TDK Announces the InvenSense ICP-10125 Waterproof SmartPressure™ Sensor Platform, Achieving the Industry’s Lowest Pressure Noise of 0.4 Pa RMS
Industry’s lowest power waterproof MEMS barometric pressure sensor
IPX8 compliant: Waterproof to 10 ATM or more than 100 meters
Suitable for smart watches, fitness trackers, and outdoor IoT applications
TDK Corporation (TSE: 6762) announces worldwide availability of the InvenSense ICP-10125, part of the SmartPressure™ family of the MEMS barometric pressure sensor platform. The ICP-10125 achieves the industry’s lowest pressure noise of 0.4 Pa RMS, attains the industry’s lowest power consumption of 1.3 µA, and ensures excellent temperature stability with a temperature coefficient of ±0.5 Pa/°C.
The ICP-10125 device combines a barometric pressure and a temperature sensor in a small 3.55 mm x 3.55 mm x 1.45 mm chimney package with waterproofing gel, providing IPX8 waterproofing to 10 ATM. The uniform machined lid and chimney with groove enable easier handling at production and assembly of customer products. The solution is aimed at the fitness, smart watch, and portable device markets that assist in fitness activity monitoring, location tracking for E911 calls, and indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection).
The InvenSense SmartPressure™ family uses an innovative capacitive MEMS architecture to deliver lower power consumption and lower noise than competing pressure sensors technologies. With its ultra-low noise and low power consumption, ICP-10125 is ideally suited for wearable fitness monitoring and battery powered IoT. It can measure height change as small as 8.5 cm, less than the height of a single stair step.
“ICP-10125 delivers high accuracy, low power, temperature stability, and waterproofing in a small package footprint targeting the wearable market,” said Uday Mudoi, Director of Product Marketing at InvenSense, a TDK group company. “It enables determination of accurate location of E911 calls, tracks changes in elevation for activity monitoring, and extends battery life of always-on motion sensing applications.”
InvenSense ICP-10125 is currently available for worldwide distribution. A comprehensive development kit (DK-10125) and evaluation platform are also available along with necessary software to enable quick-to-market development of customer systems. In addition to the ICP-10125, the ICP-10101 and ICP-10111 pressure sensor products are already available in worldwide distribution.
Main applications
Smart watches
Leisure, sports, and fitness activity monitoring for wearable sensors
Altimeters and barometers for portable devices
Indoor/outdoor navigation (dead-reckoning, floor/elevator/step detection)
Home and building automation
Main features and benefits
Pressure operating range: 30 to 110 kPa
Multiple modes for noise and power optimization
- 4 Pa @ 10.4 µA (Ultra low noise mode)
- 8 Pa @ 5.2 µA (Low noise mode)
- 2 Pa @ 1.3 µA (Low power mode)
Pressure sensor temperature coefficient offset: ±0.5 Pa/ C
