Keysight Introduces 2GHz Real-Time Spectrum Analysis Solution for Satellite Communications Operators

时间： 2023-03-17 来源：Keysight News

技术问答

KEYSIGHT Technologies announces a real-time spectrum analysis solution（RTSA solution）enabling up to 2GHz RTSA bandwidth for use with the Keysight N9042B UXA Signal Analyzer. The software-based RTSA solution monitors satellite signals and interference, allowing satellite network operators to provide the highest quality of service (QoS) to users.

As the satellite communications (SATCOM) industry moves to high-throughput satellites, satellite network operators are experiencing increased satellite signals and interference. Signal interference has been further complicated for satellite operators with the auction of traditional SATCOM frequency bands to terrestrial wireless operators. To ensure high QoS, satellite operators need to perform rigorous and accurate signal interference monitoring in real-time to identify anomalies and mitigate service degradation.

Keysight's RTSA solution addresses this challenge by enabling the N9042B UXA Signal Analyzer to conduct continuous, gapless capture and analysis of elusive and transient signals with industry-leading optical data interface (ODI) streaming up to 2GHz.

The RTSA application software offers the following benefits:

Reduced Analysis Time: Keysight's advanced field-programmable gate array (FPGA) technology enables a multi-threaded and parallelized RTSA measurement up to 2GHz bandwidth to minimize the time gap between processing/rendering and re-capturing signals. This reduces analysis time and improves the probability of intercept.

Support for Wide Bandwidth Analysis: With support for ODI streaming at up to 2GHz to RAID storage, the Keysight RTSA test solution enables rapid, wide bandwidth streaming and capture of hours of signal recordings for analysis.

Digital Twin Innovations: Based on Keysight's design and emulation expertise, the RTSA solution can accelerate innovation using digital twins that speed the design and testing of satellite payloads, lower prototyping costs, and speed time-to-market.

Runs on Proven Keysight Technology: The RTSA solution is designed to run on the N9042B UXA Signal Analyzer, an industry-leading signal analyzer/spectrum analyzer that tests millimeter-wave performance in 5G, satellite, and radar. When combined with the V3050A Frequency Extender for unbanded frequency coverage to 110GHz, the U9361 RCal Receiver Calibrator, the M9484B VXG Signal Generator, and the powerful PathWave X-Series and PathWave Vector Signal Analysis measurement applications, the N9042B UXA analyzer provides real-time spectrum analysis bandwidth to 2GHz and streaming bandwidth to 2GHz for satellite communication systems.

Greg Patschke, General Manager of Keysight's Aerospace / Defense and Government Solutions Unit, said: "With the introduction of our 2GHz real-time spectrum analysis solution, Keysight is enabling innovators to push the boundaries for system performance in the satellite communication industry. By working with a partner like Keysight that can contribute both system-level modeling software and radio link emulation, satellite network operators can use digital twins to reduce risk and cost while accelerating system development."

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由Vicky转载自Keysight News，原文标题为:Keysight Introduces 2 GHz Real-Time Spectrum Analysis Solution for Satellite Communications Operators，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Keysight Expands eCommerce Offering； Adds New Software Bundles

Keysight Technologies expanded the company‘s software eCommerce offering and added a new software “bundle and save“ program for customers in North America and Europe. Keysight‘s new software eCommerce offering expands the portfolio of software available for purchase online to more than 300 test, application and design software packages. It provides customers with access to the latest test, measurement and design software for rapid, self-serve purchase and derive continuous value to support digital transformation.

厂牌及品类发布时间 : 2021-09-20

Keysight PathWave System Design 2023 Software Accelerates RF System Design and Digital Mission Engineering Workflows for 5G Non-Terrestrial Networks

PathWave System Design 2023 software supports engineers working in radio frequency integrated circuits (RFIC), sub-assembly, and mission or system-of-systems applications by connecting system, baseband, and hardware verification tools in a complete RF system modeling workflow.

厂牌及品类发布时间 : 2022-10-18

Keysight and CTTL Complete First CTIA MIMO Over-the-Air Dynamic Channel Model Test System Validation

Keysight has built the first MIMO over-the-air (OTA) dynamic channel model test and user equipment (UE) performance validation system with China Telecommunication Technology Labs (CTTL) based on CTIA requirements for the 5G New Radio (NR) FR1 frequency band.

