What is Mini USB WIFI Module and How to Improve Your Wireless Internet Connection?
Using the Mini USB WIFI Module of your internet box is very practical for connecting all your equipment at home! Despite its practicality, a Wi-Fi connection is still less reliable than a wired connection. It can sometimes cause certain inconveniences such as untimely disconnections.This article SKYLAB will introduce What is Mini USB WIFI Module and How to Improve Your Wireless Internet Connection?
Why is the Wi-Fi signal bad?
Before discovering what are the ways to improve your Wi-Fi connection at home. You must first understand why the signal is bad! Not to mention a major disruptive element, especially in densely populated areas: neighbors' WIFI networks. The latest generation mini USB WIFI module makes it possible to overcome this difficulty. But with older equipment, there is still sometimes a cacophony between the different Wi-Fi networks.
You are afraid of having a bad Wi-Fi connection and you wonder what the real speed of your wireless Internet connection is. Measure and analyze the speed of your ADSL or fiber connection with the speed test. This allows you to get an idea ofthe quality of your Wi-Fi connection.
How to improve your wireless internet connection?
You can read our file "Wi-Fi speed: our advice to improve it. You can also make an inventory of mini USB WIFI module internet connection at home. To help you, here are 7 points to check to boost your Wi-Fi internet connection at home.
Place your mini usb wifi well in the house
The internet box very often places in the wrong place in a house. The first very simple advice to put into practice is therefore the optimized placement of your box at home.
The best position for the modem to optimize its mini USB WIFI module internet connection is high up rather than on the ground, in an open area.
Remove metallic elements: can block the waves
It is also necessary to think about moving it away from certain disturbers which can block the waves or cause interference such as metallic elements. And be wary of certain devices that transmit in identical or similar frequency bands (microwaves, baby monitors, wireless landline telephones, etc.).
Large volumes of water, typically aquariums, also constitute a crippling obstacle to wave propagation. Behind them you probably won't have a mini USB WIFI module!
Secure your Wi-Fi access
It is also important to secure your wireless network. Indeed, if the latter is not secure enough. Some people will then be able to use it, which will necessarily slow down your internet connection. To protect your Wi-Fi network at home, log in to your box's control panel.
Change your Wi-Fi network password regularly
Another way to improve your Wi-Fi connection is to change the frequency. If you have a recent Internet box, it is probably "dual band". That is to say, it uses two frequency bands to broadcast the Wi-Fi signal: 2.4 GHz and 5 GHz. The first is the historical band of mini USB WIFI module.
By default, boxes transmit simultaneously on both bands, and computers, smartphones and other tablets connect to one of the two. The best Wi-Fi frequency is then automatically assigned to a given device, generally 5 GHz.
Your modem is not one of the latest boxes equipped with this feature. It is better to create two separate networks: one in 2.4 GHz, the other in 5 GHz. It will be enough to choose the second to be sure to benefit from the best performance in mini USB WIFI module.
Change of Wi-Fi channel can improve internet connection
In this management interface, you will also be able to change the Wi-Fi channel. Know that if you and a neighbor position on the same channel. You share the flow! Changing this channel can therefore improve your internet connection at home.
Some operators offer a scan tool in their management interface to identify the least congested channels. Some apps do it too, like WIFI Analyzer.
If you live in the countryside and find that one of these channels is free, take the opportunity to improve your mini USB WIFI module speed. You will have to resolve to take the least congested. Selecting the other channels (2 to 5 or 7 to 10) will however be of little interest, and may rather penalize your Wi-Fi network.
Activate the DFS channels in the management interface
The most frequented is often the interval 36 to 48: to go beyond, it will be necessary to activate the DFS channels in the management interface of the box. But be careful: from channel 52, the presence on the same ranges of weather radars can cause your box to move without warning to another channel. Also, to be taken into account: the higher the 5 GHz channel, especially above 100, the better the Wi-Fi coverage will be.
Better manage the equipment connected to the mini USB WIFI module
Many devices can be connected to your Wi-Fi network: computer, game console, smartphone, tablet, TV, connected watch, printer, household appliances, etc.). If your speed is limited and all these devices are using the network at the same time. This will inevitably have an impact on the speed of your Wi-Fi internet connection at home.
This is an extreme case, but keep in mind, for example, that some of them regularly update. It is therefore possible that these terminals request the network even when you are not using them.
On the other hand, when several of these devices communicate at the same time on the same Wi-Fi network, they transmit - and receive data in turn. Here too, we can take advantage of the creation of two Wi-Fi networks mentioned above.
Install a repeater for extended mini USB WIFI module coverage
A Wi-Fi repeater is an easy-to-install piece of equipment that can extend Wi-Fi coverage throughout your home. Concretely, this device allows you to recover the signal from your modem to retransmit it further as a Wi-Fi hotspot.
To do this, simply plug the repeater into an electrical outlet and connect it to the box's Wi-Fi network to synchronize it the first time. Once the lights are on, you can plug the repeater into an outlet near the area you want to cover. Some mini USB WIFI module has an indicator to know if the location of the repeater is good.
