How to Select External Capacitors for Passive Crystal Oscillators?
Firstly, it should be noted that any crystal oscillator that requires an external capacitor is a passive crystal oscillator. Additionally, note that distinguishing between external capacitors C1 and C2 (ground capacitance, ground capacitance) is not equivalent to crystal oscillator load capacitance (CL). C1 and C2 are the total capacitance values of the circuit board and components including IC and crystal oscillator.
In general, increasing the external capacitance of a passive crystal oscillator will cause a decrease in the oscillation frequency of the crystal oscillator, which is biased toward the negative direction.
For example, if the external capacitance of a passive crystal oscillator at 12MHz is 18PF, the actual output frequency is 12.002876MHz. After changing the external capacitance to 27PF, the actual output frequency of the crystal oscillator will decrease, such as 11.9998923MHz.
The larger the external capacitance of the crystal oscillator, the more stable the oscillation of the crystal oscillator, but it will increase the oscillation time, which means the crystal oscillator starts slowly. The principle is that the external capacitance will store more charges, which reduces the current intensity, thereby reducing the excitation power provided by the circuit to the crystal oscillator for oscillation.
When the output waveform of a passive crystal oscillator experiences peak shaving or distortion, this is usually caused by current overdrive.
It can be solved by connecting a resistor in series, with a resistance value typically ranging from tens of kΩ to hundreds of kΩ. If you want to stabilize the waveform, you can try paralleling a 1M feedback resistor.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由ll转载自SJK News,原文标题为:External Capacitor Dependance,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
Solutions for Large Frequency Deviation in Both Active and Passive Crystal Oscillators
What should I do if the frequency deviation of the crystal oscillator is too large? There are two types of crystal oscillator application solutions: active crystal oscillator solutions and passive crystal oscillator solutions.
设计经验 发布时间 : 2023-07-29
晶科鑫(SJK)晶体振荡器选型指南(简版)
描述- SJK founded in 1989,is a manufacturing-type enterprise of frequency control products.It owns independent brand SJK and complete product line including small SMD crystal oscillator,traditional DIP crystal and oscillator,high-end oscillator(including OSC,VCXO,TCXO,OCXO,VC-TCXO,LVDS/PECL output),SAW device,crystal filter(MCF) and other products.
型号- 7W,3S,7X,7Y,7Z,3V,3X,8N,8T,8W,5VH,7VH,9D,6LC,5D,9J,7DU1,5H,9M,5J,9N,7DU5,9P,9T,5P,1N,5S,9X,5T,5V,5X,1X,6A,6B,6C,6D,6E,6MF,5X2,6F,6G,6MH,6I,6K,7DUT,6N,2N,6S,6T,6V,6X,CF,6Z,2X,6RF,7B,6AW,6RH,7E,7F,3D,7H,7I,7J,7K,7L,3H,7M,7N,3J,7P,7Q,3N,7R,7S,7T,3P,7U,7V
SJK-7HF6250M3C0420F9 Crystal oscillator SMD HCSL Output 7.0*5.0*1.8 SPECIFICATION
型号- 7H SERIES,SJK-7HF6250M3C0420F9
1NP74250G18YC Crystal oscillator SMD CMOS Output 2.0×1.6×0.75mm SPECIFICATION
型号- 1NP SERIES,1NP,1NP74250G18YC
电子商城
现货市场
登录 | 立即注册
提交评论