LC Duplex Fiber Optic Connectors for High Density Environments with the Features of High-reliability, Low-cost And High-density

时间： 2023-12-09 来源：T&S Blogs

技术问答

选型帮助

研发客服

商务客服

1. LC dual-core fiber optic connectors are widely used

Because of its small size, LC connectors are widely used in optical communication networks, data networks and cable TV networks, and are the mainstream products in optical fiber connectors.

In the daily application environment, considering the saving of wiring space, the application of LC duplex connectors is often more common. The LC dual-core fiber optic connector is composed of two single-core connectors combined by a double clip. Compared with the single-core connector, the installation steps are reduced, which saves time and cost.

2. Advantages of LC Duplex Fiber Optic Connectors

LC duplex fiber optic connectors are superior to traditional duplex connectors, and innovatively provide a quick unlocking solution. Compared with the traditional single-joint connector, the double-joint connector can be unlocked by only one pressing.

The design of the two-core connector has two advantages, one is a long handle, and the other is a low handle. The unique design of the long handle is to increase the unlocking range that can be touched by the operator's hand in a high-density wiring environment, which can be easily and quickly unlocked, easy to plug and unplug, and more convenient. A low handle is one where the overall height of the handle does not exceed the height of the compact adapter.

The handle part of the ordinary two-core fiber optic connectors will be slightly higher than the adapter, so that it will take up more space during the wiring installation process. The low handle design of the LC duplex fiber optic connector can save more space. In the high-density environment of the data center, it is a great advantage to combine the space saved by multiple connectors.

Another important advantage is the switchable polarity function. In optical signal transmission, the transmission signal of the optical cable is divided into the receiving end and the transmitting end. The transmission signal (Tx) of the optical fiber link at one end of the optical cable must be matched with the corresponding receiver (Rx) at the other end. This matching is called polarity.

Conventional LC fiber jumpers have great limitations in order to achieve polarity conversion. Special attention should be paid to the direction of polarity conversion to avoid failed terminations, and there is a possibility that the jumper needs to be replaced and re-wiring. The reversible polarity feature makes this operation even easier, and the polarity reversal can be easily accomplished without any tools, saving a lot of time and wiring costs.

With the rapid application of 5G, how to provide a high-density, low-cost, easy-to-manage, and high-reliability network cabling system for data centers has become an increasingly important requirement. The LC duplex fiber optic connector is a high-reliability, low-cost, high-density wiring solution.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由出山转载自T&S Blogs，原文标题为:LC Duplex Fiber Optic Connectors for High Density Environments，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

Comparison of Advantages and Disadvantages Between 40G QSFP+SR4 Optical Module and QSFP+ AOC Active Optical Cable

Both 40G QSFP+SR4 optical transceivers and 40G QSFP+ AOC active optical cables are widely used in 40G data center for short-distance interconnection. Since both can realize short-distance interconnection, what is the difference between them and their advantages and disadvantages? Let‘s reveal the answer to everyone below.

技术探讨发布时间 : 2023-11-15

The General Structure and Common Performance Analysis of Fiber Optic Connectors

The main purpose of the optical fiber connector is to realize the connection of the optical fiber. Now it has been widely used in optical fiber connectors in optical fiber communication systems, with many types and different structures.

技术探讨发布时间 : 2023-09-28

What Is the Relationship Between 5G and Fiber Optics?

Fiber optics is the foundation of 5G. The development of 5G has put forward new requirements for fiber optics infrastructure； that is, high carrying capacity and high connection density of fiber optics are required. The competition of 5G is evolving into the competition of fiber optics infrastructure.

技术探讨发布时间 : 2023-09-17

太辰光（T&S）光纤连接器选型指南

目录- 公司简介 Company profile 陶瓷插芯 Ceramic Ferrule 光纤连接器 Fiber Optic Cable Assembly 光纤元器件 Fiber Optic Components 波分复用器 WDM FBT光纤耦合器 FBT Coupler PLC分路器 PLC Splitter 光纤光栅 Fiber Bragg Grating 光纤模块、有源光缆及有源电缆 Fiber Optic Transceivers,AOC&DAC

型号- FOT-SC/APC,CG-XX/G652D/1.5M,D12F-SC/UPC/SM/∅0.9/L/L1M,SMC-P-1X2-163/15-10/90-FC/APC-1-G652D-∅3X60,FEN-SC-S4,FEN-SC-S5,MC-FC/APC-FC/UPC/SM/∅3/L,FEN-SC-S1,PM-FC/UPC(N)-FC/UPC(N)/1550/∅2/L-SA,FEN-SC-S2,FEN-SC-S3,ATIL-FC/APC/SM/05/NP/L,MPO/APC/12F-FC/UPC/SM/∅0.9-L/L1-RJ,PLC-1X8-A-09/L1-LC/UPC-09/L2-LC/UPC

