What Goes into a MIL-SPEC COTS EMC-Input Filter for a DC-DC Converter

时间： 2023-04-24 来源：P-DUKE News

技术问答

选型帮助

研发客服

商务客服

The switching action of DC-DC converters can cause undesired common-mode and differential-mode noise, creating interference at unacceptable levels at many points along the frequency spectrum. Front-end (or power-line) filters are intended to be used before DC-DC converters to mitigate electromagnetic interference (EMI). These can be custom-designed or purchased off the shelf to enable a design with a vendor’s switched mode power supply (SMPS) or DC-DC converter to meet electromagnetic compatibility (EMC) regulatory standards for conducted and radiated emissions (e.g., FCC, ETSI, CISPR, MIL-SPEC, etc.).

These off-the-shelf front-end filters are custom-designed, based on the electromagnetic signature of the power conversion equipment. However, an additional level of electrical (e.g., voltage spikes, ripple), mechanical (e.g., vibration, shock), and environmental (e.g., high altitude) design constraints must be considered in order to meet the needs of military equipment. This article discusses the design considerations of front-end filters and the testing requirements for military-grade equipment DC-power modules.

What is a front-end filter?

The design of this input filter is critical in order to meet electromagnetic compatibility (EMC) standards and targets. Front-end, or input filters, are used for multiple purposes:

Suppressing noise and surges that might enter the first stage of the power supply and,
Decreasing emitted noise at both the fundamental frequency (i.e., switching frequency) and its harmonics

Switched-mode power supplies are increasingly utilized in electronics and come with rich spectral content that could both conduct to other parts of the circuit through physical contact and interfere with sensitive circuits nearby. Noise becomes an increasing concern with higher switching speeds, particularly where transistors that turn on and turn off rapidly can cause interruptions in current flow (which leads to voltage spikes and high-frequency noise). These interruptions in current flow can be found at the input side of buck converters, at the output side of boost converters, and at both the input and output of flyback and buck-boost converters.

Noise sources in various voltage regulators

The input side of the DC/DC buck converter features rapid turn-on and turn-off of their switching devices, causing discontinuous currents that have sharp rising and falling edges (high di/dt) on the input capacitors. This will result in the fundamental frequency and several harmonics (often the low-order ones) falling out of compliance. A boost converter operating in continuous conduction mode (CCM) will experience EMI at its output due to the need for fast reverse recovery diodes which, while greatly reducing power losses, will have a much more aggressive change in current (di/dt) and will increase EMI. In discontinuous conduction mode (DCM), the primary current ripple is greater. The ripple will create a varying signal that is conducted to other parts of the system through conductors that share a common contact.

EMI: Radiated and conducted emissions

Generally conducted emissions are associated with frequencies below 30MHz, whereas radiated emissions generally fall into frequencies beyond 30MHz (often 50 to 300MHz). There are, however, still overlaps between both conducted and radiated emissions. In a switched-mode power supply, voltage surges (high dV/dt) are typically sources of radiated emissions. As stated earlier, conducted EMI typically stems from discontinuous current (high di/dt) and can be broken down into both common-mode (CM) and differential mode (DM) noise.

Differential- and common-mode noise

DM currents are generally dominated by di/dt and will flow between the power supply line and the return path; DM noise dominates lower frequencies. It generally is difficult to change the behavior of di/dt without fundamentally changing the circuit. The reduction of di/dt is typically accomplished through the use of a passive low-pass EMI filter (e.g., R-C snubber, L-C, Pi-section, T-section, etc.) to dampen oscillations caused by discontinuous currents.

CM currents are generally a function of dV/dt and will flow between each of the power lines and ground. When CM currents couple into long conductors or cabling, the cabling can act as an antenna that makes CM noise more dominant at high frequencies. Depending on cable length and the distance between conductors and the reference ground plane, the loop area for unintended return paths can be considerably large. CM can be suppressed significantly with effective layout design like moving conductors closer to a reference ground plane, carefully deploying safety capacitors, shielding connected cable harnesses, or placing a CM choke in the path of CM currents. A CM choke also provides a high-impedance series path that allows CM currents to flow out of the converter with Y-capacitors that form a shunt path to EMI ground.

