What Are the 40G QSFQ+ Fiber Optical Transceivers and Their Differences?
40G networks are widely used in data centers. 40G fiber
optical transceivers are the mainstream devices for interconnection
between data center equipment. So what are the main types of 40G fiber
optical transceivers? What are the differences between them?
The three types of 40G QSFP are 40G QSFP+ SR4, 40G QSFP+ LR4 and 40G QSFP+ PSM LR4. They are all compliant with 40G Ethernet, and data center switches support Infiniband 4xSDR, DDR and QSR. It has four data transmission channels, each with a transmission rate of about 10Gbps, and the simultaneous transmission of four channels can achieve a transmission rate of 40Gbps. It also supports hot-swappable QSFP package with an ultra-low power consumption.
1. 40G QSFP+ SR4 transceiver
In 40G network transmission, it is usually used with MPO/MTP connectors. It uses multi-mode optical fiber for transmission. When matched with OM3 multi-mode optical fiber jumper, it can support a transmission distance of 100 meters, and when it is matched with multi-mode optical fiber OM4 jumper, it can support a transmission distance of 150 meters;
2. 40G QSFP+ LR4 fiber optical transceiver
40G QSFP+ LR4 fiber optical transceivers are generally connected with LC connectors, which support hot-swappable electrical interfaces with a lower energy consumption, and support the transmission distance of single-mode optical fiber up to 10km;
3. Comparison of 40G QSFP+ SR4 and 40G QSFP+PSM LR4 fiber optical transceivers
The 40G QSFP+ PSM LR4 fiber optical transceiver utilizes parallel-designed MPO/MTP interfaces with four full-duplex channels, and can achieve a transmission distance of 2km through 8 independent optical cables with single-mode fibers, and supports power consumption <3.5W.
40G QSFP+ SR4 fiber optical transceiver and 40G QSFP+ PSM LR4 transceiver have the same connector type, but 40G QSFP+ SR4 fiber optical transceiver is commonly used for multi-mode fiber transmission, and the transmission distance is short. 40G QSFP+ PSM LR4 fiber optical transceiver is mostly used for single-mode fiber transmission, and the transmission distance is long.
4. 40G LR4 PSM fiber optical transceiver
The working principle of the 40G LR4 PSM fiber optical transceiver is the same as that of the 40G QSFP+ SR4 fiber optical transceiver, which converts the photoelectric signal through the laser array; the 40G LR4 PSM transceiver is suitable for long-distance transmission, and the 40G QSFP+ SR4 fiber optical transceiver is suitable for short-distance transmission.
Compared with the 40G QSFP+ SR4 fiber optical transceiver, although both are suitable for long-distance transmission, the 40G LR4 PSM fiber optical transceiver requires 8 single-mode optical fibers for transmission, and the 40G QSFP+ SR4 fiber optical transceiver only uses 2 single-mode optical fibers for transmission.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由出山转载自T&S Blogs,原文标题为:What Are the 40G QSFQ+ Fiber Optical Transceivers and Their Differences?,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Type Selection and Application of Fiber Transceiver
Although optical modules are a trend to replace fiber transceivers, there is still a relatively large user base for fiber transceivers. For example, fiber transceivers are still commonly used transmission products in monitoring systems.
The Difference Between Fiber Patch Cord and Fiber Pigtail
Optical fiber patch cords are cables directly connected to desktop computers or devices to facilitate device connection and management. Patch cords have a thicker protective layer and are often used between terminal boxes and optical transceivers.
What Factors ShouldWhat Factors Should Be Considered in Choosing a Cost-effective Active Optical Cable?
Active optical cable, short for AOC, is composed of multimode optical fiber, optical transceiver, control chip and parallel optical module. Both of the optical transceiver at each end provide photoelectric conversion and optical transmission functions to increase the transmission speed and transmission distance of the optical cable without weakening the compatibility with the standard electrical interface. It is mainly used in short-distance, multi-channel data communication applications.