选型指南 - 太辰光 - 201905 PDF 中英文下载

太辰光（T&S）光纤通信产品选型指南

描述- 深圳太辰光通信股份有限公司成立于2000年，于2016年12月在深圳证券交易所创业板上市，证券代码300570，公司的主营业务为各种光通信器件及其集成功能模块的研发、生产和销售。光通信器件主要包括高密度光纤连接器、常规光纤连接器件、PLC光分路器、波分复用器等无源光器件、光模块、有源光缆等有源光器件以及陶瓷插芯、MT插芯，平面光波导晶圆和芯片等基础元器件。

型号- TSSLS-NCNEE3C,400G QSFP-DD TO 4X100G QSFP56 AOC,200G QSFP56 SR4,400G QSFP-DD TO 8X50G SFP56 DAC,TSSLS-NXXCE3T,TSQM4-NAAJB1C,TSQS-PC40G-XXM,TSD4Q-85M-XXXC,TS-RD1,TS-RD1-1U,TSD8S-85M-XXXC,TSQSQ-85G-XXXC,TSQ45-85G-XXXC,TSQM4-NAAJB1T,TS-FD2,TSSLS-NXXCE3C,TS-FD1-1U,TS-FD1,40G QSFP+TO 4X10G SFP+DAC,PD2-6M,TSSLS-NCNEH8C,40G QSFP+ TO 4X10G SFP+ AOC,TSQS-PC56G-XXM,FEN-LH-SMA,TS-FD2 SERIES,56G QSFP+DAC,40G QSFP+ ER4,TSQD-PC4HG-XXM,200G QSFP56 AOC,10G SFP+ ZR,FEN-LH-LC,100G QSFP28 PSM4,TSSLS-CXXEE3C,25G SFP28 SR,TSSLS-NAACBIT,TSSLS-NAAEAIT,TSQDQ-4PC1HG-XXM,100G QSFP28 AOC,TSSLS-NAACB1C,TSSLS-NAAEA1C,FEN-LH-SDL,10G SFP+ DWDM,MD2-1M24L,TSQL4-E11GH7C,TSQSS-PC2HG-XXM,TSQL4-F22JH4C,FES-LC-PA,25G SFP28 DAC,25G SFP28 CWDM,400G QSFP-DD DAC,400G QSFP-DD DR4,TSSLS-NCNCE3C,400G QSFP-DD TO 2X200G QSFP56 DAC,MD1-3M24L,TSSP-PC25G-XXM,TSD2Q-85L-XXXC,200G QSFP56 TO 4X50G SFP56 AOC,56G QSFP+ AOC,TSSP-PC56G-XXM,TSQS-PC2HG-XXM,100G QSFP28 SR4,10G SFP+ LR,TSQM4-NCNJC3C,TSQSS-PC1HG-XXM,TS-RD1 SERIES,TSSSS-85H-XXXC,TSQDQ-2PC2HG-XXM,50G SFP56 AOC,40G QSFP+ DAC,TS-FD1 SERIES,TSQSQ-85H-XXXC,TSQM4-NAALAIC,FEN-SC-FUNNEL-1,PD2-24L,FEN-SC-FUNNEL-2,TSQM4-NAAGB1C,TSQM4-NAAGBIT,TSSSS-85E-XXXC,40G QSFP+ LR4,TSSLS-CXXCE3C,FES-SC-PA,TSQS-PC1HG-XXM,200G QSFP-DD TO 2X100G QSFP28 AOC,100G QSFP28 TO 2X50G QSFP28 AOC,TSSLS-DXXEE4C,10G SFP+ DAC,25G SFP28 BIDI,TSSLS-NCNEE3T,100G QSFP28 LR4,TSQ4S-85L-XXXC,TSQSQ-85L-XXXC,100G QSFP28 DAC,TSDM4-NCNMC3C,25G SFP28 ER,10G SFP+ AOC,10G SFP+ BIDI,400G QSFP-DD TO 8X50G SFP56 AOC,800G QSFP-DD AOC,TSQM4-NCNGC3C,TSDR8-NAAMATC,TS-FD2-2U,10G SFP+ CWDM,10G SFP+SR,FEN-LC-2,25G SFP28 DWDM,TSSSS-85C-XXXC,TSDSD-85N-XXXC,100G QSFP28 TO 4X25G SFP28 AOC,TSQDS-8PC50G-XXM,800G QSFP-DD SR8,10G SFP+ ER,200G QSFP56 DAC,100G SFP-DD AOC,TSSLS-DXXCK8C,TSQ2Q-85J-XXXC,TSSLS-NCNCE3T,TSQSQ-PC2HG-XXM,TSD2Q-85M-XXXC,FEN-LH-SC,TSSLS-NXXEE3T,200G QSFP56 FR4,40G QSFP+ AOC,50G SFP56 DAC,100G QSFP28 TO 4X25G SFP28 DAC,100G QSFP28 ER4,FEN-SC-1,TSDSD-85M-XXXC,400G QSFP-DD FR4,TSDL4-E11MD3C,100G QSFP28 CWDM4,TSSLS-NXXEE3C,25G SFP28 LR,40G QSFP+PSM4,TSQL4-F22JE3C,400G QSFP-DD TO 2X200G QSFP56 AOC,TSTST-85K-XXXC,400G QSFP-DD AOC,TSQSQ-85J-XXXC,TSQ4S-85J-XXXC,TSD85-85L-XXXC,TSQL4-E11JE3C,TSDR8-NAANA1C,TSSLS-NCNCKBC,200G QSFP56 TO 4X50G SFP56 DAC,TSQL4-E11LD3C,400G QSFP-DD TO 4X100G QSFP56 DAC,200G QSFP-DD TO 8X25G SFP28 AOC,TSSLS-NCNCH4C,MD1-2M6M,200G QSFP56 TO 2X100G QSFP56 DAC,25G SFP28 AOC,PD1-24L,TSQL4-E11GE3C,400G QSFP-DD SR8,40G QSFP+SR4,TSQSS-PC40G-XXM,TSSLS-DXXCH4C,TSSP-PC192-XXM