Both DM and CM will contribute to EMI and, oftentimes, both DM and CM noise components need to be quantified before designing the EMI filter to meet industry EMC standards. Input EMI is typically quantified using a line impedance stabilization network (LISN) at the device under test (DUT’s) input as well as a spectrum analyzer.

Design considerations of front-end filters

Generally, passive EMI filtering is the most common approach for noise mitigation; however, it can prove difficult when the filters are terminated with varying noise sources in an SMPS and different load impedances. These filters are generally various arrangements of resistors, capacitors, and inductors. The magnitude of the fundamental component and the first couple of harmonics is the largest and will contribute the most to the overall noise, while the magnitude of higher-order harmonics will taper off as frequency increases. The filter’s ability to attenuate these noise components also rises over frequency, so mitigating noise at the fundamental frequency and lower-order harmonics is a prominent design challenge.

Generally, large passive filters mitigate the lower-frequency emissions; however, higher-frequency emissions might require additional design considerations due to their parasitic nature (e.g., a capacitor’s equivalent series resistance and inductance (ESR/ESL) and an inductor’s parallel capacitance). Other EMI filtering techniques often involve active components: one such technique is using spread spectrum, or dithering, to modulate the switching frequency of the power supply to reduce the peaks found in the frequency domain at the fundamental frequency and low-order harmonics. Ultimately, the technique deployed depends upon the unique noise signature of the SMPS as well as the cost, size, and regulatory constraints on the design.

Beyond meeting EMC regulatory standards, EMI filters may also contain the ability to attenuate high-current transients that are reflected from the load to the input power of the SMPS. The predicted transient characteristics of each SMPS will vary and, therefore, a custom design is often required to sufficiently suppress surges. This is certainly an additional design consideration for MIL-SPEC power electronics. Military-based equipment will come with a slew of electrical, mechanical, and environmental design considerations that cause manufacturers to carefully design power electronics from the ground up -- materials vetting and electrical, mechanical, and harsh environmental performance requirements must all be met.

A look at common military standards for power supplies

The MIL-STD-461 sets conducted and radiated emission limits on electrical equipment with guidelines for properly measuring EMI. If the SMPS exceeds these limits -- and it often does -- it will require an EMI filter to bring it “back into spec.” However, choosing any off-the-shelf EMI filter will not necessarily cause the power supply to suddenly conform to standard requirements; the equipment can be so noisy that tacking on any EMI filter to the input still causes the part to fail. The various requirements of MIL-STD-461 and their descriptions can be found in Table 1. Electronic equipment that meets the MIL-STD-461 will typically list out the specific CE, CS, and RE requirements met.

EMI is not the only consideration in regard to the proper performance, reliability, and safety of electronics. Power supplies must also be able to operate under various voltage conditions including reverse polarity, voltage spikes, and voltage surges. The MIL-STD-1275E standard provides the test conditions to be applied to the input of a 28V electrical power system, as well as the expected performance parameters of said equipment. These systems are expected to be in military ground vehicles, civilian off-road vehicles, as well as military and civilian heavy equipment.

Other military standards -- such as the MIL-STD 704F standard for aircraft electrical power characteristics and the DO-160G for Airborne Equipment -- will specify the environmental conditions and test procedures to adequately simulate various voltage conditions. The MIL-STD-810 standard includes test conditions and requirements for equipment that will undergo mechanical shock, vibration, and high altitudes. These may also be necessary considerations to ensure the longevity and reliability of the supply in harsh environments. Power supplies operating in military vehicles and in airborne systems will likely need to meet the MIL-STD-1275E/MIL-STD 704F, MIL-STD-461 and aspects of MIL-STD-810 to be deemed suitable for use. P-DUKE offers a line of MCF MIL-SPEC front-end filters that can be matched with select DC/DC converters to meet all of these specifications.

