How Much Do You Know about the Hot and Cold Sides of the Refrigeration Sheet?

时间： 2023-07-14 来源：Aurin News

The use of refrigeration film is very common in our life. What do you know about the hot and cold surfaces of the refrigeration piece? Do you know what the requirements are for the hot and cold surfaces of this device?

1. A dry battery can be used to test the quality and cold and hot sides of the refrigeration sheet. One hand connects the red line of the refrigeration sheet to the positive pole of the battery, and the black line presses on the negative pole of the battery. The other hand holds both sides of the refrigeration sheet. If one side is slightly hot and the other side is slightly cold, it indicates that the refrigeration sheet is good, and it is determined that the slightly hot side is the hot side and the slightly cold side is the cold side.

2. According to the welding position of the lead wire, the cold and hot side of the refrigeration sheet is usually welded on the hot surface of the refrigeration sheet. Therefore, when the red wire of the refrigeration sheet is connected with the positive electrode and the black wire is connected with the negative electrode, the side with the lead wire is the hot side, and the other side is the cold side.

3. According to the marking surface (printed face) judge the cold and hot side of the refrigeration piece. On the premise that the red line of the refrigeration piece is connected with the positive pole and the black line is connected with the negative pole, the marking face of the refrigeration sheet in our shop is the cold side; on the premise of the red line connecting the negative pole and the black line connecting the positive pole, the marking face is the hot side. Note: only the single-layer refrigeration piece can be connected with positive and negative electrodes, and the multi-layer refrigeration sheet must be connected with the red line and the black line with the negative pole, and the switching connection is not allowed.

4. According to the position of the lead wire, the cold and hot sides of the refrigeration sheet can be distinguished. The lead line is downward, the red line is on the right side, and the black line is on the left side. When the red line of the refrigeration sheet is connected with the positive electrode and the black line is connected with the negative pole, the side of the single-layer refrigeration sheet is the hot side if the red line and black line are connected to each other.

The above is for the introduction of the cold and hot sides of the refrigeration piece.

发送到邮箱 |
+1 赞 0
收藏
评论 0
| 转发至：

本文由三年不鸣转载自Aurin News，原文标题为:How much do you know about the hot and cold sides of the refrigeration sheet?，本站所有转载文章系出于传递更多信息之目的，且明确注明来源，不希望被转载的媒体或个人可与我们联系，我们将立即进行删除处理。

全部评论（0）

暂无评论

【经验】解析如何判断制冷片的冷热面

制冷片在生活当中的使用十分的普遍，那么的对于制冷片的冷热面你有哪些了解呢?本文杭州澳凌将针对制冷片冷热面判断方法进行介绍。

2021-11-28 - 设计经验

【经验】解析半导体致冷片结露形成的原因及解决办法

半导体致冷片是利用半导体的热电效应产生冷能的装置，也称为热电冷却器。当两种不同的金属通过导体连接并连接到直流电时，一个接头的温度会降低，而另一个接头的温度会升高，本文就让杭州半导体制冷片公司澳凌为你介绍下半导体致冷片结露形成的原因和解决办法。

2022-03-22 - 设计经验

【经验】一文教你提高制冷片的效率

制冷片作为在生活当中使用的一种性能比较出色的装置，今天澳凌就来为你讲解下影响制冷片效率的因素都有哪些？

2021-12-06 - 设计经验

【技术】一文掌握半导体制冷片四种常见的参数

半导体制冷片被称为温差电致冷组件，又因帕尔贴原理被称作帕尔贴。制冷片本身并无制冷效果，其原理为把热量从冷面传输到热面，再由热面的散热设备散发出热量，是一种专门用来传送热量的工具。为了更方便大家选择合适的产品，本文由澳凌来介绍一下制冷片四种常见的参数。

2021-11-09 - 技术探讨

【技术】解析如何判断半导体制冷片的好坏

半导体制冷片的好坏可以采用万用表测量其电阻，电流或者电压来进行判断，半导体制冷片电阻正常范围为0-0.05Ω，半导体制冷片电流正常范围为0-0.09A，半导体制冷片电压正常范围为0-0.1V。本文澳凌将解析如何判断半导体制冷片的好坏。