厂牌及品类发布时间 : 2023-08-05

Signal Analysis in 5G NR Base Station Transmitters: Part 2

In this blog, Keysight will discuss the transmit signal quality in 5G NR base stations from the perspective of signal analysis (spectrum analysis), according to 3GPP standards.

设计经验发布时间 : 2022-07-05

什么原因使得在计算机上运行的 Keysight 89601A 分析仪软件无法连接到 X 系列分析仪？

在外部计算机上运行的 89601A 分析仪软件与 X 系列信号分析仪之间要想成功建立连接，必须循序以下步骤 1) 检查 89600 VSA 软件和 X 系列信号分析仪固化软件的兼容版本点击 Help、About VSA，查看软件版本按下 System、Show、System，查看固化软件版本 2) 信号分析仪应用软件在 X 系列信号分析仪上运行 3) 在 Connection Expert 中正确配置 PC LAN 接口 LAN 是唯一得到支持、可以连接至 X 系列信号分析仪的接口 4) 配置 X 系列信号分析仪，作为 89600 软件使用的测量硬件在启动 89601A 软件后，点击 Utilities、Hardware 如果选中了“Simulated Hardware”，取消选中在 ADC1 选项卡上，选择 X 系列信号分析仪，应取消选中所有其他选项卡上的复选框单击 OK 5) 有些故障可能妨碍 VSA 连接到 X 系列信号分析仪在计算机上运行的 89601A 连接到软件版本为 A.08 或更高的 X 系列信号分析仪。该组合将显示错误 Runtime Version Mismatch，直到在运行 89601A 的计算机上安装了新注册秘钥。如果校正 89601A 错误“Runtime Version Mismatch” 89601A 软件和 X 系列信号分析仪固化软件的不兼容版本当从外部计算机连接时，网络配置必须允许计算机（在 windows 命令提示符下）使用分析仪的 IP 地址和计算机名“ping”该分析仪。（通过按 System、Show、System 可以在分析仪上查看这两个参数）。如果这些 ping 之一出现错误，您可以通过在 C:\Windows\system32\drivers\etc\hosts 添加一行命令，定义分析仪的 IP 地址和计算机名，来解决这个网络配置问题。在阻碍 TCPIP 通信的计算机或分析仪上安装的防火墙软件。试着临时禁用防火墙，查看这个办法是否解决了问题。

技术问答发布时间 : 2019-08-08

解析信号分析仪在无线通信中的关键作用

在这个信息爆炸的时代无线通信已经成为我们生活中不可或缺的一部分。无论是手机、无线网络还是卫星通信，背后都有一个共同的英雄——信号分析仪。本文，就来和KEYSIGHT一起探索这个奇妙的无线电世界。了解信号分析产品如何帮助我们实现更高效、更可靠的通信。

技术探讨发布时间 : 2024-06-18

Millimeter Wave Frequency Extenders:From Virginia Diodes Inc. for the Keysight X-Series Signal Analyzers TECHNICAL OVERVIEW

型号- WR1.0,WR1.5,WR5.1,N9029AV2B,WR3.4,WR10,N902AV2B,WR12,WR15,WR2.2SAX,WR10SAX,WR1.5SAX,N9029AV1B,E8267D,WR2.8,WR6.5,N9029AV15-BF2,N9029AV15-BF3,N9029AV15-BF1,N9029AV15,N9029AV15-BF4,N9029AV15-BF5,N9029AV10,N9029AV12,N9029AVXX-UDC,N9029AV12-BF4,N9029AV12-BF3,N9029AV12-BF2,WR6.5SAX,N9029AV12-BF1,N9029AH12,WR2.2,N9029AH15,WR4.3,N9029AH10,WR8.0,WR1.0SAX,WR2.8SAX,M8190A,N9029AV08,N9029AV03,WR8.0SAX,N9029AV05,N9029AV06,WR15SAX,N9029AVXX,N9029AV01,N9029AV02,WR3.4SAX,N9029AH05,N9029AH08,WR12SAX,WR5.1SAX