P-DUKE MCF series

The MCF series provides both EMI filtering and transient protection to meet conducted emission, conducted susceptibility, and radiated emission requirements per the MIL-STD-461G standard, surge/spike requirements found in numerous military standards, and altitude/shock/vibration requirements in MIL-STD-810 (Table 2).

The series offers active input over-voltage protection which clamps over-voltages up to 100V with a maximum duration of 50ms to a safe level of 40V and absorbs +/-250V spikes with the internal protection circuits (Figure 1).

As shown in Figure 2, the series includes other active protection functions, such as remote on/off control, overload protection, output short-circuit protection, reverse polarity protection, inrush current limitation, and more.

Considerable EMI improvement can be seen in Figure 3, where the 200W HAE200 DC/DC converter’s EMI performance was tested before and after applying the MCF filter. This greatly reduces the cost and design effort that comes with a custom EMI filter and peripheral circuits. With a rated power of up to 250W, the MCF front-end filters can be leveraged for a wide range of military equipment.

MCF filters allow for seamless integration into military systems

EMI filters cannot simply be arbitrarily selected to allow a power supply to fall into compliance, and the process of designing these filters can be quite complex with a high non-recurring engineering (NRE) cost. This is especially the case with military-grade equipment where onboard subsystems in military vehicles and aircraft that are powered by a 24V battery or 28V generators have stringent requirements on multiple dimensions where COTS equipment and custom solutions may not be viable. P-DUKE offers DC-DC converters in a range of 15W to 250W that, when matched up with the relative MCF front-end filters, will meet military requirements for EMC and surge suppression.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由玄子转载自P-DUKE News，原文标题为:What goes into a MIL-SPEC COTS EMC-Input Filter for a DC-DC Converter，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

What Is The Purpose of MOSFET?

MOSFETs (Metal-Oxide-Semiconductor Field-Effect Transistors) are widely used in electronic circuits. Due to their high input impedance, low power consumption, and fast switching speeds, MOSFETs play a crucial role in modern electronic devices. This article will explore the main applications of MOSFETs and their use in various fields.

技术探讨发布时间 : 2024-10-17

The Role of EMI Filters in Power Electronics

EMI filters are designed to keep internally generated electrical noise from conducting across the system and negatively impacting operations elsewhere. In other words, they contain and manage noise. In power electronics, they take the form of power line filters that protect the line from upstream noise.

技术探讨发布时间 : 2024-08-01

千如电子（ABC-ATECH）SMD贴片电感器件选型指南（详细版）

目录- Company Profile SMD Inductive Component Transformer SMD Inductive Component part Naming rules RF Ceramic Wire/Ferrite wire Wound Chip Inductor Multilayer Chip Inductor Multilayer Chip Bead Wound Chip Inductor Power Bead Non-Shielded SMD Power Inductor Semi-Shielded SMD Power Inductor Shielded Molded SMD Power Inductor Shielded SMD Power Inductor Through Hole Inductor SMD Line Filter DIP Line Filter SMD Inductive Component Packing Information