IPX8: waterproof to 10 ATM
Temperature operating range: -40 °C to 85 °C
Key Data
- |
- +1 赞 0
- 收藏
- 评论 0
本文由上山打老虎转载自TDK InvenSense News,原文标题为:TDK announces worldwide availability of the InvenSense ICP-10125 waterproof SmartPressure™ platform,本站所有转载文章系出于传递更多信息之目的,且明确注明来源,不希望被转载的媒体或个人可与我们联系,我们将立即进行删除处理。
相关推荐
【产品】TDK InvenSense气压传感器SmartPressure产品可测量小至5cm变化,提供10ATM防水支持
TDK InvenSense 气压传感器采用创新的电容式 MEMS 架构,比其他竞争技术提供更低的功耗和噪音。SmartPressure 产品可以测量小至 5cm 的高度变化,小于一级楼梯台阶的高度。凭借其行业领先的测量精度和超低功耗操作的始终在线的应用,SmartPressure 产品系列完美适用于智能手机、平板电脑、可穿戴设备、无人机和许多其他设备。
探索TDK InvenSense增强现实技术,预见AR眼镜新纪元
AR和VR技术正逐渐改变我们的生活,其中VR提供沉浸式体验,而AR眼镜可能取代部分智能手机功能,如通话和导航。尽管存在技术挑战,如尺寸、重量和成本,TDK InvenSense的技术进步正推动AR眼镜的发展,使其更轻便、功能更强大,未来可能成为日常生活的重要工具。
ROHM(罗姆)传感器产品选型指南(英文)
目录- Company Profile Motion Sensors Environment Sensors Interface Wireless Communication Sensor Control Evaluation Kits R&D Sensors Thin-Film Piezoelectric MEMS Service Package
型号- BU52492NUZ,BH1790GLC,BU52274NUZ,BU52040HFV,WQFN32,WSOF5,WQFN40,WSOF6,RLD82PZJ1,SIR-568ST3F,RPMD-0100,TCM 310,ML7396D,RPT-38PB3F,ML7396A,RLD94PZJ5,BU21170 MUV,BU52074GWZ,BU21180FS,RLD94PZJ7,SOP16,RPR-0521RS,USB 400J,RPI- 441C1E,STM 431J,KXG07,ECO 200,BH1900NUX,KXG08,BU52073GWZ,BU21077MUV,BU21029MUV,VQFN028V5050,KX022-1020,BP35A1,BM1386GLV,BP35C2,BM1383AGLV,KX122-1037.KX122-1037,BP35C0,VQFN024V4040,SIM-22ST,BU21025GUL,PTM 330,BH1620FVC,ML7404,ML7406,PTM 210,BH1682FVC,WSON008X2120,RLD85PZJ4,WLGA010V28,ML7416N,BU52075GWZ,BDJXXX0HFV,BU52098GWZ,RPI-441C1,BH1726NUC,RPI-0352E,BD9251FV,BH1749NUC,BU21170MUV,BD1020HFV,BU52493NUZ,RPI-222,SSOP5,VSON008X2030,KX122-1037,RPI-221,RLD85NZJ4,PTM 210J,SSON004X1216,BU52494NUZ,1053KX222,ML630Q464,RLD84NZJ2,ML630Q466,KMX62-1031,BU52092GWZ,RPT-34PB3F,KX123-6000,BH1721FVC,ML7066,BU21079F,K X112-10 42,KX224-1053,BU52097GWZ,RPI-441C1E,KX126-1063,BH1792GLC,PTM 430J,BU52273NUZ,RLD84PZJ2,RPR- 0521RS,STM 429J,ML610Q793,STM 300,ML620Q503H,BU21027MUV,TCM 410J,ML7344J,ML7344C,BU21023GUL,BH1680FVC,KX222,BM1422AGMV,MK71251-02,MK71251-01,SIM-030ST,BP3580,KX112-1042,ML620Q504H,BH1730FVC,BU52054GWZ,MK71050-03,BP359B,ML7345D,ML7345C,BP3599,SIR-34ST3F,RPI-352,BP3595,BGA81,KXTC9,RPT-37PB3F,BP3591,BU52272NUZ,BU52792GWZ,SIM-040ST,KX126 -1063,ML630Q791,VCSP50L,SIR-563ST3F,BH1603FVC,RLD94NZJ7,RLD94NZJ5,RPI-125,RPI-246,RPI-121,USB 300,C-QFN24,RPI-122,RPI-243,BU21028FV-M,RPM-22PB,SIR-341ST3F,BU21026MUV,KX222-1054,SSOP-B20,VQFN020V4040,SSOP-B28,SIR-56ST3F,BU21023MUV,BU52078GWZ,UCSP35L,HVSOF5,ML62Q1000,KX124-1051,SSOP-B14,KXCJB-1041,KXTJ3-1057,BD7411G,BU52095GWZ,BU21072MUV,K X TJ3 -10 57,BU52177GXZ,BU21078FV,KXG03,KXG07-1080,BU21024FV-M,RPI-0226,ML610Q794G,MK71251-02B,MK71251-02A,RPI- 441C1,BU52077GWZ,VQFN48,ML7345,STM 320,RLD82NZJ1,HSM 100,BU52055GWZ,BU21029GUL,RPM-20PB,STM 400J,BU52072GWZ,SIM-20ST,KX123,KX122,BU21078MUV,RPI-0125,STM 331,ML8540
用于ICM-42670-P 6轴运动传感器的DK-42670-P开发套件
描述- 本资料介绍了InvenSense公司推出的DK-42670-P开发套件,该套件是为高性能6轴运动传感器ICM-42670-P设计的综合平台。它集成了3轴陀螺仪和3轴加速度计,并围绕Microchip G55 MCU设计,旨在帮助开发者快速评估和发展基于ICM-42670-P的解决方案。开发套件包含板载嵌入式调试器,无需外部工具即可编程或调试G55 MCU。此外,还提供了必要的软件,包括基于GUI的开发工具InvenSense Motion Link和用于ICM-42670-P的嵌入式驱动程序。
