ESP8266 WIFI Module WG219 and WG229 for Smart Home Applications Compliant with 802.11b/g/n Wireless Module Standards
Smart homes are becoming more and more widely used in everyday life. Today Skylab introduces to you two smart control methods to achieve home and remote with the help of a mobile phone APP. Realize the function of smart home data transmission and intelligent control command issuing. The focus is to recommend the UART ESP8266 WIFI Modules WG219 and WG229.
Why recommend ESP8266 WIFI module?
(1) It has an MCU inside, so you can use it as an MCU. Common functions include: IO control, timer, interrupt, PWM, FreeRTOS, UART, IIC, SPI, etc. Therefore, the ESP8266 can perform most of the operations that a microcontroller can perform. However, it is important to note that the ESP8266 has fewer general purpose IOs. If there are more peripheral devices, you need to consider expanding IO.
(2) It can be networked, which is a very important point. Because it is made for the IoT environment, this is its main purpose. Because it is affordable and can be connected directly to WiFi at home or anywhere, it can be a great IoT device.
It detects information from sensors in the working environment, such as temperature and humidity, light intensity, etc. Then it uploads to the server via WiFi. And we can observe the information from home by simply logging into the server.
As long as we can connect to WiFi, we can control the ESP8266 remotely through the network. to achieve device control: door lock, light, rice cooker, air conditioner, curtain, socket, etc.
(3) ESP8266 supports two forms of antenna interface: on-board PCB antenna, IPEX interface, on-board PCB antenna and IPEX interface. Antenna customers can use directly without adding any matching circuit.
How do the ESP8266 WiFi modules WG219 and WG229 perform?
The WG219/WG229 are low power, small form factor UART-WiFi transceiver modules based on the ESP8266 chip. Compliant with 802.11b/g/n wireless module standards, they are designed for mobile devices and IoT applications. It can connect a user's physical device to a WiFi wireless network for networking functions. In addition the WG219/WG229 can be controlled via the serial port using AT commands to meet the networking function requirements.
The WG219/WG229 WiFi modules support the development of applications with SW on-chip ultra-low power devices. This makes the WG219/WG229 an excellent choice for automation and sensor solutions.
The WG219/WG229 has a built-in PCB on-board antenna and an external antenna for IPEX holders. Serial, PWM and GPIO interfaces are available. The SKYLAB ESP8266 WiFi modules WG219/WG229 are currently in volume production. SKYLAB provides full technical support and can customize software functions.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由董慧转载自Skylab,原文标题为:ESP8266 WIFI Module for Smart Home Applications,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
WiFi Module Selection and Introduction of BW3581/3582
Feasycom continues to innovate and launch the BW3581/3582 series, with sizes of 12 * 12 * 2.2mm and 13 * 15 * 2.2mm packaging, supporting 2.4G/5G WI-FI6 module data rates up to 600.4Mbps. IoT applications based on WiFi technology and WiFi modules will become increasingly widespread.
Tiangong Measurement and Control WiFi Module: A Powerful Assistant for Industrial Automation Applications
Industrial automation is the core of modern manufacturing, aimed at improving production efficiency, reducing costs, enhancing product quality, and ensuring the stability of the production process. With the rapid development of information technology, WiFi modules, as a key wireless communication technology, are playing an increasingly important role in the field of industrial automation. It provides a convenient and efficient solution for the interconnection and intercommunication between industrial equipment, promoting industrial automation towards intelligence and networking.
Skylab WiFi6 Module Selection Recommendation
The WiFi6 module is a wireless network communication module that supports WiFi6 technology (IEEE802.11ax) and has various characteristics and advantages.
天工测控WiFi模块选型表
天工测控面向物联网市场中的智慧物流,智能交通,智慧安防,智慧能源,智能医疗,智慧建筑,智能制造,智能家居,智能零售,智慧农业,智慧楼宇等应用场景研发推出了性能强大,且支持二次开发的2.4GHz单频及2.4/5GHz双频UART串口WiFi模块,USB接口WiFi模块,AP/Router无线路由WiFi模块及远距离图传WiFi模块,高清视频传输WiFi模块
产品型号
|
品类
|
无线模块标准
|
芯片
|
尺寸(mm)
|
封装
|
频率范围(GHZ)
|
数据速率(Mbps)
|
发射功率(dBm)
|
传输距离(米)
|
通讯接口
|
供电电压(V)
|
天线接口
|
WG219
|
WiFi模块
|
IoT b/g/n
|
ESP8266
|
25.5*18*3.2
|
SMD
|
2.4-2.5
|
72.2
|
18
|
100
|
3,5,6,8
|
3.3V
|
1个IPEX/PCB
|
选型表 - 天工测控 立即选型
SKYLAB High Performance 2.4g 5g Dual Band UART Wifi Module SKW78,Integrates a Dual Core MIPS1004Kc (880MHz)
SKYLAB SKW78 High Performance 2.4g 5g dual band UART Wifi module,This module is perfectly suitable for 802.11 a/b/g/n/ac Wi-Fi Solution and integrates a dual core MIPS1004Kc (880MHz).