型号- BF0703150MS□-□□□,SF1278,MH16081N0DL□-□□□,SF0502142YLB,MB1608301YS□-□□□,SF1258681MS□-□□□,UF09V2103YL□,SR0302151KL□-□□□,TPI3015CT180□-□□,PQ2625,SQ45324R7ML□-□□□,QS6822821ML□-□□□,CU10486R8YF□-□□□,SS0805150MF□-□□□,SS0604471KL□-□□□,RN1060150ML□-□□□,QS3818680ML□-□□□,SS1240 SERIES,SS1806 SERIES,PB1109R27MS□-□□□,SWI0201CT 5N3 □-□□,QS SERIES,SS70324R7ML□-□□□,SS1280120MF□-□□□,RC1008102KL□-□□□,SS1206221KP□-□□□,MH160868NJL□-□□□,SR0503271KL□-□□□,HE06306R8ML□-□□□,RB0608220KL□-□□□,SS7032680ML□-□□□,SWI1210FT2R7□-□□,SR1006560KL□-□□□,SS7045331MS□-□□□,BS0906181YL□-□□□,HC0520 SERIES,SS0908390ML□-□□□,MH16082N7DL□-□□□,TPI6045CT220□-C1-□,RB0914821KL□-□□□,SS1240391KL□-□□□,SS0906680ML□-□□□,SR0603270ML□-□□□,TPI3015CT680□-□□,SS1280180MF□-□□□,SQ45321R5ML□-□□□,SQ5650332KL□-□□□,SWI0805CTR39 □-□□,SR0602180ML□-□□□,BS0704220MS□-□□□,HE06306R8MS□-□□□,CU1048150YF□-□□□,BF07031R5MS□-□□□,MU1005331YS□,HE12507R8MS□-□□□,TPI3015CT101□-□□,SS1806471ML□-□□□,SB7045150ML□-□□□,SR0603101KL□-□□□,SF0504 SERIES,SS1258820MF□-□□□,CU8048101YL□-□□□,HE0630R36ML□-□□□,PB1012 SERIES,SQ56504R7ML□-□□□,BF07036R8MS□-□□□,RB06081R5ML□-□□□,MH160815NJL□-□□□,SS1278101MF□-□□□,CM4532561□S□-□□□,SU1040331YF□-□□□,SU8043100YF□-□□□,SU1048100YF□-□□□,MU1005600YS□-□□□,PWC0603ST121S-□□,RB0608470KL□-□□□,BS0906472YL□-□□□,HE0630R47MS□-□□□,SS7032150ML□-□□□,HCI0805FT1R0 □-□□,PB1308,SU6018220YF□-□□□,MU1608101YS□,CU8030470YL□-□□□,CU1206681ML□-□□□,MH160862NJL□-□□□,SR1006332KL□-□□□,SS0604221KL□-□□□,SS1260470MF□-□□□,CU1206330ML□-□□□,SF0602331YL□-□□□,SB16083R3M2□-□□□,QS6828470ML□-□□□,HC SERIES,BF0703101MS□-□□□,UF09V2202YL□-□□□,CM3225R12□S□,MU1005 SERIES,SR0805 SERIES,SB7030680KL□-□□□,SR0906180ML□-□□□,SS1260271KF□-□□□,CU10481R5YF□-□□□,MU2029102YS□,SF1258,SR1006392KL□-□□□,SB2207101KL□-□□□,QS5818180ML□-□□□,CU1048101YF□-□□□,CM4532R82□S□-□□□,CU8048150YL□-□□□,SQ4532220KL□-□□□,SS1206820YP□-□□□,HE0420R10MS□-□□□,HE0630R47ML□-□□□,SS1608681ML□-□□□,RN80401R0YLB-□□□,CU1206390ML□-□□□,SS0908330ML□-□□□,HS0735220MS□-□□□,SU50282R2YL□-□□□,CM4532270□S□-□□□,SB18061R0ML□-□□□,RB0712391KL□-□□□,HE06301R5ML□-□□□,RB1314100ML□-□□□,SWI0603CTR22□-□□,SS1240331KL□-□□□,SU5018470YL□-□□□,RB0812561KL□-□□□,SQ56501R5ML□-□□□,SU80303R3YF□-□□□,RB1010151KL□-□□□,SWI0603CT3N9□-□□,HE0618R10MS□-□□□,SS1005272KL□-□□□,SWI0201CT 2N5 □-□□,TPI5040,TPI4025CT2R2□-□□,SWI0402HP22N□-□□,SWI1008HQ56N□-□□,SF0502251YL□-□□□,SWI1008CTR39 □-□□,HS07352R2ME□-□□□,BS0704560MS□-□□□,SR0906821KL□-□□□,RB0712331KL□-□□□,CM4532221□S□-□□□,SWI0402HP5N6□-□□,HS0735-S