Diotec Provides Correct Bending and Cutting Services of Axial Lead Wires

时间： 2021-04-13 来源：Diotec

代理服务

技术支持

现货查询

批量订货

Like flower stalks do not like to be buckled, also axial leads of semiconductor diodes require a certain, "sensitive" treatment, in order to reach a long lifetime of the part.

Axial lead devices are still used in huge volumes for many kinds of applications. Especially in (very) high voltage circuits they provide superior creepage and clearance over "small" SMD components. Before such parts can be assembled into the PCB, their lead wires need to be cut and bent for the desired length and raster. If this mechanical process is done in the wrong way, especially with no or no sufficient strain relief, a (pre-)damage of the semiconductor chip is likely. At best the part is broken immediately and can be replaced, but in worst case it will appear only later in the field with all the unwanted and unnecessary consequences. Our Application Note describes how the cutting and bending has to be done the right way, for high productivity and high reliability of the produced circuits.

And if you let us do the entire process for you, you can be assured that all components arrive in perfect shape and quality at your site. You just need to assemble it! Send your mechanical drawing or even a sketch of how you would like to have the leads formed to your authorized DIOTEC sales channel--Sekorm, and we will provide you our offer for this customer service.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由ChangeArmy转载自Diotec，原文标题为:Correct Bending of Axial Lead Wires: Let us do it for you!，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Diotec Linear Voltage Regulators - Stable Output Voltage at Low Costs

Diotec‘s new linear voltage regulators are designed for high performance operation, coming in the industry-standard packages such as SOT-223, SOT-23, SOT-89, TO-92 and SO-8.

2020-09-15 - 新产品代理服务技术支持现货查询批量订货

Ultra Low Power LDO Designed for Low-Power Electronics and Battery Operated Systems | Diotec

The LDI812C-3.3SFA from Diotec is a CMOS based high voltage low-dropout positive voltage regulator, specifically designed for low-power electronics and battery operated systems where power savings are decisive. This device can be operated at a wide range of input voltage up to 16 V. It features a fixed output voltage of 3.3 V and output current rating of 50 mA. Dropout voltage is as low as 230 mV and quiescent current ultra-low at typically 1 µA.

2021-05-25 - 新产品代理服务技术支持现货查询批量订货

【产品】Diotec推出8A的S8A~S8M系列SMD整流二极管，用于构建高浪涌电流的整流桥

在桥式整流器中，采用4个分立的贴片二极管替代通孔桥式整流器会受限于候选二极管正向浪涌电流额定值太低，而Diotec推出的SMC封装的S8A~S8M系列整流二极管是该类问题有力的解决方案。

2021-03-12 - 新产品代理服务技术支持现货查询批量订货

Diotec（德欧泰克）成立于1973年，致力于半导体二极管和整流器的研发生产，具备成套的专项技术，拥有从晶圆和芯片的生产到组装测试和封装一整条产线，产品涵盖5000余种料号，600多种车规，包括二极管，三极管，肖特基二极管，稳压管，TVS（保护器件），整流器等。

肖特基二极管高压二极管快恢复二极管快恢复整流二极管瞬态抑制二极管桥式整流器三极管保护器件二极管

代理服务线上商城技术资料

DIOTEC Rectifiers选型表

DIOTEC 整流器/Rectifiers 包含超快恢复整流器,单相桥式整流器,快恢复二极管,高压整流管,超快回收整流器,标准回收整流器，提供以下参数选型：Repetitive Peak Reverse Voltage VRRM[V]：50-24000；Junction Temperature Tjmax [℃]：120-200

产品型号	品类	Type	Package	Repetitive Peak Reverse Voltage VRRM[V]	Maximum Average Forward Rectified Current IFAV[A]	Junction Temperature Tjmax [℃]	Peak Forward Surge Current IFSM[A]	Forward Voltage VF[V]	Forward Voltage IF[A]	Leakage Current IR[A]	Leakage Current VR[V]
ABS10	Single Phase Bridge Rectifiers	SMD	SO-DIL ABS 4mm	1000	0.8	150	27	1.1	0.8	5	1000

选型表 - DIOTEC 立即选型

Wireless Charging Station for your Mobile, Watch, and Earpods Powered by Diotec‘s MOSFET DI048N04PT

Diotec‘s DI048N04PT MOSFETs come in a space-saving QFN3x3 package but still deliver an Id of 48A at a Vds of up to 40V, making it ideal for small but powerful wireless charging applications.