型号- DK-42670-P,ICM-42670-P
NPB 102数字输出绝对压力传感器
描述- NPB 102是一款数字输出的绝对压力传感器,适用于低成本应用。它具有标准4x4毫米QFN封装,适合汽车(AECQ-100认证)、便携式电子设备和空间受限的应用。该传感器采用MEMS压力传感器和信号调理IC,提供从26kPa到200kPa的压力测量精度。
型号- NPB-102I-0126A,NPB-102I-0200A,NPB 102,NPB-102X-XXXX
【选型】ROHM(罗姆)LAPIS 8/16/32bit微控制器(MCU)选型指南(英文)
目录- Microcontrollers introduction 16bit General-Purpose MCUs 16bit Low Power MCUs 8bit Low Voltage MCUs 8bit Audio Playback MCUs 32bit USB Inter Face and Security Fanction MCUs 8bit/16bit MCU Development Support System MCUs Specification and Part Number Explanation
型号- ML62Q1713,ML610Q419C-NNNTBXXXX,ML62Q1714,ML610Q409P,ML62Q1557,ML62Q1711,ML62Q1712,ML62Q1555,ML62Q1556,ML62Q1710,ML62Q1723C,ML62Q1553,ML610Q429,ML62Q1554,ML62Q1551,ML62Q1552,ML62Q1550,ML62Q1300 GROUP,ML610Q431,ML610Q438,ML620Q503H,ML610Q439,ML610Q436,ML610Q435,ML62Q1704,ML610Q432,ML62Q1724,ML610Q408P,ML62Q1725,ML62Q1722,ML62Q1723,ML62Q1323,ML62Q1566,ML62Q1720,ML62Q1567,ML62Q1721,ML62Q1734C,ML62Q1325,ML62Q1564,ML610Q418,ML62Q1324,ML62Q1565,ML610Q419,ML62Q1563,ML610Q436A,ML62Q1544C,ML62Q1700 GROUP,ML610Q409A,MWU16,ML610Q306,ML610Q428,ML610Q412P,ML610Q304,ML610Q426,ML610Q305,ML610Q300,ML620Q504H,ML610Q421,ML610Q422,ML62Q1533,ML610Q409,ML62Q1733C,ML62Q1534,ML62Q1531,ML610Q407,ML62Q1532,ML610Q408,ML62Q1543C,ML62Q1530,ML610Q435A,ML610Q407D,ML610Q419C,ML610Q407A,ML610Q411P,ML610Q412,ML610Q411,ML610Q407P,ML62Q1702,ML62Q1703,ML620Q500,ML62Q1700,ML62Q1701,YQPACK064SA,ML62Q1544,ML62Q1300,ML62Q1542,YQPACK064SD,ML610Q407PA,ML62Q1543,ML62Q1540,ML62Q1554C,ML62Q1541,ML610Q418C,MODEL308,ML62Q1800 GROUP,ML610Q482,ML62Q1000 SERIES,ML610Q422P,ML610Q400,ML62Q1878,ML62Q1879,MODEL404E+,ML630Q400,MODEL400E+,ML62Q1553C,MODEL408E+,EASE1000 V2,NQPACK064SA,ML610Q421P,ML610482,ML610400,ML610Q411PA,ML62Q1748,ML62Q1869,ML62Q1749,LEXIDE-U16,MODEL416E+,ML62Q1800,ML62Q1366,ML610Q432A,ML62Q1367,ML62Q1714C,ML62Q1000,ML62Q1365,ML62Q1564C,ML62Q1500 GROUP,ML62Q1735,ML62Q1736,ML62Q1733,ML62Q1734,ML62Q1335,ML62Q1577,TEC-064SD-KC,ML610Q431A,ML630Q464,ML62Q1333,ML62Q1575,ML62Q1713C,ML62Q1334,ML62Q1576,ML630Q466,ML62Q1573,ML62Q1574,ML62Q1563C,DR.1000,ML62Q1728,ML62Q1729,ML62Q1726,ML610Q439P,ML62Q1727,ML62Q1746,ML62Q1747,ML62Q1868,ML610482P,ML62Q1744,ML62Q1745,ML62Q1346,ML62Q1500,ML62Q1347,ML62Q1743,ML62Q1724C,ML62Q1345,TEC-064SA-KC,ML610Q426C,DR1000-FLQ-64,ML610Q482P,MODEL400E+SERIES,NQPACK064SD-ND,ML62Q1739,ML62Q1737,ML62Q1858,ML62Q1738,ML62Q1859
CPS710D表压传感器数据表
描述- CPS710D是一款全硅结构的MEMS压力传感器,具有防水特性,适用于-40℃至125℃的环境温度。该传感器可实现0~700kPa的精确压力测量,专为低成本和长期高可靠性压力测量设计,适用于家用电器、医疗、运动和工业压力测量等领域。
型号- CPS710D040SP,CPS710D,CPS710D-040SP
MS5837-02BA压力和温度传感器数据手册
型号- MS5837,MS583702BA01-50,20000983-00,MS5837-__BA__,MS5837-02BA06,20000979-00,MS5837-02BA26,MS5837-02BA01,10207018-00,MS5837-02BA,MS5837-02BA21
TDK RoboKit1
描述- TDK RoboKit1 是一款集成了传感器、处理器和执行器的多功能机器人平台,适用于快速原型设计和开发。该平台整合了多种产品,包括六轴惯性测量单元(IMU)、工业级IMU模块、电容式气压传感器、数字I²S麦克风、温度传感器、超声波飞行时间(ToF)传感器、磁力计和电机控制器。它还提供了障碍物检测、地面类型检测、悬崖检测等功能,并支持ROS驱动程序。
