Nisshinbo will start production of the NT1191 (LNA for Multi-band GNSS) and the NT1192 (LNA for 1.2-GHz-band GNSS), for high-precision GNSS in June
NISSHINBO Micro Devices Inc. will start production of the NT1191 and the NT1192, low noise amplifiers (LNA), for high-precision GNSS, including GPS, GLONASS, BeiDou, and Galileo in June.
The NT1191 is a wide-bandwidth LNA for multi-band GNSS (1164 MHz to 1610 MHz) and the NT1192 is a 1.2-GHz LNA for L5/L2/L6 bands (1164 MHz to 1300 MHz). See Figure 1 for both products.
Figure 1. Operating Frequency of the NT1191 and the NT1192
In recent years, the number of equipment that requires high-precision location information, such as automobiles, drones, and wearable devices, has been increasing. For high-precision positioning, it is necessary to have multi-band capability to receive signals of the 1.2-GHz band in addition to the conventional 1.5-GHz band. We will further add LNA products for high-precision GNSS to our product lineup.
NT1192 (EPFFP6-FA package [0.7×1.1×0.37mm]) and NT1191 (DFN1616-6-GE package [1.6×1.6×0.78mm])
NT1191 Features
1. Gain Flatness and Low Noise Figure (NF) in All GNSS Bandwidth
Gain flatness and low noise figure (NF) is achieved in all GNSS bandwidths, from 1164 MHz to 1610 MHz.
It contributes to reducing the difference in receiving sensitivity between bands when receiving multi-band signals.
2. Wide Range of Operating Voltage
It supports a wide range of operating voltage from 1.5 to 5.5 V and can operate with a variety of supply voltages.
3. Wettable Flank Package
By mounting in a package with a wettable flank structure, it can be applied to automatic visual inspection, which is often required in automotive equipment, etc.
NT1192 Features
1. High Gain and Low Noise Figure (NF) in the 1.2-GHz Band
In the 1.2-GHz band (1164 MHz to 1300 MHz), a high gain of 20 dB and a low noise figure (NF) of 0.7 dB are achieved.
2. Small and thin Package
It is mounted in a small, 0.7 × 1.1 mm, and thin leadless package, which is suitable for mobile devices.
Requiring only two external components achieves a reduction in the mounting area.
Product Overview
Example of Applications
- |
- +1 赞 0
- 收藏
- 评论 0
本文由西瓜头头大转载自Nisshinbo,原文标题为:Start Production: the NT1191, LNA for Multi-band GNSS, and the NT1192, LNA for 1.2-GHz-band GNSS,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【产品】采用有源偏置电路的MMIC低噪声放大器ASL122,SOT363封装,适用于GPS、GLONASS等
ASB MMIC低噪声放大器ASL122是适用于全球导航卫星系统接收机应用的平坦增益LNA。采用有源偏置电路,可根据温度和工艺的变化稳定电流。该放大器采用SOT363封装,通过自动测试处理器100%直流和射频测试,适用于GPS、GLONASS等。
Nisshinbo‘s High-gain GNSS LNA NJG1187A-A for L1/L2/L5/L6 Conforms to AEC-Q100 Grade 2, VDA 6.3
Nisshinbo has launched the NJG1187A-A high-gain GNSS LNA, which conforms to AEC-Q100 Grade 2, VDA 6.3, and other standards for automotive components, for Global Navigation Satellite System (GNSS) such as GPS, GLONASS, BeiDou, and Galileo in May 2023.
Nisshinbo‘s GNSS Wideband & 1.2-GHz-band Low Noise Amplifiers NT1191 and NT1192, especially designed for high-precision GNSS receiver applications
NT1191 and NT1192 are the two newest LNA ICs of Nisshinbo Micro Devices and are added to the extensive portfolio of high-quality RF products. They are specially designed for high-precision GNSS receiver applications.
【选型】中科微射频产品(导航LNA芯片/LOT FEM/射频开关)选型指南
目录- 导航LNA芯片 IOT FEM(前端射频模组芯片) 高性能LNA芯片 通用射频开关
型号- ATR2701,ATR2037,AT2401C,SKY67022,RFX2402E,AT2402E,RFX2401C,SKY67153,SKY67151,TQP3M9037,ATR2092,TQL9092,ATR5179,SKY67159,AS-179-LF,MAX2659,ATR2035,AT2659,ATR2034,ATR2660,ATR2032,ATR2031,AT2659S
【应用】低噪声放大器ATR2660S应用于GPS有源天线,L1增益达26.85dB,噪声低至1.18dB
GPS已经广泛应用于导航和无线车载中,为使用无线设备的提供定位功能,GPS天线分为有源天线和无源天线,其中GPS有源天线需由陶瓷天线、滤波器、LAN(低噪声信号模块)、线缆组成,在此应用中推荐一款中科微覆盖L1频段的LNA(低噪声放大器)ATR2660S,
【应用】国产全频段低功耗LNA低噪声放大器MS2691用于GPS有源天线,增益可达19dB
GPS有源天线内需要用到LNA低噪声放大器,本文推荐瑞盟科技推出的MS2691,能覆盖1164~1615MHz全频段、其典型功率增益为19dB,在L1频段窄带应用更是能达到21dB,典型噪声系数为1.0dB。
【选型】GPS有源天线用LNA可选国产MS2691,支持L1、2双频段,增益至高22dB且功耗仅4.4mA
GPS有源天线在导航定位的产品中应用非常广泛,对LNA产品的低噪声系数、低功耗会有一定的要求。对此,瑞盟的MS2691低噪声放大器是个不错的选择。 典型功率增益在19dB左右@1.2GHz,功率增益达22dB@1.5GHz。
GPS有源天线和GPS无源天线的区别——AGPS25A-60C、AGPS25P-60C为例
GPS有源天线一般就是要供电的天线模块,是由陶瓷天线、LNA(低噪声信号模块)、线缆、接头组成。GPS无源天线主要是陶瓷介质,而且大多数是正方形设计,尺寸有25*25到12*12mm,并且面积越大,共振的频率越高。本文介绍GPS有源天线和GPS无源天线的区别。
【应用】日清纺汽车级射频前段用于汽车GPS有源天线,集成LNA和SAW滤波器,带外抑制>43dB
GPS导航是应用最广泛的一种方式,GPS导航少不了GPS有源天线来实现卫星信号的放大。在前装市场还需要器件过车轨认证,汽车功能的增加,对小型化也有额外的要求。日清纺的NJG1159PHH-A,能够大幅度减少PCB面积,实现有源天线小型化。
电子商城
现货市场
登录 | 立即注册
提交评论