26-40GHz Wideband Low Noise Amplifier CHA2362-98F Suitable for Military to Commercial Communication Systems
The CHA2362-98F is a 26-40GHz wideband Low Noise Amplifier with a very low noise figure of 2dB and an integrated 3 stage amplifier.
It features a P-1dB of 9dBm and return loss less than 13dB. This product is designed on an internal GaAs 0.1µm gate length pHEMT process.
It is suitable for a wide range of applications, from military to commercial communication systems.
Main Features:
RF bandwidth: 26-40GHz
Noise figure: 2dB
Linear gain: 22dB
P-1dB: 9dBm
OIP3: 21dB
Return loss: <13dB
DC bias: 4V @ 65mA
- |
- +1 赞 0
- 收藏
- 评论 0
本文由洛希转载自UMS News,原文标题为:New very low noise amplifier, the CHA2362-98F,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
UMS CHA3024-QGG,a Broadband 2-22GHz Low Noise Amplifier with adjustable gain control
The UMS CHA3024-QGG is a broadband 2-22GHz low noise amplifier with adjustable gain control (AGC). This circuit is designed for a wide range of applications, for example, electronic warfare, X and Ku Point to Point radio, and test instrumentation.
CHA3801-FAA, a L-Band Noise Amplifier with a Frequency Range of 1-2GHz in an SMD Hermetic Ceramic Package
The CHA3801-FAA is an L-Band Low Noise Amplifier in an SMD hermetic ceramic package. It exhibits a very high linearity with 27dBm OIP3 and a low consumption of 5V@70mA. The circuit has been developed for a wide range of applications from commercial space, to military, and commercial communication systems.
UMS功率放大器(PA)选型表
UMS提供以下品类和技术指标的放大器产品,频率最高可达105GHz,带宽超过20GHz,Gain(dB):10-38.5,Bias(mA):30-2300,Bias(V):2.5-30.
产品型号
|
品类
|
RF Bandwidth (GHz)min
|
RF Bandwidth (GHz)max
|
Gain(dB)
|
IP3(dBm)
|
P-1dB OUT(dBm)
|
Sat. Output Power(dBm)
|
PAE(%)
|
Bias(mA)
|
Bias(V)
|
Case
|
CHA1008-99F
|
低噪声放大器
|
80
|
105
|
17
|
DC
|
5
|
DC
|
DC
|
115
|
2.5
|
Die
|
选型表 - UMS 立即选型
CHA2595-QDG 27.5-43.5GHz低噪声放大器砷化镓单片微波集成电路SMD无铅封装
描述- CHA2595-QDG是一款27.5-43.5GHz宽频带低噪声放大器,采用pHEMT工艺制造,具有宽带、低噪声、可调增益等特点。适用于军事到商业通信和测试仪器系统等多种应用。
型号- CHA2595-QDG
UMS–LNA选型表
UMS提供以下技术参数的L波段低噪声放大器(LNA)选型;L波段作为常用的通信频段之一,通常用于DAB、卫星导航等中,低噪声放大器(LNA)在整个L波段卫星通信系统中起到关键作用,通常需要考虑噪声系数、工作频率和增益等指标。本选型器噪声系数筛选范围在1-6.5dB,工作频率范围在1-105GHz,线性增益范围在10-34dB。
产品型号
|
品类
|
RF Bandwidth (GHz) min
|
RF Bandwidth (GHz) max
|
Gain (dB)
|
Gain Flatness(+/-dB)
|
Noise Figure(dB)
|
P-1dB OUT(dBm)
|
Bias(mA)
|
Bias(V)
|
Case
|
CHA3801-FAB
|
AMPLIFIER – LNA
|
1
|
2
|
28
|
1
|
1.5
|
16
|
70
|
5
|
Hermetic SMD
|
选型表 - UMS 立即选型
DBLNA203200380A低噪声放大器3.2GHz~3.8GHz
描述- 本资料介绍了QOTANA TECHNOLOGIES公司生产的低噪声放大器DBLNA203200380A,该放大器工作频率范围为3.2GHz至3.8GHz,具有36dB的典型增益、1.8dB的典型噪声系数和+25dBm的典型P1dB输出功率。资料还提供了该放大器的典型应用领域,包括无线基础设施、射频微波和VSAT、军事和航空航天测试仪器、光纤通信等。
型号- DBLNA203200380A
PE15A1011低噪声放大器
描述- PE15A1011是一款宽频带低噪声射频同轴功率放大器,工作频率范围为10 MHz至1 GHz。该放大器具有1 dB的典型噪声系数、17 dBm的P1dB和30 dB的小信号增益,增益平坦度为±0.7 dB。通过混合MIC设计和先进的GaAs PHEMT器件实现了卓越的技术性能。该低噪声放大器需要+12V直流电源,无条件稳定,工作温度范围为-40°C至+75°C。
型号- PE15A1011
电子商城
现货市场
登录 | 立即注册
提交评论