Busbar Systems
State Grid Corporation of China, the largest grid builder and operator in China, uses GRL products including fuse-links, isolator switches, and busbar systems for safer power distribution boxes. GRL provides a range of fuse coverage for different currents and adopts derating treatment in plateau areas. Toughened DMC materials are used for fuse disconnectors in complex environments. GRL also assisted in launching an integrated solution for transformers and integrated distribution boxes, with busbar systems available in different sizes for energy distribution.
昂宝电子PD3.1协议芯片OB2623通过第三方实验室GRL测试,支持EPR 28V输出应用
昂宝电子On-Bright宣布,其推出的PD3.1协议芯片OB2623已通过第三方实验室GRL的严苛测试,正式取得USB协会的官方认证,TID:7930。该芯片最高输出电压支持到28V,最大功率支持到140W,支持PD3.1 PDO/PPS/EPR 3.3V~28V,并兼容QC4+等通用快充协议,内嵌MCU可灵活对应PD协议层及VDM客制化定义,极具设计弹性。
Introduce What are Fuse Disconnect Switches and DNH1 Electronic Fuse Monitoring Device
Knife fuse switches, also known as fuse disconnect switches, are an switching appliance composed of a circuit breaker and a fuse. It is a multi-pole manually operated switch with a shell made of P0 grade flame retardant material. It has high flame retardant performance, protective capabilities and reliable operating safety.
RT18 系列熔断器式隔离器
型号- DN56110,DN56132,DN56112,DN56111,RT18-63,DN56133,DN56171,DN56130,DN56118,DN56117,DN56119,DN56114,DN56113,DN56135,DN56116,DN56138,RT18,DN56115,DN56137,DN56121,DN56143,RT18-32,DN56120,RT18 系列,DN56123,RT18-125,DN56122,DN56140,DN56124,DN56168
GRL熔断体选型表
GRL提供刀型触头熔断体/双指示刀型触头熔断体/圆筒形帽熔断体/太阳能光伏系统保护用熔断体/半导体设备保护用熔断体/半导体设备保护用熔断体/电池和电池系统保护用熔断体选型:电流:1A-5550A,分断范围及使用类别:aR/aBat/gG/gPV,分断能力:20-250KA。
产品型号
|
品类
|
电压
|
电流
|
分断范围及使用类别
|
分断
能力
|
RT18-63(RO16)-8A/690V
|
圆筒形帽熔断体
|
690VAC
|
8A
|
gG
|
50KA
|
选型表 - GRL 立即选型
【电气】金莱勒AC 1800V熔断器式隔离开关卓越立世!为风力发电场景提供稳定分断保护
在风力发电场景中,随着风力发电功率的提升,电压也逐渐升高至AC 1800V,对开关设备保持高分断能力提出了需求。为应对这一挑战,金莱勒GRL推出了DNH1-630/30GU型熔断器式隔离开关。该产品内置的熔断器,能够在AC 1800V高电压环境下提供稳定的分断保护。
电子商城
登录 | 立即注册
提交评论