Nisshinbo will start production of the NT1191 (LNA for Multi-band GNSS) and the NT1192 (LNA for 1.2-GHz-band GNSS), for high-precision GNSS in June
NISSHINBO Micro Devices Inc. will start production of the NT1191 and the NT1192, low noise amplifiers (LNA), for high-precision GNSS, including GPS, GLONASS, BeiDou, and Galileo in June.
The NT1191 is a wide-bandwidth LNA for multi-band GNSS (1164 MHz to 1610 MHz) and the NT1192 is a 1.2-GHz LNA for L5/L2/L6 bands (1164 MHz to 1300 MHz). See Figure 1 for both products.
Figure 1. Operating Frequency of the NT1191 and the NT1192
In recent years, the number of equipment that requires high-precision location information, such as automobiles, drones, and wearable devices, has been increasing. For high-precision positioning, it is necessary to have multi-band capability to receive signals of the 1.2-GHz band in addition to the conventional 1.5-GHz band. We will further add LNA products for high-precision GNSS to our product lineup.
NT1192 (EPFFP6-FA package [0.7×1.1×0.37mm]) and NT1191 (DFN1616-6-GE package [1.6×1.6×0.78mm])
NT1191 Features
1. Gain Flatness and Low Noise Figure (NF) in All GNSS Bandwidth
Gain flatness and low noise figure (NF) is achieved in all GNSS bandwidths, from 1164 MHz to 1610 MHz.
It contributes to reducing the difference in receiving sensitivity between bands when receiving multi-band signals.
2. Wide Range of Operating Voltage
It supports a wide range of operating voltage from 1.5 to 5.5 V and can operate with a variety of supply voltages.
3. Wettable Flank Package
By mounting in a package with a wettable flank structure, it can be applied to automatic visual inspection, which is often required in automotive equipment, etc.
NT1192 Features
1. High Gain and Low Noise Figure (NF) in the 1.2-GHz Band
In the 1.2-GHz band (1164 MHz to 1300 MHz), a high gain of 20 dB and a low noise figure (NF) of 0.7 dB are achieved.
2. Small and thin Package
It is mounted in a small, 0.7 × 1.1 mm, and thin leadless package, which is suitable for mobile devices.
Requiring only two external components achieves a reduction in the mounting area.
Product Overview
Example of Applications
- |
- +1 赞 0
- 收藏
- 评论 0
本文由西瓜头头大转载自Nisshinbo，原文标题为:Start Production: the NT1191, LNA for Multi-band GNSS, and the NT1192, LNA for 1.2-GHz-band GNSS，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
【IC】日清纺用于GNSS的高增益低噪声系数LNA “NJG1187A-A”上市，支持L1/L2/L5/L6频段
日清纺微电子发布一款用于GNSS的高增益射频低噪声放大器NJG1187A-A，符合AEC-Q100 Grade 2和VDA 6.3等车规级芯片认证及审核标准。支持1.5GHz频带和1.1～1.2GHz频带。
Nisshinbo‘s GNSS Wideband ＆ 1.2-GHz-band Low Noise Amplifiers NT1191 and NT1192, especially designed for high-precision GNSS receiver applications
NT1191 and NT1192 are the two newest LNA ICs of Nisshinbo Micro Devices and are added to the extensive portfolio of high-quality RF products. They are specially designed for high-precision GNSS receiver applications.
Nisshinbo‘s High-gain GNSS LNA NJG1187A-A for L1/L2/L5/L6 Conforms to AEC-Q100 Grade 2, VDA 6.3
Nisshinbo has launched the NJG1187A-A high-gain GNSS LNA, which conforms to AEC-Q100 Grade 2, VDA 6.3, and other standards for automotive components, for Global Navigation Satellite System (GNSS) such as GPS, GLONASS, BeiDou, and Galileo in May 2023.
