Ventec Unveils aerolam Base-Material Solutions for A&D Electronics

2022-01-08 Ventec

At productronica 2021 we will be launching‘aerolam’– a base material solutions set specifically curated for the diverse and unique requirements of aerospace & defense applications. The Ventec team will be on hand in Hall B3 at booth #222 for the launch and to showcase its unique laminate & prepreg capability across a very wide range of applications and budgets.


The evolution of aerospace and defense (A&D) electronics is accelerating at a staggering pace, driving the demand for reliable high-performance materials that maintain mechanical and electrical integrity in harsh mission-critical operating conditions. Paying attention to the properties of materials at the substrate level is the first step towards achieving the most stringent performance targets of today's A&D manufacturers.


Whatever the substrates must handle – high-speed digital signals, high RF frequencies, intense heat dissipation, extreme environmental stresses – the aerolam portfolio guides designers and manufacturers of high-performance A&D electronics to high-quality products that are ready to meet those demands and are supported by all the necessary documentation including test schedules and certificates of conformity.


The aerolam portfolio caters for the complete spectrum of A&D application scenarios, from equipment intended to operate in a relatively benign environment such as inside a command-and-control center, to high-performance fielded systems that must withstand the toughest conditions including extreme temperatures, high vibration and g-forces, salt spray, and humidity that challenge reliability to the utmost.


aerolam product-highlights include:

tec-speed 20.0 and tec-speed 30.0 - prepregs and laminates that are engineered to preserve signal energy and aid the fight against noise. Leveraging the latest knowledge in low-loss materials, Ventec’s most advanced formulas meet IPC 4103 specifications and provide the foundation for multi-GHz applications up to V/W-band and millimeter-wave frequencies.


VT-901 - Where mechanical strength and high-temperature stability are critical, VT-901, a UL-94 V-0 rated polyimide substrate has high flex strength, high glass temperature (Tg), low Z-axis CTE, and long T260 and T288 times – to maintain dimensional stability and integrity even under harsh loads.


VT-90H – A non-brominated, cost effective high-reliability polyimide that delivers the high-temperature capabilities, high fracture toughness, low Z-axis CTE, and UL-94 flammability HB rating that ensures compliance with defense and aerospace standards worldwide.


Ventec’s Quality Management Systems are of course accredited with AS9100 quality standard, and conversant with applicable IPC, space agency and MIL-STD specifications, reflecting Ventec’s commitment to meet the strictest industry requirements for aerospace-related products.


技术资料,数据手册,3D模型库,原理图,PCB封装文件,选型指南来源平台:世强硬创平台www.sekorm.com
现货商城,价格查询,交期查询,订货,现货采购,在线购买,样品申请渠道:世强硬创平台电子商城www.sekorm.com/supply/
概念,方案,设计,选型,BOM优化,FAE技术支持,样品,加工定制,测试,量产供应服务提供:世强硬创平台www.sekorm.com
集成电路,电子元件,电子材料,电气自动化,电机,仪器全品类供应:世强硬创平台www.sekorm.com
  • +1 赞 0
  • 收藏
  • 评论 0

本文由咪猫转载自Ventec,原文标题为:Ventec Unveils aerolam Base-Material Solutions for A&D Electronics,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。

相关研发服务和供应服务

评论

   |   

提交评论

全部评论(0

暂无评论

相关推荐

Rogers‘ Advanced Laminates Power The Mars Exploration of NASA

NASA announced yet another historic moment on Mars: the landing of their most advanced explorer yet, the Perseverance Rover. High-frequency specialty laminates enable radars and antennas on these types of rovers and the vehicles that get them there. The advanced circuit materials of ROGERS have been in nearly every US space mission,such as Rogers RT/duroid® high frequency circuit materials are filled PTFE (random glass or ceramic) composite laminates for use in high reliability, aerospace and defense applications.

2021-06-24 -  原厂动态 代理服务 技术支持 采购服务

The Mars Opportunity Rover, SpaceX launch and Rogers‘ Mission-Critical Materials

Design engineers need to know that their spacecraft is going to perform as intended. At Rogers, we are proud to provide high reliability materials that ensure successful missions. For over 40 years, our advanced circuit materials have been in nearly every US space mission. High-frequency specialty laminates enable radars and antennas on space rockets, probes, landers and rovers.