SERIES,SF1206,SS70326R8ML□-□□□,UF09H2202YL□-□□□,CU1048680YF□-□□□,MB2029800YS□,SS1205561KT□-□□□,BF07034R7MS□-□□□,HE06404R7ML□-□□□,MU2029601YS□,PWC1206-ST SERIES,SWI0603CTR13□-□□,SF1206200ML□-□□□,SWI0603 F,SR0302102KL□-□□□,SS1608102ML□-□□□,SWI0603 H,CC4532181□S□-□□□,SWI0603 C,HE12354R7MS□-□□□,SF1258 SERIES,SWI0201CT 8N1 □-□□,MU2029221YS□-□□□,TPI4018CT151□-□□,SS1278150MF□-□□□,SR10061R5ML□-□□□,SS1005120ML□-□□□,HE0420 SERIES,LPI0603FT2R7□-□□,QS5818120ML□-□□□,SS1206471KP□-□□□,SF1258330MS□-□□□,SR0503123JL□-□□□,CM45321R2□S□-□□□,SR0906272KL□-□□□,SS1608330ML□-□□□,QS6822101ML□-□□□,SWI0805 FT SERIES,SS09066R8ML□-□□□,MU2029601YS□-□□□,HE04122R2MS□-□□□,CM4532101□S□,SS0906150ML□-□□□,SB1005471KL□-□□□,SS2506330YL□-□□□,QF SERIES,QS58182R0YL□-□□□,MP20124R7MP□-□□□,CM3225R15□S□-□□□,RN80402R7YLB-□□□,SF1258102MS□-□□□,HS0735R10ME□-□□□,HE0640680ML□-□□□,SS0906121YL□-□□□,QS48183R9YL□-□□□,SS1258681KF□-□□□,SU8043 SERIES,RB0812221KL□-□□□,SB1005221KL□-□□□,SR0805561KL□-□□□,TPI6045CT330□-C1-□,SU1040 SERIES,SB0805470YF□-□□□,SQ5650220KL□-□□□,SF1258151MS□-□□□,SWI0603CT51N□-□□,SWI1008PT390□-□□,RC1008151KL□-□□□,BF0703680MS□-□□□,BF0703821MS□-□□□,SB1608471M2□-□□□,QS3828330ML□-□□□,SS12606R8YF□-□□□,RB0914150KL□-□□□,SS7045391MS□-□□□,SU1065100YF□-□□□,SWI1008CTR82 □-□□,TPI3015CT2R7□-□□,CU8043 SERIES,SU10488R2YF□-□□□,SQ4532470KL□-□□□,SR03025R6ML□-□□□,SR0602 SEIES,SS7032101ML□-□□□,SWI1210 FT SERIES,SR04034R7ML□-□□□,SWI0402CT2N2□-□□,SS09064R7ML□-□□□,BS0703220MS□-□□□,QS6822150ML□-□□□,MH1608R12JL□-□□□,CM32252R7□S□-□□□,HE1250100MS□-□□□,BS0703 SERIES,MH0603,SB70451R5ML□-□□□,HE12654R2MS□-□□□,SS06031R5ML□-□□□,RB09143R3ML□-□□□,SWI0201CT 6N7 □-□□,SR0403560KL□-□□□,SS0906181YL□-□□□,SR0602120ML□-□□□,SR0302681KL□-□□□,TPI5040CT3R3□-□□,CC3225470□S□-□□□,SB SERIES,SS1608151ML□-□□□,BS0906222YL□-□□□,HE1250R68MS□-□□□,RB0914101KL□-□□□,SB7045470KL□-□□□,SS12403R3YL□-□□□,LPI1210FT120□-□□,PQ2615,SS10052R2ML□-□□□,SU10403R8YF□-□□□,RB0912100KL□-□□□,SF4532110YC□-□□□,HE06241R0MS□-□□□,CM4532R18□S□-□□□,SR0503181KL□-□□□,UF15V2402YL□-□□□,SWI1210FT180□-□□,MH06035N6□S□-□□□,SB10051R0ML□-□□□,SS1005680YL□-□□□,SR0302100ML□-□□□,HC05204R7KL□-□□□,RB1010682JL□-□□□,SR0403 SERIES,SS0603471KL□-□□□,SWI0402HP68N□-□□,MU1608101YS□-□□□,SS12104R7YFB-□□□,QS68282R5YL□-□□□,SS1005330YL□-□□□,CU1038221YL□-□□□,SS12583R3YF□-□□□,SQ3225101KL□-□□□,SF1278R47YS□-□□□,SS1208101YP□-□□□,MB2029471YS□,SR0805221KL□-□□□,SS6028471ML□-□□□,SS0908222YL□-□□□,SWI0603CT30N□-□□,SF1278470MS□-□□□,SR0403471KL□-□□□,SWI0805FT1R8□-□□,MH1608R18JL□-□□□,SS0906222YL□-□□□,HE0630-L SERIES,SS09082R7ML□-□□□,SWI0402CT13N□-□□,PWC0603-ST SERIES,SS12604R7YF