【选型】中科微射频产品（导航LNA芯片/LOT FEM/射频开关）选型指南
目录- 导航LNA芯片 IOT FEM（前端射频模组芯片） 高性能LNA芯片 通用射频开关
型号- ATR2701,ATR2037,AT2401C,SKY67022,RFX2402E,AT2402E,RFX2401C,SKY67153,SKY67151,TQP3M9037,ATR2092,TQL9092,ATR5179,SKY67159,AS-179-LF,MAX2659,ATR2035,AT2659,ATR2034,ATR2660,ATR2032,ATR2031,AT2659S
【应用】国产4.4mA L1频段低噪声放大器用于GPS导航定位天线，噪声系数低至0.71dB
在GPS导航定位天线应用中，需要使用LNA来放大从GPS卫星接收到的微弱信号，可以使用一级LNA或者两级LNA(大约27dB)，采用两段式LNA可以增加信号放大的能力，但是同时也会增加噪声系数和功耗，在此推荐拥有低工作电流的中科微AT2659。
日清纺两款新品射频低噪声放大器NT1191和NT1192进入量产，助力实现高精度GNSS
日清纺将于6月开始量产用于高精度GNSS的NT1191和NT1192两款射频低噪声放大器(LNA)。NT1191是一款支持多频段GNSS的宽带LNA，而NT1192是一款支持L5/L2/L6频段的1.2GHz LNA。
【选型】GPS有源天线用LNA可选国产MS2691，支持L1、2双频段，增益至高22dB且功耗仅4.4mA
GPS有源天线在导航定位的产品中应用非常广泛，对LNA产品的低噪声系数、低功耗会有一定的要求。对此，瑞盟的MS2691低噪声放大器是个不错的选择。 典型功率增益在19dB左右@1.2GHz，功率增益达22dB@1.5GHz。
【应用】国产全频段低功耗LNA低噪声放大器MS2691用于GPS有源天线，增益可达19dB
GPS有源天线内需要用到LNA低噪声放大器，本文推荐瑞盟科技推出的MS2691，能覆盖1164～1615MHz全频段、其典型功率增益为19dB，在L1频段窄带应用更是能达到21dB，典型噪声系数为1.0dB。
FMLN16T低噪声GPS放大器
描述- FMLN16T是一款专为GPS、GLONASS、Galileo和北斗标准设计的低噪声放大器（LNA）。该产品具有高增益（18.0dB）、低噪声系数（0.75dB）、低功耗（7.0 mA）和极小的封装尺寸（1.1mmx0.7mmx0.45mm）等特点。
型号- FMLN16T
【应用】低噪声放大器ATR2660S应用于GPS有源天线，L1增益达26.85dB，噪声低至1.18dB
GPS已经广泛应用于导航和无线车载中，为使用无线设备的提供定位功能，GPS天线分为有源天线和无源天线，其中GPS有源天线需由陶瓷天线、滤波器、LAN（低噪声信号模块）、线缆组成，在此应用中推荐一款中科微覆盖L1频段的LNA（低噪声放大器）ATR2660S，
用于全球导航卫星系统（GNSS）的SK5119S LNA
描述- SK5119S是一款专为全球导航卫星系统（GNSS）设计的低噪声放大器（LNA），适用于GPS、GLONASS和Galileo标准。该产品具有极低的噪声系数（0.8dB）、19.5dB增益和优异的线性度。它工作在1.6V至3.0V的单电源电压范围内，功耗低，且采用小型DFN 6引脚封装。
型号- SK5119S
1004138带LNA的GPS陶瓷贴片天线规格书
描述- 本资料介绍了KYOCERA AVX生产的GPS陶瓷贴片天线带低噪声放大器（LNA）的产品。该产品适用于GNSS系统、全球嵌入式天线系统和卫星定位系统，旨在为手持设备、媒体播放器和移动通信设备提供高性能和小型化设计。
型号- 1004138
【应用】日清纺汽车级射频前段用于汽车GPS有源天线，集成LNA和SAW滤波器，带外抑制＞43dB
GPS导航是应用最广泛的一种方式，GPS导航少不了GPS有源天线来实现卫星信号的放大。在前装市场还需要器件过车轨认证，汽车功能的增加，对小型化也有额外的要求。日清纺的NJG1159PHH-A，能够大幅度减少PCB面积，实现有源天线小型化。
【选型】高精度GPS导航模块的低噪声LNA和高带外抑制效果的SAW滤波器推荐
本文介绍的是一个可应用于GPS导航模块中接收部分的方案，主要为读者分享中科微L1频段LNA AT2659和京瓷（KYOCERA）L1频段SAW滤波器SF14-1575F5UUA1的选型参考建议。
SKG8204B Beidou Short Message Module, with Wide Reliability Coverage and Low Cost
SKG8204B is a Beidou-3 regional short message communication module, which integrates core chips such as LNA low-noise amplifier, RF transceiver signal filter, short message RF baseband integrated processor, PA power amplifier, etc. This module can be embedded into the entire product, and basic functions such as sending and receiving short message information and location reporting in the Beidou No.3 area can be achieved by connecting to an external Beidou SIM smart card and a Beidou passive antenna for short messages.
电子商城
现货市场
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论