型号- TDK ROBOKIT1,AK09918C,ICM-42688-P,ICP-10111,TDK_ROBOKIT1-DK,ICS-43434,IIM-46230,HVC4223F,TDK_ROBOKIT1,CH-101,CH-201
TDK Launches InvenSense Sensor Partner Program to Empower IoT innovation with Sensor Technology
This paper mainly introduces the information of TDK‘s InvenSense Sensor partner program to promote iot innovation through sensor technology, and introduces the ecological partners specific from controllers to chip introduction solutions
TE Connectivity(泰科)板装式压力传感器选型指南
目录- Board Mount Pressure Sensors
型号- MS4515,1220,MS5840-02BA,MS5536X,MS54XX,1240,MS5637X,MS5803X,MS4515DO,MS5837X,MS52XX,MS5805-02BA,1210,MS52XX C&T,MS5534C,MS5201-XD,47 SERIES,37 SERIES,MS5540C,MS5611-01BA,MS4525,MS4426,MS4425,MS5839-02BA,MS1451,43 SERIES,1230,MS4525DO,50 SERIES,MS1471,MS5541X,22 SERIES,23 SERIES,MS5535X,13 SERIES,17 SERIES,MS5607-02BA,MS8607,33 SERIES,MS5525DSO,27 SERIES
SmartMotion开发平台(G版)硬件用户指南
型号- IIM-42653,DK-42670-P,IIM-42652,IIM-42352,IIM-42351,DK-20100,DK-42351,ICM-40627,DK-42352,DK-42652,DK-42653,ICP-20100,ICM-42686-P,ICM-42688-P,ICM-42688-V,DK-42370-P,IIM-20670,DK-20670,ICM-42370-P,DK-42688-V,DK-42688-P,ICM-42670-P,DK-40627,AT32UC3A4256HHB-C1UR,DK-42686-P
What does the hardware do and what does the BSP do? Does the hardware without any additional mcu have the quaternion 6 dof fusion output? Is there any hardware that can combine a compass in the attitude results?
The motion algorithms has two major components to it, sensor fusion and calibration. Sensor fusion runs on the DMP (in hardware), while calibration runs on the micro. The hardware sensors (Gyro, and Accel) detect motion, while the BSP has manages the I2c, Timer, and Non volatile memory interfaces. The hardware does perform 6-axis (dof) sensor fusion through the dedicated DMP computation engine. The next release of Embedded MPL software will enable 9-axis sensor fusion that runs in a fully self contained fashion on the DMP. Currently the DMP does not support 9-axis sensor fusion due to a degraded performance. We are planning to eventually push full 9-axis operation to the DMP. 10 axis (altitude) sensor fusions can be performed on the MCU by taking the 9-axis sensor fusion results from hardware, and combining with altitude information from a pressure sensor.
MPS-3110系列压力传感器
描述- 该资料介绍了Metrodyne Microsystem Corp生产的MPS-3110系列压力传感器。这些传感器具有竞争性的价格、宽泛的工作温度范围、固态可靠性、易于使用等特点,适用于多种应用场景。
型号- MPS-311X_GRC SERIES,MPS-3117-015GC,MPS-3117,MPS-3110 SERIES,MPS-3118,MPS-3118-015GRC,MPS-3113-006GRC,MPS-3113-006GC,MPS-3118-006GC,MPS-3117-006GRC,MPS-3118-030GC,MPS-3118-030GRC,MPS-311X_GC SERIES,MPS-3118-006GRC,MPS-3113-015GRC,MPS-3117-015GRC,MPS-3118-100GC,MPS-311X_GC,MPS-3117-001GC,MPS-3117-006GC,MPS-3113-015GC,MPS-3117-001GRC,MPS-3118-015GC,MPS-311X_GRC,MPS-3110,MPS-3113,MPS-3118-100GRC
WATTUP PowerHub开发套件用户指南应用说明
描述- 本资料介绍了Energous/Dialog公司WattUp PowerHub开发者套件的使用指南。该套件支持使用WattUp技术进行无线充电系统测试。内容包括技术概述、开发套件概述、基本使用方法、硬件LED指示、用户案例、调试程序、已知问题和固件更新等。资料详细说明了如何通过WattUp应用程序进行系统测试,并提供了不同接收器的放置和调试方法。
型号- DA2223,DA14682,EN3913M,BQ25120A,DA4100,EN3921,DA14585
电子商城
现货市场
登录 | 立即注册
提交评论