选型指南 - 千如电子 - 2022.08 PDF 英文下载

Delta Electronics brochure

商品及供应商介绍 - 台达 - 2023/8/19 PDF 英文下载

PRODUCTS & Solutions

型号- 30 S4,SESI 9.1,731P,TEV,SCT,SESI 18,SESI 15,TEP SERIES,TEV SERIES,SESI 14,AS31,DLEF 42,C4N SERIES,CTS23,KM 111,CM12,C4E,CTS21,132P,CMC 22,ST79 SMD,253P,KM 915,FP-5-200,CT79 SMD,KM 78,KM 311-KM 21,OP SERIES,C4N,CEC,CA 158,CTC42,CTS41,744G,SC SERIES,SESI 22,CNC5X,PMR 64,CER,SPE0844S,CTC3E,NHB SERIES,CTS33,DBIT,CTS32,CMC 14,CA 152,CMC 15,KM 501-601,KM 82,MML-M SERIES,CMC 17,XBL SERIES,CMC 18,MML-C SERIES,KM 711-KM 7,CK SERIES,842P,SESI 32,FLYT,PMR 4,CT79E,MTLM 1234 MIL,PMA 64 T,C SERIES,TXR,CNC SERIES,CFS,TCK SERIES,KM 111 S,KM 111 T,MSCI 10000,CS SERIES,CE,710P,CF,SV,A 64 S4,CTC21,MIL-PRF-83421/06,HTSE 47 SR,MPCI 10000,CNC3X,ST79 HT200,CTS1M,R SERIES,HCESC,KCP 4 UA T,CTS4,CTS1,CTS13,MRA HT,734G,MKT,P.P.S 16 R,CFS SERIES,CNC5X SERIES,MKRS,MPA HT,SHD,CA 20,735P,PM 90,CA 30,PM 94,MP-4A,ESI 01,560P,SHR,KM 94S,CTC4,PM 980,CTC3,700P,HVD SERIES,XBL,PMA 64,PM 98,CM 04,PM 96,KPF-9,MPCI 12000,TKD,CA 40,WT83,CEC SERIES,FP- 60-700,682P,HVR SERIES,R 73 A,MPCI 233 H01,GDT 15,PM 720,DSCC 10004,810P,442P,430P,684P,SHR-SERIES,BIK SERIES,FL SERIE,CT79 HT200,KM 90,AP31,DMC 22 XXX 1WR,R 73 R,KM 97,PP 78 SERIES,C4E SERIES,KM 94,CT4E,CL SERIES,PM 730,TCF SERIES,BIK,431P,CA 15,SH SERIES,859P,CA 2,CA 1,MP4,PM 7,CT 91,HVA,AP41,HVD,SV SERIES,PM 90 S,CT 05 XXX 231 W,PM 948 S,MML-D SERIES,WS83,MML-D,MML-C,CTC4RSE,FLYT SERIES,HVR,LA SERIES,PM 948,CCM 6,CT79,MML-M,CCM 5,CCM 4,PM 50,TBC SERIES,A 74 S4 T,MPCI 20000,SPE0844,HTSE XX WR,BPM SERIES,PM 907 