商品及供应商介绍 - KEYSIGHT - April 3, 2020 PDF 英文下载

N9040B UXA Signal Analyzer Service Guide

型号- N9040B

用户指南 - KEYSIGHT - Edition 1 - April 2020 PDF 英文下载

M9484C VXG and V3080A Vector signal generator and frequency extender DATA SHEET

型号- M9484C-508,V3080A-F06,M9484C-506,V3080A-F07,M9484C-514,M9484C-544,M9484C-532,M9484C-554,M9484C-520,M9484C VXG,V3080A-F09,V3080A,V3080A-F11

数据手册 - KEYSIGHT - September 25, 2023 PDF 英文下载

【经验】是德科技分享X系列频谱分析仪的测量使用技巧

本文我们以一个基本的放大器为例，用频谱仪来测量它的谐波、杂散、互调等基本参数，并评估在5G NR信号下的邻道功率比（ACP），CCDF等参数，将带大家看看是德科技的X系列频谱分析仪在这些测量中我们需要注意些什么。

设计经验发布时间 : 2022-06-11

Optimize Signal Quality In 5G Private Network Base Stations

There are a variety of options to meet any 5G private network requirement with Keysight‘s signal analyzer portfolio. Using the N9032B and N9042B, you can perform the most accurate signal analysis for FR1 and FR2 applications.

设计经验发布时间 : 2022-08-20

PathWave Vector Signal Analysis (89600 VSA)

型号- 89604C,89601PSMC,89602C,89601BHQC,89601DVBC,89601CC1C,89600 VSA,89601AYAC,89601BHMC,89601B7RC,89601BHGC,89603C,89601CC2C,89601BHXC,89601CSDC,89601B7NC,89601BAXC,89601C,89601BHPC,89601BHTC,89601BHHC,89601BHNC,89601200C,89601101C,89601EVMC,89601301C,89601BHFC

商品及供应商介绍 - KEYSIGHT - September 29, 2023 PDF 英文下载查看更多版本

Keysight（是德科技）汽车测试产品选型指南（英文）

目录- Increasing Speed, Safety, and Reliability of In-Vehicle Communications Networks Data Acquisition for Accurate Automotive System Analysis Taming the Hostile RF World of Today’s Vehicles Managing Power in a Harsh Automotive Electrical Environment EMI Pre-Compliance Testing for Automotive Designs Handheld Instruments for Accurate Portable Automotive Testing General Bench Test and Accessories Test Automation with PathWave BenchVue Software

型号- N7026A,DAQ970A,4000 X,N2790A,N6705C,N5166B CXG,N6700 SERIES,3000T X-SERIES,N6700,3000T X,34980A,S-SERIES,6000 X,N9000B CXA,N7900,4000 X-SERIES,MSOX4154A,6000 X-SERIES,N7900 SERIES

选型指南 - KEYSIGHT - October 31, 2022 PDF 英文下载

我正在使用 Keysight N7609B 与 X 系列信号发生器，在不连接 Signal Studio 的条件下，能否生成一个实时 GNSS 信号？

如果您使用已保存的情景文件，那么您能够生成一个实时 GNSS 信号；如果您使用连续情景生成模式，则不能。对于已保存的情景文件，您在完成 GNSS 设置后可以点击“State On”按钮，把情景文件下载至 EXG/MXG，开始播放信号；随后点击“State Off”即可重新控制信号发生器的前面板。把仪器状态保存到寄存器。现在断开 PC 连接。如欲播放这个情景，可以调用寄存器，按下前面板上的以下按键：Mode（模式）> Real-time Applications（实时应用）> GNSS > GNSS On（GNSS 接通）。在连续情景生成模式中，N7609B 每隔几分钟就会计算新的情景数据并将结果下载到 EXG/MXG。因此，您必须运行与 EXG/MXG 建立数据连接的 Signal Studio 软件，以确保情景数据实时更新。

技术问答发布时间 : 2019-08-16

Signal Generators: The Different Types and How They Work

In electronics, signals are analogous to speech. Just as we exchange information through conversation, electronics at all levels talk via signals — from microscopic transistors on tiny integrated circuits up to consumer devices and large systems like satellites. Being this ubiquitous means that in every industry, a substantial part of electronics testing goes into getting the signals right, and signal generators are the workhorses that make it possible.

技术探讨发布时间 : 2024-03-08