选型指南 - 太辰光 - 202304版 - 202304 PDF 中文下载

数据中心光互联技术及应用研讨会圆满落幕，太辰光介绍了自主研发的高密度、高可靠、低插损光背板连接技术

数据中心光互联技术及应用研讨会圆满落幕2020-09-23 11:23:199月10日，主题为“数据中心光互联技术及应用”的研讨会在深圳国际会展中心顺利召开，政府部门、中国联通、太辰光的领导和业内著名的技术专家、嘉宾参与会议研讨。

厂牌及品类发布时间 : 2024-07-26

太辰光（T＆S）成立于2000年，2003年3月通过SGS机构的ISO9001: 2000质量管理体系认证，2003年4月被深圳市科技和信息局认定为深圳市高新技术企业，2010年9月被认定为国家高新技术企业。太辰光（T＆S）的主营业务为各种光通信器件及其集成功能模块的研发，制造和销售。

无源产品光互联基础元器件 PLC晶圆 PLC芯片陶瓷插芯 MT插芯光连接器件高速光块 AOC线缆连接方案常规光纤连接器高密度光纤连接器光纤回路器光接续器件光通信适配器光通信衰减器光通信接头光纤终端器光分路器件光通信耦合器波分复用器 PLC光分路器光通信集成功能模块 MTP-LC模块光模块有源光缆（AOC）高速电缆（DAC）光纤传感光纤光栅（FBG）锁模光栅传感光纤光栅传感光纤光栅串啁啾光纤光栅光纤传感器光纤光栅压力传感器光纤光栅振动传感器光纤光栅应变传感器光纤光栅温度传感器光纤F-P腔超声传感器声像仪光纤光栅传感分析仪高速光纤光栅传感分析仪光纤光栅反射器

授权代理商 - 世强先进（深圳）科技股份有限公司线上商城技术资料

展开

太辰光推出的保偏光纤连接器，具有高消光比≥23dB、高pitch精度、偏转角≤±3°的优势

保偏光纤连接器作为一种特殊类型的连接器，广泛应用于光纤传感、干涉测量、相干光传输及长距离双向光传输系统中。相比于常见的单芯保偏连接器，多芯保偏连接器可以传输多个保偏光信号，同时保持其偏振方向不变。

厂牌及品类发布时间 : 2023-04-14

【元件】太辰光通信推出新型光纤智能螺栓，直接将光栅应变片直接粘贴在螺栓孔内其灵敏度相比于传统方案至少提高5倍

太辰光公司开发的新型光纤智能螺栓是直接将光栅应变片直接粘贴在螺栓孔内，让光栅应变片能够快速“感受”螺栓内部的应变，其灵敏度相比于传统方案（即毛细钢管方案）至少提高5倍。此外，光纤智能螺栓还自带温补功能，很好解决了温度与应变交叉敏感问题，使得测量更加准确。

产品发布时间 : 2024-04-03

【产品】太辰光推出SEN-T-04型温度传感器，适用于电力电缆、石化管道、储油罐、地铁消防等领域温度监测

SEN-T-04型温度传感器是太辰光利用光想光栅固有的温度敏感特性感测温度，光纤光栅采用特殊方式封装，增加了传感器对温度的敏感性，防水性能好，响应速度快，特别适用于电力电缆、石化管道、储油罐、地铁消防、隧道防火、水利工程等领域的温度监测。

产品发布时间 : 2022-06-12

MTP®/MPO光纤连接器生产商、光器件研发制造专家太辰光签约世强，全线产品符合 IEC和 TIA标准

2022年1月1日，太辰光（股票代码：300570）与世强签订合作协议，授权世强代理旗下全线产品，太辰光的光互联基础元器件、PLC晶圆、陶瓷插芯、MT插芯、光连接器件等产品已上线平台，搜索“太辰光”即可查询相关资讯、申请免费样品。

公司动态发布时间 : 2022-05-31

Fused WDM

数据手册 - 太辰光 - Version 1.0 - 2024/2/17 PDF 中文下载查看更多版本

How to Define the Three Value Standards of the End Face of the Patchcord?

The two end faces of the fiber must be precisely butted so that the light energy output by the transmitting fiber can be coupled to the receiving fiber to the maximum extent. The successful connection of optical fiber lines depends on the quality of the physical connection of the optical fibers.

设计经验发布时间 : 2023-10-07