太辰光(T&S)光纤连接器选型指南
目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC
型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC
太辰光(T&S)光纤通信产品选型指南
目录- 公司简介 陶瓷插芯 常规光纤连接器 IEC分级跳线 MPO/MTP多芯连接器 机箱和模块盒 标准测试线 保偏光纤连接器 光收发组件 高速光模块/AOC线缆连接方案 光纤回路器/衰减器 连接头/适配器/终端器 熔融拉锥耦合器和PLC光分路器 波分复用器 光模块及有源光缆 高速线缆 光纤光栅
型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM
TSQM4-NCNGE3C光端机单模40GBase收发器,带诊断监控双工QSFP+PSM4 10km收发器
描述- 本资料介绍了一种四通道全双工光收发器模块,适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道,每个通道可达到11.2Gbps的传输速率,总数据率为40Gbps,使用单模光纤可传输10km。模块具有低功耗、热插拔QSFP形式因素、内置数字诊断功能等特点。
型号- TSQM4-NCNGE3C
TSQM4-NCNGD3C光端机单模40GBASE收发器,带诊断监控双工QSFP+PSM4 2KM收发器
描述- 该资料介绍了一种四通道全双工光模块,适用于InfiniBand QDR/DDR/SDR、10G/8G/4G/2G光纤通道、PCIe和SAS应用。该模块提供4个独立的发送和接收通道,每个通道的数据传输速率可达11.2Gbps,总数据率为40Gbps,使用单模光纤可传输2公里。模块具有低功耗、热插拔QSFP形式因子、内置数字诊断功能等特点。
型号- TSQM4-NCNGD3C
What is the Difference Between AOC and Optical Transceiver?
AOC active optical cable is an optical fiber with a module attached to each end, which is equivalent to a cable and a module.AOC active optical cable is also widely used by many customers because its cost is cheaper than that of two separate modules plus one optical fiber.
TSSLS-NFNCK8C光端机1550nm SFP+单模收发器,带诊断监控双工SFP+80km收发器
描述- 本资料介绍了一款1550nm单模SFP+光收发器,适用于10Gbps传输速率,支持80km光纤距离。该产品符合SFF-8472标准,具备高灵敏度APD光电二极管和TIA,支持数字监控功能,适用于10GBASE-ZR/ZW和10G Fiber Channel等应用。
型号- TSSLS-NFNCK8C
Solutions for 40G QSFP+DAC/AOC Direct Connection Cable
Now, with the wide use of the 40G network, QSFP+ direct connection cable is also gradually popular. Now T&S introduces the common QSFP+ direct cable solutions in the market in detail through this article.
Knowledge Sharing about SFP+ AOC
T&S can provide AOC and DAC cables required for the construction of large-scale data centers in 10G/40G/100G applications. The transmission media of AOC and DAC cables are different. For AOC, the signal transmits through light; for DAC, the signal transmits through electricity.
TSSLS-DXXCK8C光端机DWDM SFP+单模收发器,带诊断监控双工SFP+80KM收发器
描述- 本资料介绍了一种10Gbps SFP+单模光纤收发器,适用于80公里距离的数据传输。该收发器符合SFP+ MSA标准,具备高数据速率、低功耗、宽工作温度范围等特点,适用于10GBASE-ZR/ZW、10G Fiber Channel等应用。
型号- TSSLS-DXXCK8C
The Difference Between 100G QSFP28 Fiber Optical Transceiver and 100G CFP4 Fiber Optical Transceiver
The fiber optical transceiver is an optoelectronic device that performs electro-optical and photoelectric conversion. The fiber optical transceiver is a carrier, acting as the transmitting end to convert electrical signals into optical signals, and as the receiving end to convert the optical signals into electrical signals.
What Impact Does The Growing Chatgpt Have on The Fiber Optical Transceiver Market?
The demand for high-performance servers and GPUs was initially sparked by Chat GPT. Since this year, 25% of the hardware‘s computing power has been used to handle access, and the remaining 75% has been used to train models.
电子商城
登录 | 立即注册
提交评论