S,ST79,SHD-SERIES,KM 311-KM 21 T,PM 60,CNC,KM 50-60,880P,DCL-41,ESI 7,CT9E,KM 711-KM 7 T,882P,410P,CNR,CTC42E,CMR 07,TKD SERIES,MIL 39006/22,MKT S,CMR 04,CT 01 100 261 X,DSCC 93026,TCL SERIES,MIL 39006/25,CT 08 200 221 PR,PMR 4 T,TCH SERIES,C3N SERIES,CF SERIES,UBL,CN SERIES,PR 3 A,PM 96 T,PM 96 S,DCL-50,PRA HT,CTP42,UBZ,RA ...,KM 501-601T,DFC-11,FP-7-300,CEC5X,UBL SERIES,WRFT 4X,CCM 20,PP 3 M,HT SERIES,MSCI H01,CER SERIES,CCM 25,CMESC,PP 318,KPF,218P,860P,CEC5X SERIES,SMT47,CT79E HT200,PP 78,PM 907,PP 3 A,BI 73 R,PR 3 M,TBC,P.P.S 16 A,C3E SERIES,HVA SERIES,SBIT,KP-3C,CT 15 200 231 WR,KM 50-60T,DCL-14,TCN8X,P.P.S 13,HTSE XX SR,CTC21E,CTP21,TCN8X SERIES,PM 12,MPCI 233,TCF,TCE,TCH,TCL,DCL-23,TCK,TCN,BPM,CTS21E,TCM,PP 418,A 64 S4 T,FP-1-400,CNC3X SERIES,TCX,NHB,DCL-6,GDT 91,CMESC SERIES,MSCI 20000,TCM SERIES,CTS41RSE,CH SERIES,FP-11-500,PMR 64 T,30 S4 SERIES,CE SERIES,709G,CP SERIES,CT4,MPCI H01,TEF SERIES,PM 94 S,730P,CT9,730G,A 74 S4,FP-8C-1500,FP-4-150,CNR SERIES,C3E,TEF,UBZ SERIES,PS ...,CT 10,SCT SERIES,TEP,CT79E SMD,C3N,BI 73 A

快速参考指南 - EXXELIA - November 2022 PDF 英文下载

MCF-028005-001 EMI filter and transient protector

型号- MCF-028005-001

数据手册 - 博大科技 - 2023.03.22 PDF 英文下载查看更多版本

MCF-028前端滤波器系列涵盖典型28V国防应用中45W至250W的功率范围，符合数百种DC/DC电源转换器的要求

P-DUKE 拥有满足极端环境条件下国防和铁路应用极其苛刻的可靠性要求的良好记录。使用这种模组化方法时，设计可以在几天或几周内完成，而不需要几个月的宝贵工程资源。

应用方案发布时间 : 2024-06-08

【IC】P-DUKE开发了MCF-028系列DC/DC前级滤波器，用于国防与铁路等应用

P-DUKE开发了MCF系列MIL-COTS DC/DC前级滤波器，以满足MIL-STD 1275E（军用车辆28V DC电气系统）和MIL-STD 461（设备和子系统的电磁干扰控制）。这些滤波器接受 9-36Vdc输入电压，适用于具有28V或24V系统的军用车辆、飞机，并且适用于重工业和轨道机车车辆应用。