- |
- +1 赞 0
- 收藏
- 评论 0
本文由扶摇转载自SKYLAB，原文标题为:What is Mini USB WIFI Module: Best Guide to get Max Signals?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。
相关推荐
What You Need to Know ABout Mini USB Wifi Module？
Small USB WiFi modules or adapters help us replace the internal wireless functionality of a computer in the most inexpensive way. Today, SKYLAB will discuss all that you should learn about these mini USB wireless adapters.
设计经验 发布时间 : 2022-01-13
How to Buy WiFi Module Options
In this article, SKYLAB will guide you through the process of buying WiFi module options, highlighting key factors to consider and offering valuable tips to make an informed purchasing decision.
设计经验 发布时间 : 2023-09-02
【经验】天工测控LCS2028模块蓝牙功能使用指导
天工测控LCS2028是一款WiFi+蓝牙 Combo的模块，蓝牙功能除了给WiFi进行配网外，还能作为普通的BLE功能使用，本文指导如何使用LCS2028的蓝牙功能。
设计经验 发布时间 : 2023-01-20
天工测控（Skylab）无线模块选型表
描述- 深圳市天工测控技术有限公司（Skylab M&C Technology Co.,Ltd），是一家专业从事GNSS、WiFi、蓝牙等无线产品的研究和应用的高新技术企业。旨在向国内外OEM/ODM客户以及系统集成商提供高品质、高性能的无线模块和应用方案，致力为客户创造长期的价值和潜在的增长。
型号- SKM2101,WG209,SKG122C,SKM88,SKW92B,SKM89,SKW92A,SKM2102,SKG17DT,SKM2105FR,SKM86,TR6260,SKM2505,MT7612E,SKM2105,MT7688A,SKG12D,SKG122S,SKG12F,SKW496C,SKM2308DR,SKG12A,SKG092C,SKG122Y,SKW497,SKM80,SKM81,SKM82,SKG09BL,SKW3000,SKG093Q,SKG122GR,SKG093N,SKB501,SKG1223,SKG121S,SKG121T,RTL8812,SKM61C,RTL8811,ESP32-H2,MT7610E,SKG12BL,SKM2505NR,SKG16BL,SKG12DT,WG822,SKG123NRD,WG821,SKG12UR,SKM2305NDR,SKM2102SR,SKG09DT,SKM2105QR,MT7601,RTL8821CS,SKM2102CR,SKG123L,SKG122ER,SKG123N,SKG17D,LCS6260,SKG123Q,SKW101,SKW100,SKW103,SKG123NR,SKG121SA,MT7620A,WG243,SKM2308,SKG09,ESP32-S3,SKM2302,SKM2305,SKG123NT,QCA9887,MT7628,SKM-6DM,SKW78,LCS2028,BK7231,SKM2302DR,RTL8822CS,ESP32-C2,MT7981,ESP32-C5,SKM2102ER,SKB380,SKB381,WG239,BL2028,SKG8212,SKM65C,WG233,SKW77,WG231,MT7603E,WG238,ESP8266,WG237,WG236,WG235,ESP32,WG241,QCA9531,WG240,RTL8852,SKM81F,SKG123ND,SKM65,WG229,SKM61,SKM2105DR,SKW17AE,SKB376,WG222,SKB379,SKB378,ECR6600,WG226,WG225,SKB369AA,SKM80D,SKG172T,MT7697D,SKM2101MR,SKM80F,SKG16,SKG17,SKM55,WG219,SKB360,WG217,SKW93A,SKG12,SKB362,SKM51,SKB361,SKM52,SKM53,SKG09D,ESP8285,SKG09F,SKW99,MT7621A,SKG09A,SKB369,WG215,SKG09L,SKM51G,SKM51F,SKM51C,MT7628N,SKB360I,IPQ6000,SKM2105NR
天工测控WiFi模块选型表
天工测控面向物联网市场中的智慧物流，智能交通，智慧安防，智慧能源，智能医疗，智慧建筑，智能制造，智能家居，智能零售，智慧农业，智慧楼宇等应用场景研发推出了性能强大，且支持二次开发的2.4GHz单频及2.4/5GHz双频UART串口WiFi模块，USB接口WiFi模块，AP/Router无线路由WiFi模块及远距离图传WiFi模块，高清视频传输WiFi模块
