Microstrip Isolator/Circulator Mounting Instruction Manual
In this article, UIY will share the mounting instruction manual for the Microstrip Isolator/Microstrip Circulator.
Storage Conditions:
This product must be stored in a cool and dry area. (Nitrogen Cabinet or Dry Cabinet)
Operation:
Operating with a Plastic or Bamboo Tweezer and Free-Dust Finger Cots on a clean area.
Avoid scratching on the Microstrip Line.
Cleaning Process:
It is recommended to use Absolute Ethanol to clean the surface or wipe gently with Anhydrous Ethanol Cotton.
CAUTION! DO NOT WASH IN AN ULTRASONIC CLEANER!
Mounting Instruction:
Welding Process:
Solder with a melting point of 183℃ or below is recommended for installation, for example, Sn63pb37 Solder Paste or Solder sheet.
If using a Heating Platform for welding, remove the products after the solder is fully melted at 200℃, and the residence time does not exceed 30 seconds.
Bonding Process:
The Dots of conductive glue should be even and uniform. After the product is placed in the installation position and pressed tightly, the conductive glue can be seen around it but not exceeds. The curing temperature is less than 140℃.
Lead Connection:
Bonding Method:
The bonding gold wire is recommended to be 25μm, the thermosonic bonding temperature is 100-150℃, the pressure of the ball bond is 30-55gf, and the pressure of the wedge bond is 15-25gf.
Soldering Method:
Place the box/board with the microstrip product installed on a 120℃ heating table to preheat.
It is recommended to use solder with a melting point temperature of 183℃ or below, and then lap the gold-plated copper foil connecting wires pre-pressed into a certain arc to the flux-coated on the microstrip line, use a pointed electric soldering iron to solder the connecting wires in sequence.
The temperature of the soldering iron is set at 210-230℃, and the soldering time does not exceed 2 seconds per time.
It is required that the soldering should be as little as possible and the solder joints should be smooth and round.
Soldering of leads is generally not recommended.
Assembly Instruction Chart:
[1] Mounting Gap for Assembly Dimensions:
[2] The unilateral assembly gap of the product should be ＜0.05mm
Microstrip Isolator/Circulator Images
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自UIY News，原文标题为:Microstrip Isolator/Circulator Mounting Instruction Manual，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
UIYMI67A 8 to 18GHz – Microstrip Isolator
型号- UIYMI67A85T95,UIYMI67A95T105,UIYMI67A13T14,UIYMI67A14T15,UIYMI67A14T16,UIYMI67A12T14,UIYMI67A135T145,UIYMI67A10T12,UIYMI67A11T12,UIYMI67A12T13,UIYMI67A8T9,UIYMI67A125T148,UIYMI67A15T18,UIYMI67A105T115,UIYMI67A155T175,UIYMI67A155T165,UIYMI67A,UIYMI67A145T155,UIYMI67A9T10,UIYMI67A9T11,UIYMI67A8T12,UIYMI67A115T125,UIYMI67A8T14,UIYMI67A165T175
UIYMI34A 31 to 40GHz – Microstrip Isolator
型号- UIYMI34A33T37,UIYMI34A32T40,UIYMI34A,UIYMI34A35T40,UIYMI34A31T39,UIYMI34A32T38
UIYMI44A 24 to 40GHz – Microstrip Isolator
型号- UIYMI44A27T31,UIYMI44A38T40,UIYMI44A33T37,UIYMI44A24T275,UIYMI44A29T31,UIYMI44A37T40,UIYMI44A,UIYMI44A25T27,UIYMI44A24T26,UIYMI44A30T31,UIYMI44A245T265,UIYMI44A30T33
UIYMI44B 24 to 40GHz – Microstrip Isolator
型号- UIYMI44B25T27,UIYMI44B24T26,UIYMI44B,UIYMI44B29T31,UIYMI44B30T31,UIYMI44B33T37,UIYMI44B30T33,UIYMI44B38T40,UIYMI44B37T40,UIYMI44B24T275,UIYMI44B27T31,UIYMI44B245T265
UIYMI67A 8.5 to 23GHz – Microstrip Isolator
型号- UIYMI67A85T95,UIYMI67A95T105,UIYMI67A13T14,UIYMI67A14T15,UIYMI67A14T16,UIYMI67A12T14,UIYMI67A135T145,UIYMI67A10T12,UIYMI67A11T12,UIYMI67A12T13,UIYMI67A21T23,UIYMI67A125T148,UIYMI67A15T18,UIYMI67A105T115,UIYMI67A155T175,UIYMI67A196T212,UIYMI67A155T165,UIYMI67A145T155,UIYMI67A18T20,UIYMI67A9T10,UIYMI67A9T11,UIYMI67A115T125,UIYMI67A165T175
UIYMC77A 7 to 9.5GHz – Microstrip Circulator
型号- UIYMC77A8T85,UIYMC77A,UIYMC77A7T9,UIYMC77A7T8,UIYMC77A75T95,UIYMC77A79T84
UIYMC55B 15 to 27.5GHz – Microstrip Circulator
型号- UIYMC55B,UIYMC55B19T20,UIYMC55B21T23,UIYMC55B16T17,UIYMC55B17T18,UIYMC55B15T18,UIYMC55B17T19,UIYMC55B18T19,UIYMC55B15T17,UIYMC55B15T16,UIYMC55B196T212,UIYMC55B22T26,UIYMC55B2425T275
UIYMI1212A 3.9 to 5.9GHz – Microstrip Isolator
型号- UIYMI1212A44T47,UIYMI1212A39T43,UIYMI1212A44T59,UIYMI1212A46T5,UIYMI1212A,UIYMI1212A48T52,UIYMI1212A4T45,UIYMI1212A42T54
电子商城
服务
可定制射频隔离器/环行器（10M-40GHz），双工器/三工器（30MHz/850MHz-20GHz），滤波器（DC-20GHz），功分器，同轴负载，同轴衰减器等射频器件；可定制频率覆盖DC~110GHz，功率最高20KW。
最小起订量： 1 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论