2024-07-27 - 应用方案代理服务技术支持现货查询批量订货

DIOTEC MOSFETs选型表

DIOTEC提供以下参数选型： Drain Source Voltage VDS[V]:-100~700、Drain Current ID[A]：-70~280、Junction Temperature Tjmax[℃]：150~175、Power Dissipation Ptot [W]：0.2~425、Peak Drain Current IDM [A]：-350~1200、Threshold Voltage VGSth[V]：-4~4.2、On-Resistance RDSon[Ω]：0.0013~15、On-Resistance ID[A]:-30~100、On-Resistance VGS[V]：-10~10、Turn-OnTime ton[ns]：3~1206、Turn-Off Time toff[ns]：7~991

Drain Source Voltage VDS[V]

Drain Current ID[A]

Junction Temperature Tjmax[℃]

Polarity pol

Power Dissipation Ptot [W]

Peak Drain Current IDM [A]

Threshold Voltage VGSth[V]

On-Resistance RDSon[Ω]

On-Resistance ID[A]

On-Resistance VGS[V]

Turn-OnTime ton[ns]

Turn-Off Time toff[ns]

选型表 - DIOTEC 立即选型

Make Sure Your Car Is Ready for The Next Trip with Diotec‘s ESD Protection Diodes ESD5B5V0WT-AQ

Diotec‘s ESD5B5V0WT-AQ is the ideal automotive-grade ESD protection device for capacitive touch displays. Supplied in a SOD-523 package, it will fit in the tightest locations and still provide 50W of peak pulse power dissipation.

2024-07-26 - 应用方案代理服务技术支持现货查询批量订货

Diotec(德欧泰克) 产品及公司介绍

2019年 - DIOTEC - 商品及供应商介绍代理服务技术支持现货查询批量订货

DIOTEC ESD Protection&Transient Voltage Suppressor Diodes选型表

提供了Diotec ESD保护二极管&瞬态电压抑制器二极管选型，Junction Temperature Tjmax[℃]：125-200℃，Maximum Clamping Voltage IPPM[A]：0-446A

Breakdown Voltage VBRmin[V]

Breakdown Voltage VBRmax[V]

Breakdown Voltage IT[mA]

Peak Pulse Power Dissipation PPPM[W]

Junction Temperature Tjmax[℃]

Stand-off Voltage VWM[V]

Maximum Reverse Current ID @ VWM[µA]

Maximum Clamping Voltage Vc[V]

Maximum Clamping Voltage IPPM[A]

1.0SMBJ28CA

Transient Voltage Suppressor Diodes

选型表 - DIOTEC 立即选型

Inductive Charging Toothbrush Wirelessly Powered with Diotec‘s Zener Diodes Z1SMA47

Diotec‘s Zener Diodes Z1SMA47 are installed in the inductive charging toothbrush charging base. The input circuit is clever: It is a capacitive power supply and an oscillator. A part of it is the Zener with 1.5W and 47V in the package DO-214AC/SMA. It allows it to meet the standby power requirement of less than 1W.

2024-07-25 - 应用方案代理服务技术支持现货查询批量订货

Diotec Offers a Wide Range of Small Signal Components: Performance without Compromise

Diotec offers a wide range of small signal components including high-speed Switching Diodes, Zener Diodes, ESD Protection Diodes, Voltage Regulators, Bipolar Transistors and MOSFETs. Package sizes are 0603, 1608, SOT-23, SOT-323, SOT-363, SOT-26, SOD-523, (Power)SOD-323, SOD-123(F/FL), SOD-106 and SOD-80C. With the exemption of the last two packages, all of these are totally free of lead (Pb), with other words fully RoHS compliant without any exemption.