产品发布时间 : 2024-01-22

MCF-028 Series EMI filter and transient protector

型号- MCF-028008,MCF-028005,MCF-028 SERIES,MCF-028015,MCF-028010-001,MCF-028010,MCF-028015001-TH,MCF-028008-001,MCF-028015-001,MCF-028,MCF-028005-001

数据手册 - 博大科技 - 2023.10.11 PDF 英文下载

Product Introduction

型号- F1812L,A4711,A4712,A2410,FRU500-30,A7425,A7545,A7431A,A7431,A3085A,A74442,A317B,A7539,A7534,FRU110-30,FUB110-16,A7542,FRU300-30,A6115,A4059,A4730,A7530A,A4732,LO RHO F0603L,A7332,A7335,A4061,A4063,A7330,A6120,FRU700-30,A4722,F0603L,A4055,A8167A,A7566,A4056,A4057,A4051,A6110,A4052,FUB110-30,A6500A,F1206L,LO RHO F1812L,A79LXX,AP8024,FRU090-30,A6318A,A7506,FUB200-30,AP8263,FUB075-16,AP8022,A7501,A79XX,A7630,A6540,A7511,A6301,A4001,A6300,A4002,A8169,AP2273,AP8012,FUB135-16,A8946,A9912,A9913,A1117A,A9910,AP8370,A1084,A8230A,AP8002,AP8366,A6318,A4812,A4813,A7523,A7525,A78XX,A7531,A6250C,A7530,FUB200-16,A6250A,A6201,A63250C,FUB185-16,A6303B,A6303A,A8180,A8181,A78LXXA,A4808,A25CM02,A4809,AG2136,A4804,A4805,A4806,A7516,A6306,A6303,A4004,A6305,A6304,A4006,A6140A,A8176,FRU160-30,LO RHO F1206L,A25CM01,AG2008,A6151A,A3232,FUB160-16,A6301A,A8240,A7230A,A78L05,AG2113,A7812,A4786,A8113,LO RHO F0402L,A7142,FRU600-30,A8230,A6300A,AG2106,AG2104,A6516,AG2101,A7231A,FUB160-30,A71116,A7406B,A4809C,A78L24,FRU400-30,F12101L,F0805L,AP8275,LO RHO F0805L,A6501,A6500,FUB135-30,A8131,AH8113,AP8836,FUB155-16,A79L05,A2212,FUB090-16,A2211,A7330A,A7108,A7221A,A7115,A6141,A6140,A8160A,A1118,A317,A2323,A7222A,A2327,FRU135-30,A6800,A2203,A7222,A6250,A7220,FRU250-30,FRU900-30,A79L24,A4777,A4778,FRU800-30,A7805,A4779,A4773,A4774,A7801,A4775,A2358,A4776,A4781,A4782,FLB090-30,A4783,FUB120-16,A78MXX,A74442A,F2920L,A6700,A4770,A4771,A4772,A6151,A2230,FRU185-30,LO RHO F1210L,A6150,A4056B,F1210L,A6100A

商品及供应商介绍 - AIT - 2022/8/2 PDF 英文下载

MCF-028 LINE PROTECTIONS & EMC CONSIDERATIONS

型号- MCF-028010-001,MCF-028008-001,MCF-028015-001,MCF-028 SERIES,MCF-028,MCF-028005-001

用户指南 - 博大科技 - 10/12/2023 PDF 英文下载

P-DUKE MCF Series Highly Integrated DC/DC Front-end Filters Accepting 9-36Vdc Input Voltage for Military and Rolling Stock Applications

P-DUKE has launched the new MCF series which are front-end filters for P-DUKE COTS (commercial-off-the-shelf) DC/DC converters to comply with the requirements of MIL-STD 1275D and MIL-STD 461. This filter series accepts 9-36Vdc input voltage (50Vdc for 1 sec.) .

新产品发布时间 : 2023-04-20