2021-09-18 -  原厂动态 代理服务 技术支持 采购服务

Ventec to Showcase New Range of High-performance PCB laminates and Prepregs at IPC APEX Expo 2023

Ventec will be launching a range of new PCB laminate and prepregs at the IPC APEX Expo in San Diego, CA. New additions to the tec-speed and tec-thermal ranges offer excellent performance in demanding conditions and harsh environmental applications. Ventec will be also showcasing autolam solution developed for the automotive industry and aerolam working for aviation, aerospace, and defense applications.

2023-01-19 -  原厂动态

Rogers(罗杰斯)高频层压板材料和粘结材料选型指南(英文)

描述- Rogers Corporation is the world’s leading manufacturer of high performance dielectrics, laminates and prepregs used in microwave and RF printed circuit and related applications in Aerospace & Defense, Wireless & Wireline (digital) Infrastructure, Automotive Radar Sensor, Satellite TV, Mobile Internet Device and High End Chip Scale Packaging.

型号- RO4534,RO3203,RO4533,KAPPA® 438,RO4003C,RO4533™,AD300D-IM,CLTE-MW,COOLSPAN,ISOCLAD 933,RT/DUROID 6002,CUCLAD 217,AD255C,RO3035™,AD300D,COOLSPAN® TECA,RO4725JXR™,AD250TM,CUCLAD,CLTE™,6010.2LM,CLTE-AT™,RT/DUROID 6006,RO4003C LOPRO®,RO4730G3 LOPRO®,RO4534™,XTREMESPEED RO1200,CLTE SERIES,CUCLAD® 6250,RO4835T™,6002,RO3210,RO4350B LOPRO,AD350A™,AD255C™-IM,RO3006™,RO4730G3™,RO3010™,TC600™,RO3206,RO4535,RT/DUROID 6202PR,RO4535™,RO4835 LOPRO®,RO4534 LOPRO®,RO4533 LOPRO®,6250,RO4730G3 ED,TC600TM,AD255TM,RT/DUROID 6202PR 0.005",AD250C™,RO3003G2™,RO4360G2,ISOCLAD® 917,CUCLAD 233,RADIX,RT/DUROID® 5880LZ,AD350A,6006,TC600,RO4835™,RO4535 LOPRO,TMM®10,AD300D™-IM™,DICLAD,RO3035,RO4835IND™ LOPRO,KAPPA,RO4000,TMM 13I,AD SERIES,RO4730G3,CLTE SERIES™,MAGTREX® 555,TMM®13I,ISOCLAD,CLTE-XT™,RO3210™,CUCLAD 6700,TMM® 3,RO3206™,RO4350B LOPRO®,ANTEO,RT/DUROID 6202PR 0.020",XTREMESPEED™ RO1200™,TMM 10,RT/DUROID® 5870,TC350™ PLUS,TC350,RO4360G2™,RO3003,RT/DUROID 6010.2 LM,CLTE-MW™,RO3000,CLTE,DICLAD® 880,RO3003G2,588018X12H1/H1R30200+-001DI,RO4350B,AD300TM,CUCLAD 250,RT/DUROID 5870,DICLAD 527,RO4835T,AD255C™,RO3003™,6700,RO4460G2™,DICLAD 880,DICLAD® 527,RT/DUROID 5880LZ,RT/DUROID 6202,RO4835IND,TC350 PLUS,AD350TM,RO4350B™,6202,RO3010,RT/DUROID 6035HTC,RO4450F™,RO4835 LOPRO,AD300D™,RT/DUROID 5880,RT/DUROID 6202PR 0.010",DICLAD 880-IM,AD350,KAPPA 438,DICLAD 870,6202PR,SPEEDWAVE® 300P,ANTEO™,CLTE-XT,RO3006,RO4830™,RO4830,TMM 10I,5880,AD300,AD255-IM,RT/DUROID,TMM 6,TMM 4,TMM®10I,DICLADR 880-IM,RT/DUROID 6010.2LM,TC350 TM,CU4000 LOPRO,RO3203™,ISOCLAD 917,RO4003C™,2929,TC350™,RO4460G2,DICLAD® 870,RO4450F,TMM,CLTE-AT,RO4450T™,TMM®4,AD250,AD250C,TC SERIES,TMM®3,6035HTC,AD255,RO4835,CUCLAD® 217,TMM®6,RO4450T