|
产品型号
|
品类
|
无线模块标准
|
芯片
|
尺寸(mm)
|
封装
|
频率范围(GHZ)
|
数据速率(Mbps)
|
发射功率(dBm)
|
传输距离(米)
|
通讯接口
|
供电电压(V)
|
天线接口
|
|
WG219
|
WiFi模块
|
IoT b/g/n
|
ESP8266
|
25.5*18*3.2
|
SMD
|
2.4-2.5
|
72.2
|
18
|
100
|
3,5,6,8
|
3.3V
|
1个IPEX/PCB
|
选型表 - 天工测控 立即选型
天工测控SKG系列GNSS模块精度差异与RTK技术详解
RTK也称载波相位差分技术，通过对两测站的载波相位观测值进行实时处理，能实时提供测站的三维坐标，并达到厘米级或者毫米级的高精度。深圳市天工测控的RTK模块如SKG122ER等，支持多种配置，通过指令控制基站坐标锁定、伪距平滑、数据输出等，提高定位精度。
技术探讨 发布时间 : 2024-09-06
天工测控WiFi+蓝牙组合模块选型表
天工测控提供如下WiFi+蓝牙组合模块选型，数据速率72Mbps~1201Mbps，SMD封装，多种蓝牙标准可选
|
产品型号
|
品类
|
芯片
|
模块尺寸(L*W*H)（mm）
|
天线
|
封装
|
模块标准IEEE 802.11
|
频率范围(GHZ)
|
数据速率(Mbps)
|
WiFi接口
|
蓝牙标准
|
蓝牙接口
|
|
WG215
|
WiFi+蓝牙组合模块
|
ESP32
|
25.5*18*3.0
|
PCB/IPEX
|
SMD
|
b/g/n
|
2.4
|
150
|
UART
|
V2.1+EDR,BLE4.2
|
UART
|
选型表 - 天工测控 立即选型
天工测控GNSS高精度天线：支持多星座信号接收，精准定位的卓越之选
在现代科技飞速发展的时代，精准定位成为了众多领域不可或缺的需求。天工测控GNSS高精度天线以其卓越的性能特点，为实现高精度定位提供了可靠的解决方案。
产品 发布时间 : 2024-09-05
【选型】交通信号灯高精度天工测控GNSS授时模块选型技巧
交通信号灯在一定程度上能够起到缓解交通压力的作用，而作用其中的GNSS授时模块才是主力高效，准确，实时的对城市交通信号灯进行统一授时的大功臣。本文天工测控就以北斗授时模块为切入点，简单介绍一下交通信号灯授时模块的选型要点。
器件选型 发布时间 : 2021-11-05
【元件】天工测控千兆网WiFi模块SKW78搭载三芯片性能卓越，符合WiFi 5标准
SKW78是深圳市天工测控研发的一款千兆网WiFi模块，该模块符合WiFi5标准，集成3个千兆速度的WAN口或LAN口，搭载三个芯片具有更强的性能。
产品 发布时间 : 2024-07-04
随着授时技术的发展与北斗的崛起，天工测控研发的SKG12DT授时精度达到15ns RMS
深圳市天工测控技术有限公司研发的SKG12DT授时精度达到15ns RMS，是一款高性能GNSS功能超级一体化解决方案计时模块,具有高灵敏度、超低功耗和小体积特性。射频信号通过天线输入道模块,像位置、速度和时间这些串行信息通过nmea协议或自定义协议完整的记录下来。
技术探讨 发布时间 : 2024-08-07
天工测控SKG804M系列北斗卫星通信模组，小巧便捷嵌入式，支持BDS或BDS+INS组合导航定位
北斗卫星导航系统是我国自行研制的全球卫星导航系统，可在全球范围内为各类用户提供高精度、高可靠的定位、导航、授时等服务。天工测控SKG804M系列模块是一款北斗导航定位专用产品，仅接收北斗导航卫星信号（含北斗二号、北斗三号），不接收GPS、GOLONASS、GALILEO等卫星信号。
产品 发布时间 : 2024-06-14
【元件】天工测控WIFI模块SKW92A，工作速率达144Mbps，电源电压3.3V，广泛用于物联网领域
天工测控WIFI模块SKW92A，它包含有一个802.11n MAC和基带、一个2.4GHz无线电和FEM、一个580MHz MIPS CPU、一个5端口10/100快速以太网交换机。并且适用于低功耗、低成本和高集成度的AP路由器和消费电子设备。
产品 发布时间 : 2024-04-16
Qorvo团队莅临天工测控，共探UWB技术新发展，创造更便捷、智能的生活体验！
2024年7月8日，Qorvo团队莅临天工测控，旨在加强双方的战略合作关系，共同推动行业进步。此次拜访聚焦于UWB技术的相关方案讨论。UWB技术作为一项具有巨大潜力的前沿科技，正引领着智能定位、物联网等领域的革新。
厂牌及品类 发布时间 : 2024-07-10
电子商城
服务
深圳市启威测实验室，面向所有企业提供信号完整性测试服务，主要包括USB、HDMI 、DP、MIPI、PCIe 、SD/EMMC、DDR接口信号测试。测试手段有波形测试、眼图测试、抖动测试等。
提交需求>
Ignion可支持多协议、宽频段的物联网天线方案设计，协议：Wi-Fi、Bluetooth、UWB、Lora、Zigbee、2G、3G、4G、5G、CBRS、GNSS、GSM、LTE-M、NB-IoT等，频段范围：400MHz~10600MHz。
最小起订量： 2500 提交需求>
授权代理品牌：集成电路
授权代理品牌：分立元件
授权代理品牌：接插件及结构件
授权代理品牌：部件、组件及配件
授权代理品牌：电源及模块
授权代理品牌：电子材料
授权代理品牌：仪器仪表及测试配组件
授权代理品牌：电工工具及材料
授权代理品牌：机械电子元件
授权代理品牌：加工与定制
我要提问
登录 | 立即注册
提交评论