What Aspects Should Be Paid Attention to when Choosing Fiber Optic Adapters?
The fiber optic adapter is an optical movable connector pair connecting components. The fiber optic adapter can precisely butt-joint two end faces of the optical fiber, so that the optical energy output of the transmitting optical fiber can be coupled to the receiving optical fiber to the maximum extent, and the same or different optical fiber connectors can be butt-jointed so that the optical path is smooth with little loss. So how do we choose Fiber Optic Adapters?
Flame retardant level of the fiber optic adapter
Flammability
UL94 grade is the most widely used flammability performance standard
for plastic materials. It is used to evaluate the ability of the
material to extinguish after being ignited. There are a variety of
judging methods such as burning speed, burning time, anti-drip ability, and whether the drip beads burn.
HB, V0, V1, and V2 are different flame-retardant grades. For different grades, different testing methods for flame resistance, and different criteria for testing and determination are adopted, and the flame-retardant grades increase from HB, V-2, V-1 to V-0 step by step.
Insertion loss of the fiber optic adapter
Generally, the insertion loss should be less than 0.2dB. If the insertion loss is too high, the optical transmission will be affected.
Repeatability of the fiber optic adapter
The fiber optic adapter needs to be inserted and removed frequently in the service process. Therefore, the durability of the fiber optic adapter requires high requirements. In normal standards, the fiber optic adapter can be inserted and removed more than 500 times without affecting the performance without changing the insertion loss.
Operating temperature of the fiber optic adapter
The normal operating temperature of a fiber optic adapter ranges from -40℃ to 75℃, while that of an LC adapter ranges from -40℃ to 85℃.
The material of the alignment sleeve of the fiber optic adapter
The alignment sleeve is the most important component of the fiber optic adapter. It is usually made of metal or ceramic. Because the crystal structure of ceramics is hard and not easy to deform, fast alignment and high precision butt jointing of fiber end can be realized.
The above is all the content about how to select the fiber optic adapter. When choosing the fiber optic adapter, the above important properties can be used to select the relatively high quality and stable fiber optic adapter. Of course, there are other factors that affect the quality, such as tensile strength, compliance standards, etc.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由出山转载自T&S News，原文标题为:What Aspects Should Be Paid Attention to when Choosing Fiber Optic Adapters?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
How to Plan the Future 5G Fiber Network?
Based on T＆S Communications’s excellent comprehensive capabilities, T＆S Communication is dedicated to bringing fiber optical components with superior performance to next-generation communications in a green, pragmatic, and cost-effective manner.
What Are the 40G QSFQ+ Fiber Optical Transceivers and Their Differences?
40G networks are widely used in data centers. 40G fiber optical transceivers are the mainstream devices for interconnection between data center equipment. So what are the main types of 40G fiber optical transceivers? What are the differences between them?
Type Selection and Application of Fiber Transceiver
Although optical modules are a trend to replace fiber transceivers, there is still a relatively large user base for fiber transceivers. For example, fiber transceivers are still commonly used transmission products in monitoring systems.
太辰光（T&S）光纤连接器选型指南
目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC
型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC
TSQS-851HG-XXXC 100G QSFP28有源光缆
描述- 本资料介绍了TSQS-851HG-XXXX型号的四通道全双工主动光缆（AOC），适用于100G以太网和InfiniBand FDR/EDR应用。该产品符合IEEE 802.3bm标准，采用QSFP28接口，支持多模光纤系统，具有低功耗、宽工作温度范围等特点。
型号- TSQS-851HG-XXXC
TSQM4-NCNGE3C光端机单模40GBase收发器，带诊断监控双工QSFP+PSM4 10km收发器
描述- 本资料介绍了一种四通道全双工光收发器模块，适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道，每个通道可达到11.2Gbps的传输速率，总数据率为40Gbps，使用单模光纤可传输10km。模块具有低功耗、热插拔QSFP形式因素、内置数字诊断功能等特点。
型号- TSQM4-NCNGE3C
太辰光（T&S）光纤通信产品选型指南
目录- 公司简介 陶瓷插芯 常规光纤连接器 IEC分级跳线 MPO/MTP多芯连接器 机箱和模块盒 标准测试线 保偏光纤连接器 光收发组件 高速光模块/AOC线缆连接方案 光纤回路器/衰减器 连接头/适配器/终端器 熔融拉锥耦合器和PLC光分路器 波分复用器 光模块及有源光缆 高速线缆 光纤光栅
型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM
TSSP-8525G-XXXC 25G SFP28有源光缆
描述- 该资料介绍了TSSP-8525G-xxxx型号的25GSFP28 Active Optical Cable。这是一种直接连接的光纤组件，具有SFP28连接器，适用于短距离连接，特别适合机架内和相邻机架之间的连接。它支持高达25.78 Gbps的数据速率，并符合SFP28 MSA和IEEE 802.3by 25GBASE-SR标准。
型号- TSSP-8525G-XXXT,TSSP-8525G-XXXC
TSQM4-NCNGD3C光端机单模40GBASE收发器，带诊断监控双工QSFP+PSM4 2KM收发器
描述- 该资料介绍了一种四通道全双工光模块，适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道，每个通道的数据传输速率可达11.2Gbps，总数据率为40Gbps，使用单模光纤可传输2公里。模块具有低功耗、热插拔QSFP形式因子、内置数字诊断功能等特点。
型号- TSQM4-NCNGD3C
TSPA-85192-XXXC 10G SFP+有源光缆
描述- 该资料介绍了TSPA-85192-xxxx型号的10G SFP+ Active Optical Cable。这是一种直接连接的光纤组件，具有SFP+连接器，适用于短距离连接，特别适合机架内和相邻机架之间的连接。它支持高达10.3125 Gbps的数据速率，并可在多模光纤系统上运行。
型号- TSPA-85192-XXXC
TSSLS-NFNCK8C光端机1550nm SFP+单模收发器，带诊断监控双工SFP+80km收发器
描述- 本资料介绍了一款1550nm单模SFP+光收发器，适用于10Gbps传输速率，支持80km光纤距离。该产品符合SFF-8472标准，具备高灵敏度APD光电二极管和TIA，支持数字监控功能，适用于10GBASE-ZR/ZW和10G Fiber Channel等应用。
型号- TSSLS-NFNCK8C
What is WDM?
Wavelength Division Multiplexing (WDM) is a technique in fiber optic transmission for using multiple light wavelengths to send data over the same medium. Two or more frequencies of light can travel along one fiber, and multiple signals transmit in an optical waveguide at different wavelengths.
TSSLS-DXXCK8C光端机DWDM SFP+单模收发器，带诊断监控双工SFP+80KM收发器
描述- 本资料介绍了一种10Gbps SFP+单模光纤收发器，适用于80公里距离的数据传输。该收发器符合SFP+ MSA标准，具备高数据速率、低功耗、宽工作温度范围等特点，适用于10GBASE-ZR/ZW、10G Fiber Channel等应用。
型号- TSSLS-DXXCK8C
Five Tests to Ensure the Fiber Patch Cord Quality
The quality of fiber patch cords affects the entire fiber-optic link. Each fiber patch cord must be strictly tested before leaving the factory. So what tests will a fiber patch cord manufacturer do to ensure the high quality of patch cords?
电子商城
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论