Types and Specifications of LED Lamp Beads

时间： 2024-11-28 来源：Bestopto Official Website

代理服务

技术支持

现货查询

批量订货

First, the light emitting principle of LED lamp beads:

The terminal voltage of the PN junction forms a certain potential barrier. When the forward bias voltage is applied, the potential barrier decreases, and the majority carriers in the P and N regions diffuse to each other. Since the electron mobility is much larger than the hole mobility, a large number of electrons will diffuse into the P region, constituting the injection of minority carriers in the P region. These electrons recombine with holes in the valence band, and the energy obtained during recombination is released in the form of light energy. This is how the PN junction emits light.

There are three types of LED lamp beads:

1. Inline low power specifications include: straw hat/helmet, round head, concave, oval, square (2 * 3 * 4) bullet, flat head, (3/5/flat head/bread type) piranha, etc.

2. SMD patches are generally divided into (3020/3528/5050 these are front-emitting) / 1016/1024 etc. These are side-emitting light sources.

3. High-power LEDs cannot be classified into the SMD series. Their power and current use are different, and the photoelectric parameters are very different. If a single high-power LED light source is not equipped with a cooling base (usually a hexagonal aluminum base), its appearance is not much different from that of ordinary patches. The high-power LED light source is round, and the packaging method is basically the same as that of SMD patches. However, it is essentially different from SMD patches in terms of use conditions/environments/effects.

What are the models of LED chip beads?

3014 belongs to low power, each 0.1W, the use current is 30mA, because the bottom is used for heat dissipation, it is larger than the conventional low power current

2835 belongs to low power, each has 0.1W and 0.2W, and the current is 30mA and 60mA. Because the bottom heat dissipation is used, the heat dissipation area is larger than 3014, so the current can also be larger. Of course, the chip size must also be considered. , Also someone made 0.3W and 0.5W

3528 is a conventional low power, each 0.06W, the use current is less than 20mA

5050 belongs to the conventional low power, each 0.06 * 3W, the use current is within 20 * 3mA, there are three chips inside, so the current is three times that of the conventional

5730 (5630) belongs to Samsung's high-power structure, each 0.5W, the use current is 100-150mA

3030 belongs to Cree's high-power structure, each 1W, using current of 300-350mA, this structure also has 3W lamp beads (actually 2W, current 600mA)

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由雪飘梦飞转载自Bestopto Official Website，原文标题为:Types and specifications of LED lamp beads，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Selection Tips for LED Lamp Beads and Lamps?

The light sheet refers to an LED backlight source. The first LED backlight product uses LED lamp beads.LED lamp beads are the abbreviation of LED for short, which is a popular name.Selection skills1. Brightness LEDs have different brightness and different prices. LEDs used in LED luminaires shall meet the Class I standards for laser class.2. Antistatic ability LEDs with strong antistatic ability have a long life and therefore high price. Generally, LEDs with an antistatic greater than 700V can be used for LED lighting.3. LEDs with the same wavelength and wavelength have the same color. If the

2024-11-29 - 技术探讨代理服务技术支持批量订货

What is the Meaning of LED Lamp Beads Number 3528/5050

It is mainly a representation of the specifications and dimensions: 35mm * 28mm, 50mm * 50mm are different in size, and the power is also different. In the application of the patch, 3528 has no 5050 advantage in terms of brightness or life, same.

2024-11-28 - 技术探讨

Which is Better, LED Lamp Beads and SMD SMD LEDs?

From the packaging volume points: 3528, 2835, 3535, 5050, 5630, and so on. It is widely used in lighting fixtures. The processing method is generally: reflow soldering. (Divided into low temperature welding, low temperature welding, high temperature welding) In addition, the gap of the chip LED is generally negative. (Depending on the packaging method, it will change.) SMD lamp beads are cheap and can be mass-produced； high-power lamp beads have high brightness, long life and convenient DIY.

2024-11-28 - 技术探讨代理服务技术支持批量订货

How to Detect and Replace the LED Lamp Beads?

This article is an introduction to how to detect and replace the LED lamp beads.

2024-11-28 - 设计经验

How are Small LED Lamp Beads Made?

This article introduces how are small LED lamp beads made.

2024-11-28 - 设计经验代理服务技术支持批量订货

Are LED Lamp Beads more Power Efficient than LED Bulbs?

Should it mean high power LED lamp beads and low power LED bulbs? In fact, the so-called high-power and low-power refers to a single LED light-emitting body (chip), the power of the overall lamp depends on the total number of these LED chips.

2024-11-29 - 技术探讨代理服务技术支持批量订货

【技术】一文详解侧发光贴片LED和直发光LED的区别以及侧发光贴片LED灯珠的特点和应用领域

本文又福特电子分享关于侧发光贴片led和直发光的区别以及侧发光贴片led灯珠的特点和应用等相关内容。扩散片与LED光源之间预留一定的空间，提高亮度均匀性，故直下式背光源也同时增加了模组的厚度、重量、耗电量。

2023-01-01 - 原厂动态代理服务技术支持批量订货

福特电子（Bestopto）是一家拥有多项LED相关技术的封装及制造商，采用先进的LED自动化生产设备，主要生产贴片LED、侧发光LED 、双色LED 、三色LED灯珠；新研发小尺寸0201贴片LED、0404双色LED、0601侧发光LED灯珠。

侧发光LED灯珠双色贴片LED灯珠 RGB及三色贴片LED灯珠单色贴片LED灯珠单闪 LED 自闪 LED 球头LED 发射管和接收管大功率LED灯珠灯具 LED

代理服务线上商城技术资料

What are the LED Lamp Bead Assembly Processes

It‘s introduced the LED lamp bead assembly processes.

2024-11-30 - 设计经验

福特电子侧发光LED灯珠选型表

福特电子提供以下技术参数的侧发光LED灯珠选型，波长460nm~630nm,电压1.8V~3.7V，亮度25mcd~800mcd,瞬间点亮（<100奈秒）。

产品型号	品类	颜色	规格（mm）	波长（nm）	正向电压@20mA(V)	亮度@20mA(mcd)
FT-0601CWAY1UDA-C	侧发光LED灯珠	白色	1.7mmx1.1mmx0.3mm	2200nm~25000nm	2.8V~3.2V	300mcd~350mcd