2021-11-17 - 技术探讨

制冷片参数表（支持尺寸定制）(Peltier Module Parameter Specification)

描述- 本资料为制冷片参数表，详细列出了不同型号制冷片的最大电压、最大电流、最大温差、最大产冷率、元件对数和外形尺寸等参数。资料中包含多种型号的制冷片，支持尺寸定制，适用于不同应用场景。

型号- TES1-3103,TEC1-6306,TES1-7103,TEC1-0704,TEC1-0703,TES1-0703,TEC1-12718,TEC1-12716,TEC1-12714,TEC1-12712,TEC1-12710,TES1-4903,TES1-6303,TEC1-7108,TES1-12702,TEC1-7109,TES1-12703,TEC1-12709,TES1-12704,TEC1-12708,TEC1-12707,TEC1-12706,TES1-1704,TEC1-12705,TEC1-12704,TEC1-7103,TEC1-12703,TEC1-7104,TEC1-7105,TEC1-7106,TEC1-12720,TEC1-3103,TES1-1703,TES1-3505

2023/6/14 - 澳凌 - 快速参考指南

专业的热电材料及半导体制冷片研发生产高新技术企业——澳凌（Aurin）

杭州澳凌制冷设备有限公司成立于2007年，是一家专业生产热电材料、半导体制冷片、温差发电片、微型制冷片，多级制冷片等系列产品的高新技术企业，致力于拓展热电模块的新应用。

2021-11-25 - 品牌简介

TEC1-12704制冷片

描述- 杭州澳凌制冷设备有限公司提供的制冷片检测报告显示，产品型号为TEC1-12704，规格为30x30mm，编号为HZAU171104。该产品符合国际标准，工作温度范围为-50至150℃，最大电流4A，最大电压15.4V，最大产冷功率33。产品尺寸精确，瓷片规格和元件对数明确，焊料和引线标准符合环保要求，包装标准详细。

型号- HZAU171104,TEC1-12704

2023/6/14 - 澳凌 - 测试报告查看更多版本

【技术】一文了解半导体致冷片

本文澳凌将为你详细介绍半导体致冷片。半导体致冷片，起初是由前苏联缓建我国军事项目发展开来的，它的真正的名字叫半导体致冷片，而非半导体制冷片，因其“致”与“制”同音，因大部分人习惯叫作制冷片。主要作用目前有致冷和致热（使用电时），发电（温差时）

2021-11-13 - 技术探讨

【技术】探讨N型半导体和p型半导体之间的区别

半导体制冷片在我们生活当中使用比较普遍，市场上这种类型的半导体制冷片类型有很多，本文澳凌将介绍关于N型半导体和P型半导体之间区别。

2021-12-03 - 技术探讨

Semiconductor Peltier In Medical Application

In fact, the application of semiconductor Peltier is very strict. In view of this point, today we will explain to you the medical application of thermoelectric Peltier.

2023-07-13 - 技术探讨

Do You Know Some Precautions In The Use of Semiconductor Refrigeration Chips?

As a device with excellent performance, semiconductor refrigeration film must be familiar to all of you. Today, we will introduce the matters needing the attention of semiconductor refrigeration chips to you.

2023-07-12 - 设计经验

【技术】解析半导体制冷片的优点和特点

半导体制冷片是一种特殊的冷源，在技术应用中具有很多的优势和特点。那么半导体制冷片的优点和特点是什么?本文中澳凌将为大家一起来分析一下。

2022-07-02 - 技术探讨

【技术】解析购买半导体制冷片时需关注的主要参数

半导体制冷片作为一种在我们生活当中使用出色的装置，想必大家对制冷片一定不陌生，本文杭州澳凌将为您介绍在购买半导体制冷片时需要关注的参数。

2021-12-14 - 技术探讨

What Are The Differences between N-type and P-type Semiconductors?

Semiconductor refrigeration chip is widely used in our life. There are many types of semiconductor refrigeration chips in the market. we will explain to you the differences between n-type semiconductors and p-type semiconductors. Let‘s introduce Hangzhou semiconductor refrigeration film for you.

2023-07-11 - 技术探讨