Comparison between Bluetooth Module and WiFi Module
In this article, SKYLAB will make a comparison between Bluetooth module and WiFi module.
Wifi Module MT7628: How to Use Step by Step Guide?
This project SKYLAB will explain in detail how to create a device to measure the level of a water reservoir with graduation from 20% to 20%, to present the results through a Web Server.
WiFi module SKW77 for UVA to Realize WiFi Image Transmission, Transmission Rate up to 300Mbps
In this article, SKYLAB introduces how the drone realizes WiFi image transmission and the long-distance WiFi image transmission application of the high-power WiFi module SKW77.
Wifi Module IoT and Home Automation: What The Future Holds
Today, we have an array of IoT-powered devices around. In the future, we will for sure see more and more devices joining this list with many smart features.SKYLAB will introduce WiFi Module IoT and Home Automation in this article.
The Advantages and Specific Applications of WiFi Modules in Industrial Automation
WiFi modules are widely used in industrial automation due to their advantages such as wireless connection, high bandwidth, wide coverage, easy integration and expansion, and cost-effectiveness. They are widely used in remote monitoring and management of industrial equipment, wireless sensor networks for smart factories, navigation control for AGVs and mobile robots, data collection and transmission for production lines, and connection and communication for industrial IoT platforms, effectively promoting the development of industrial automation.
SKW77+27dBm WIFI模块产品介绍
描述- 本资料介绍了SKW77高功率WiFi模块的技术规格和应用。该模块符合802.11b/g/n WiFi标准,支持高达+27dBm的输出功率,适用于高性能WLAN应用。它基于MT7620A单芯片解决方案,集成802.11n 2x2 MAC/BB/radio,支持多种工作模式和安全功能。
型号- SKW77,MT7620A
【经验】从性能出发,串口Wifi模块ESP8266和ESP32-C3怎么选?
ESP32-C3作为ESP8266的升级版,在工程师关注的性能上,ESP32-C3拥有双核处理器,有更大的RAM、内存,且支持蓝牙和以太网支持等附加功能,速度、内存和GPIO引脚数量都是要优于ESP8266。更关注产品性能,且有蓝牙技术需求优先选择ESP32-C3方案,如果wifi部分就可以满足全部需求,选择ESP8266方案即可。
Wireless Video Relay MT7628N WIFI Module Solution,Supports the Camera Type as A USB-free Drive Camera
SKYLAB can provide wireless video relay solutions based on WiFi technology. It is based on MT7628N WiFi module SKW92A with an integrated 2MP HD camera function. This solution can meet the needs of video relays in different industries such as the IoT, smart campus, smart home, and smart factory.
How to Program 802.11bgn Wifi Module with ESP32 in RTOS?
In this post,SKYLAB will develop a project that contains two tasks, which perform simultaneously by the two ESP32 cores.
WiFi 6 Module SKW3000 Features High Speed, Low Latency, High Stability, and Large Coverage, Becomes The Excellent Connector for Smart Homes
With the continuous development of the smart home market and technological advancements, the application prospects of the WiFi6 module SKW3000 in smart homes will become even broader. In the future, SKW3000 is expected to deeply integrate with more smart home devices to achieve more intelligent control and management. Meanwhile, with the popularization of 5G technology, SKW3000 can also be combined with 5G networks to provide faster and more stable network connections for smart homes.
电子商城
服务
可定制天线工作频段400MHz~77GHz,工作温度-40~+85℃、连接头/电缆类型等性能参数;支持GPS天线、组合天线、低频天线、定位精密测量天线、WIFI天线、5G天线、4G天线等产品定制。
提交需求>
可根据用户的wifi模块,使用无线连接测试仪MT8862A,测试IEEE802.11a/b/g/n/ac (2.4Ghz和5Ghz)设备的TX、RX射频特征,输出测试报告。支持到场/视频直播测试,资深专家全程指导。
实验室地址: 深圳 提交需求>
登录 | 立即注册
提交评论