12/ 2023  - ROGERS  - 选型指南  - REV. 12/ 2023 代理服务 技术支持 采购服务

CLTE-MW公司™ 层压板

描述- CLTE-MW™ 玻璃纤维增强聚四氟乙烯复合材料层压板是一种用于电路设计的经济高效、高性能材料。该层压板系统适用于因物理或电气限制而厚度受限的应用。提供从3密耳到10密耳的七种厚度选项,确保了理想的信号与地间距,适合当今5G和其他毫米波设计。此外,还提供了多种铜箔选择,包括卷材、反向处理ED和标准ED。可根据需求提供电阻箔和金属板选项。CLTE-MW层压板采用散布玻璃加强,结合高填充率有助于最小化高频玻璃织物对电磁波传播的影响。编织玻璃加强还提供了优异的尺寸稳定性。其他关键特性还包括低Z轴CTE(30ppm/°C)以实现出色的镀通孔可靠性、在10 GHz时的低损耗角正切(0.0015)以实现低损耗设计、以及低吸湿率(0.03%)以确保在各种工作环境中稳定运行。

型号- CLTE-MW™,CLTE-MW

2017/09/08  - ROGERS  - 数据手册 代理服务 技术支持 采购服务 查看更多版本

TC350™Plus层压板

描述- TC350™ Plus 玻璃纤维增强复合材料是一种基于PTFE的陶瓷填充材料,适用于电路设计。该材料具有高热导率(1.24W/mK),适合高频微波和工业加热应用,提供低成本、高性能的热管理解决方案。它具备低插入损耗、优异的机械钻孔性能,并可在多种厚度下提供平滑电极沉积铜箔涂层。此外,其还具有低CTE、低吸湿性、高介电强度等特点。

型号- TC350,TC350 PLUS,TC350™ PLUS

072321  - ROGERS  - 数据手册  - Issued 1519 代理服务 技术支持 采购服务

工程材料解决方案-能力手册

描述- Rogers Corporation是全球领先的高性能射频材料供应商,拥有60多年经验。公司提供高性能介电材料、层压板和预浸料,应用于航空航天、无线和有线基础设施、汽车雷达传感器、卫星电视、移动互联网设备和高端芯片级封装等领域。Rogers提供广泛的产品和解决方案,包括热管理、天线解决方案、特殊介电材料和先进材料,旨在满足各种应用需求和环境。

型号- DICLAD,TC300™,COOLSPAN®,RO3000,CLTE,RO4000,RO3000®,RT/DUROID 6035HTC,DICLAD®,RADIX™,ISOCLAD,ISOCLAD®,RT/DUROID 5000,TC600™ SERIES,RT/DUROID 6000,RO4000®,MAGTREX®,RO4725JXR™,TC300™ SERIES,RT/DUROID® 5000,CUCLAD®,CUCLAD,TC600™,CLTE™

060722  - ROGERS  - 商品及供应商介绍 代理服务 技术支持 采购服务

【产品】半固化片VT-90H,具有低Z轴热膨胀系数,适用于发动机、飞行控制等

腾辉电子推出半固化片型号VT-90H,Tg 250℃,高Td,断裂韧性提高,低Z轴热膨胀系数,非溴化物。可应用于芯片制造商,发动机/飞行控制,电源/背板,军工和老化测试板。

2023-03-03 -  产品

【产品】分解温度典型值达395℃的层压板芯材VT-901,Z轴CTE总体膨胀系数低为1.4%

腾辉电子2020年新推出VT-901层压板芯材,玻璃化温度 250℃,同时具备高 Td(分解温度)和良好的断裂韧性,Z 轴CTE(热膨胀系数) 低,符合 NASA 对无可见溴的要求。

2021-08-18 -  新产品

ESA(欧洲航天局)批准ACB使用Ventec VT-901聚酰亚胺材料用于刚性板和刚绕板生产

Ventec (6672 TT)很高兴地宣布,VT-901聚酰亚胺材料现在已通过ESA(欧洲航天局)的核可,用于比利时ACB公司的刚性板、刚绕板之聚酰亚胺及HDI印刷电路板制造。Ventec的VT-901聚酰亚胺材料具有高Td(395 oC),Tg 250 oC和低轴CTE(50 ppm/ oC)的特性,可提供ACB公司刚性板、刚绕板以及HDI PCB制造需求的高可靠性,以符合ESA要求。

2021-06-16 -  原厂动态

Ventec Builds Global Inventory of High-Speed/Low-Loss Materials to Deal with Laminate Material Supply Issues

In response to high demand and laminate material supply issues affecting some producers of low transmission loss and high-frequency laminates and prepregs, Ventec International Group Co., Ltd. (6672 TT) has implemented material inventory & supply chain measures with favorable order requirements. In doing so, Ventec ensures that customers can continue to rely on uninterrupted material delivery through the company’s fully controlled and managed global supply chain.

2021-06-26 -  原厂动态

Ventec新系列PCB层压板将首次亮相2023年美国IPC APEX博览会,可提供优异导热性能

Ventec不断扩大PCB材料范围,旨在满足PCB制造行业的技术需求,将在圣地亚哥举办的2023 IPC APEX博览会上推出一系列新的PCB层压板和预浸料,提供优异导热性能。

2023-01-17 -  原厂动态

Ventec Launches tec-speed 20.0 VTM1000i Hydrocarbon Laminate, with High Dk of 9.8 and Low Df of 0.0023

Ventec has launched the new tec-speed 20.0 VTM1000i hydrocarbon laminate that offers impressive thermal reliability and exceptionally high Dk (9.8) and lows Df (0.0023) typically seen only in PTFE materials.

2022-12-16 -  新产品

【材料】腾辉电子全新碳氢化合物层压板tec-speed 20.0 VTM1000i,助力卫星通信和5G射频应用

腾辉电子推出新的 tec-speed 20.0 VTM1000i 碳氢化合物层压板,产品可提供令人出色的热可靠性和高Dk(9.8)和低Df(0.0023),新一代碳氢化合物层压板为行业提供了高端射频应用的低预算解决方案,包括卫星通信和5G射频应用。

2022-12-15 -  新产品

Ventec Wins 8th Aunnual F&B TOP 1000 Elite SME Award

Ventec is pleased to announce that its subsidiary in Taiwan, Ventec Electronics Corporation (Ventec TW), has received the 8th Annual Dun & Bradstreet TOP 1000 Elite SME Award.

2022-01-06 -  原厂动态
展开更多

电子商城

查看更多

品牌:ROGERS

品类:High Frequency Circuit Materials

价格:¥550.8681

现货: 1,600

品牌:ROGERS

品类:Circuit Materials

价格:¥2,479.9453

现货: 1,286

品牌:ROGERS

品类:Antenna Grade Laminates

价格:¥2,989.4355

现货: 429

品牌:ROGERS

品类:High Frequency Circuit Materials

价格:¥554.2134

现货: 385

品牌:ROGERS

品类:Liquid Crystalline Polymer Circuit Material

价格:¥1,485.0299

现货: 253

品牌:ROGERS

品类:Antenna Grade Laminates

价格:¥2,571.9097

现货: 250

品牌:ROGERS

品类:High Frequency Circuit Materials

价格:¥2,669.6313

现货: 250

品牌:ROGERS

品类:Laminates

价格:¥1,452.6209

现货: 250

品牌:ROGERS

品类:PTFE/Woven Fiberglass Laminates

价格:¥16,030.1502

现货: 201

品牌:ROGERS

品类:High Frequency Circuit Materials

价格:¥2,393.1651

现货: 200

现货市场

查看更多

暂无此商品

海量正品紧缺物料,超低价格,限量库存搜索料号

查看更多

授权代理品牌:接插件及结构件

查看更多

授权代理品牌:部件、组件及配件

查看更多

授权代理品牌:电源及模块

查看更多

授权代理品牌:电子材料

查看更多

授权代理品牌:仪器仪表及测试配组件

查看更多

授权代理品牌:电工工具及材料

查看更多

授权代理品牌:机械电子元件

查看更多

授权代理品牌:加工与定制

世强和原厂的技术专家将在一个工作日内解答,帮助您快速完成研发及采购。
我要提问

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

研发客服
商务客服
服务热线

联系我们

954668/400-830-1766(工作日 9:00-18:00)

service@sekorm.com

投诉与建议

E-mail:claim@sekorm.com

商务合作

E-mail:contact@sekorm.com

收藏
收藏当前页面